Grundig Color Television Vision 7 37 7952 T Users Manual 02Vision 37_42 7952_en

VISION 7 37-7952 T to the manual 0b338569-3156-452e-9c14-3dbf7f06841d

2015-02-02

: Grundig Grundig-Color-Television-Vision-7-37-7952-T-Users-Manual-429938 grundig-color-television-vision-7-37-7952-t-users-manual-429938 grundig pdf

Open the PDF directly: View PDF .
Page Count: 54

Download
Open PDF In Browser	View PDF

COLOR TELEVISION
VISION 7 37-7952 T
VISION 7 42-7952 T

CONTENTS------------------------------------------------------------------------------------------------

SET-UP AND SAFETY

GENERAL INFORMATION

6
6
6

Special features of your television
Receiving digital stations
What is Common Interface?

CONNECTION/PREPARATION

7
8

Connecting the antenna and the mains cable
Inserting batteries in the remote control

OVERVIEW

9
10
11

Connections on the television
Controls on the television
The remote control

SETTINGS

13
14
16
17

Searching for television stations
Changing stored channels for digital stations
Picture settings
Audio settings

TELEVISION OPERATION

20
21
22
22
23

Basic functions
Zoom function
Zap function
Electronic TV guide
Changing the picture format

TELETEXT MODE

24
24
24

TOP text or FLOF text mode
Normal text mode
Additional functions

CONVENIENCE FUNCTIONS

26
27
29

Convenience functions
Parental control
Timer functions

USB-MODE

31
32
33
34
34
35

The ﬁle formats
Connecting external data media
The ﬁle browser
Settings in the USB setup menu
Playback – Basic functions
Additional playback functions

USING EXTERNAL DEVICES

37
37
37
39
40
41
41

DVD player, DVD recorder, video recorder or set-top box
High deﬁnition – HD ready
Connecting a DVD player, DVD recorder, video recorder or set-top box
Headphones
Decoder or satellite receiver
Camcorder
Hi-ﬁ system/AV receiver

PC MONITOR MODE

42
42
42

Connecting a PC
Selecting the channel position for the PC
Settings for the PC

OPERATION WITH COMMON INTERFACE

43
43

Inserting the CA module
Access control for CA module and smart card

SPECIAL SETTINGS

44
45
47

Tuning digital television stations
Tuning analogue television stations
Changing stored channels for analogue stations

INFORMATION

49
49
50
51
51
51
52
53

Displaying signal information
Updating software
Dismantling the stand of the unit
Technical data
Service information for dealers
Environmental note
Troubleshooting
Additional Information for units sold in the UK.

ENGLISH

CONTENTS------------------------------------------------------------------------------------------------

SET-UP AND SAFETY -----------------------------------------------------------Please note the following information when setting up your television
set.
This television set is designed to receive and display video and audio
signals.
Any other use is expressly prohibited.
External light falling on the screen impairs picture quality.
To assure suﬃcient ventilation make sure there is enough space
around it in the wall unit.
The television set is designed for use in dry rooms. If you do use it in
the open, please ensure that it is protected from moisture, such as
rain or splashing water. Do not expose the television set to any moisture.
Do not place any vessels such as vases on the television, as they may
spill liquid, thus presenting a safety risk.
Place the television set on a solid, level surface. Do not place any
objects such as newspapers on the television set or cloth or similar
items beneath it.
Do not place the television set close to heating units or in direct sunlight, as this will impair cooling.
Heat build-up can be dangerous and shortens the operating life of
the television set. For reasons of safety, have a specialist remove any
dirt deposits in the set from time to time.
Do not open the television set under any circumstances. Warranty
claims are excluded for damage resulting from improper handling.
Make sure the power cord or the power supply unit (if provided) are
not damaged.
The television set may only be operated with the mains cable/
adapter supplied.
Thunderstorms are a danger to all electrical devices. Even if the
television set is switched oﬀ, it can be damaged by a lightning strike
to the mains or the antenna cable. Always disconnect the mains and
antenna plugs during a storm.
Clean the screen with a soft, damp cloth. Only use plain water.
Only clean the television housing with the cloth provided. Only use
plain water.
Please note when deciding where to put the device that furniture
surfaces are covered by various types of lacquer and plastic, most
of which contain chemical additives. These may cause corrosion to
the feet of the device, thus resulting in stains on the surface of the
furniture which can be diﬃcult or impossible to remove.

SET-UP AND SAFETY -----------------------------------------------------------The screen of your LCD television meets the highest quality
standards and has been checked for pixel faults.
Despite the great care taken in manufacturing, technological
reasons make it impossible to completely discount the possibility that
some pixels may be faulty.
Provided they are within the thresholds speciﬁed by the DIN norm,
pixel faults of this kind cannot be regarded as a defect as deﬁned by
the warranty.
Notes:
Do not connect any other equipment while the device is switched
on. Switch oﬀ the other equipment as well before connecting it.
Only plug the device into the mains socket after you have connected the external devices and the antenna.
Make sure the power plug is freely accessible.
Caution:
If you want to use a wall bracket for your television, make sure
you read the assembly instructions for the wall bracket carefully
or have your specialist dealer mount it for you.

ENGLISH

When buying the wall bracket, make sure that all the fastening
points needed on the television are there on the wall bracket and
that they are all used when it is mounted.

GENERAL INFORMATION ---------------------------------------Special features of your television
Your television set enables you to receive and watch digital stations
(via DVB-T), including in High Deﬁnition (HD).
At present, reception for these digital television stations in High Deﬁnition is only possible in some countries in Europe.
This television can receive and process all analogue and all
unencrypted digital stations. This television set has an integrated
digital and analogue receiver. The digital receiver unit converts the
signals from digital stations to provide outstanding audio and picture
quality.
The TV guide (only for digital stations) tells you of any schedule
changes at short notice, and provides an overview of all the stations’
schedules for the next few days.
Detailed information on the individual stations – if it is provided by
the broadcaster – is also available in the electronic programme
guide.
You can connect various data media, for example, an external hard
drive, a USM memory stick or a digital camera to the USB socket.
Using the ﬁle browser, you can then select and play the ﬁle formats
you want (for example, MP4, MP3 or JPEG data).

Receiving digital stations
To receive digital stations you need a digital rooftop or indoor antenna (passive or active indoor antenna with its own power supply).
Unlike analogue broadcasting, not every station has its own transmission frequency. Instead, several stations are grouped into what
are known as bouquets on a regional or national level.
You can ﬁnd the current transmission information on teletext from various broadcasters, or look in a TV guide or on the Internet.

What is Common Interface?
Common Interface (CI) is an interface for DVB receivers.
Encoded stations can only be viewed with a CA module suitable for
the encoding system and the corresponding smart card.
The television set is equipped with a Common Interface slot into
which CA modules from various providers can be inserted.
You can insert the provider’s smart card into the CA module in order
to enable the encrypted stations you want to see.

CONNECTION/PREPARATION ---------------------Connecting the antenna and the mains cable

1 Plug the cable of the rooftop or indoor antenna (passive or
active indoor antenna with its own power supply for digital television stations) into the antenna socket »ANT IN« on the television set;
or
plug the rooftop antenna cable (for analogue television stations)
into the »ANT IN« socket on the television.
Note:
When connecting an indoor antenna you may have to try it out
at diﬀerent positions until you get the best reception.
Vision 37

2 Plug the mains cable supplied into the »AC IN« mains socket of
the television.
3 Plug the mains cable into the wall socket.
Note:
Only plug the device into the mains socket after you have
connected the external devices and the antenna.
Only connect the television using the power cord supplied to a
suitable earthed safety socket.
Do not use an adapter plug or extension lead which does not
meet the applicable safety standards. Do not tamper with the
power cord.
ENGLISH

Vision 42

CONNECTION/PREPARATION ---------------------Inserting batteries in the remote control
1 Open the battery compartment by removing the lid.
2 Insert the batteries (3 x 1.5 V micro for example R03 or AAA).
Observe the polarity (marked on the base of the battery compartment).
3 Close the battery compartment.
Note:
If the television no longer reacts properly to remote control
commands, the batteries may be ﬂat. Be sure to remove used
batteries.
The manufacturer accepts no liability for damage resulting from
used batteries.
Environmental note
Batteries, including those which contain no heavy metal, may not
be disposed of with household waste. Please dispose of used
batteries in an environmentally sound manner. Find out about the
legal regulations which apply in your area.

OVERVIEW ----------------------------------------------------------------------------------------------

USB

USB socket for external data media.

L R

Audio signal input for camcorder.

S-VHS

Video signal input for S-Video camcorder.

Video

Video signal input for camcorder.

Headphone connection (3.5 mm jack plug).

Common Interface slot.

HDMI3

HDMI socket, audio/video signal input (HDMI).

HDMI2

HDMI socket, audio/video signal input (HDMI).

HDMI1

HDMI socket, audio/video signal input (HDMI).

COMPONENT
INPUT
Y Pb Pr
AUDIO IN LR

Video signal input (YUV signal).
Audio signal input (YUV signal).

SPDIF OUT

Audio output sockets (coaxial) for PCM/AC3
signals. For connecting to a digital multi-channel
audio/video ampliﬁer or AV receiver.

PC-IN VGA

VGA socket, video signal input for PC.

PC AUDIO IN

Audio signal input for PC.

ANT IN

Antenna socket.

SCART

Euro/AV socket (FBAS signal, RGB signal).

AC IN

Socket for the mains cable.

ENGLISH

Connections on the television

OVERVIEW ---------------------------------------------------------------------------------------------Controls on the television

Note:
The sensor button »8« is always lit. The symbols of the other sensor buttons
light up brieﬂy if you brush your hand over the control panel. To operate,
brieﬂy tap the respective button symbol.
Adjust the volume;
select menu functions.

Opens the pre-selection for AV channels.
Press »Λ« or »V« in the menu,
conﬁrm with » « or » «.
Opens the main menu.
Select the menu item with »Λ« or »V«;
activate the function with » « or » «;
set the function with » « or » «;
switch oﬀ the menu with »M«.

Λ V

Switch on the television from standby;
select the station in steps;
select a function in the menu.

Switches the television on and back into standby mode.
The only way to disconnect the television from the mains is
to pull out the plug.

OVERVIEW ---------------------------------------------------------------------------------------------The remote control

Switches oﬀ the television set (stand-by).

1...0

Switches the television on from standby mode
Selects channels directly.

Opens the pre-selection for AV channels and the
USB input.
Then select with »V« or »Λ«.

Displays the number and name of a station;
reveals answers in teletext mode.

PIP

Updates the page in teletext mode.

Switches between picture formats.

Sound on/oﬀ (mute).

Opens the menu.

Zapping function;
switches the menus back one menu level.

Λ V

Switches the television on from standby;
selects stations step by step;
moves the cursor in the menus up and down.
Calls up the channel list;
activates various functions.

– +

Adjusts the volume;
moves the cursor left/right.

TXT

Switches between teletext and TV modes

TV-G

Opens the electronic TV guide.

Selects various picture settings;
selects a page in teletext mode.

¥
3
F

Displays the time;
selects a page in teletext mode.
Freeze-frame;
selects a page in teletext mode.
Selects diﬀerent sound settings (in analogue TV
operation);
selects diﬀerent languages (in digital TV operation);
selects desired topic in teletext mode.

ENGLISH

(OK)

OVERVIEW ---------------------------------------------------------------------------------------------SCAN

Enlarges the picture;
switches to double character size in teletext mode.

PAT

Selects the split screen function in teletext mode.

Selects diﬀerent subtitles (in digital TV operation);
selects subpages in teletext mode.

Selects channel lists (»All Channels«, »RADIO«,
»FAV1« to »FAV4«);
page hold in teletext mode.

Switches to operation of a GRUNDIG
digital receiver, GRUNDIG digital receiver with
hard disk (PDR), GRUNDIG DVD player,
GRUNDIG DVD recorder or GRUNDIG
AV receiver.
Press »M« until the »DR«, »DVD« or »AMP«
display lights up.
Then select the one you want.
If you do not press a button within 10 seconds,
the remote control returns to television mode
(»TV«).
Note:
»DR« has been programmed for operating a
GRUNDIG digital receiver (remote control
level 1).
»DVD« has been programmed for operating a
GRUNDIG DVD player.
»AMP« has been programmed for operating a
GRUNDIG AV receiver.
The functions available depend on the model of
the device you are using.
Just try it out.
You can change this programming:
Press and hold down »M« and press three
number buttons to enter the code:
»1«, »2«, »3« for a GRUNDIG DVD player.
»4«, »5«, »6« for a GRUNDIG DVD recorder.
»1«, »4«, »7« for a GRUNDIG digital receiver
(remote control level 1).
»2«, »5«, »8« for a GRUNDIG digital receiver
(remote control level 2).
»3«, »6«, »9« for a GRUNDIG digital receiver
with a hard disc (PDR).

SETTINGS ---------------------------------------------------------------------------------------------------Searching for television stations
The television has an automatic tuning function, which ﬁrst searches
for digital TV channels and then analogue ones.
You start the search and can then sort the television stations into your
order of preference.
There are 400 presets for digital channels and 99 for analogue
channels, to which you can assign TV stations from the antenna or
from the cable connection (analogue channels).
1 Press »8«, »1…0« or »V« or »Λ« to switch on the television from
standby mode.
– The »Installation Guide« menu appears when the device is ﬁrst
switched on.

Installation
Menüsprache

Deutsch

Aktivantenne

Aus
s

Programmsuchlauf

Auswählen

2 Press »– « or »+ « to select the language.

Ende

Help:
If the »Installation Guide« menu does not appear on the screen,
make the setting by following the instructions on returning the television to its factory condition on page 26.
Note
The antenna power supply may only be switched on if the antenna is actually an active indoor antenna with a signal ampliﬁer
and it is not already supplied with a voltage via a mains plug
(or similar supply).
Otherwise you may cause a short circuit and irreparably damage
your antenna.

Installation Guide
English

Active Antenna Power

Off

3 Select the »Active Antenna Power« with »V« or »Λ«.
Press »– « or »+ « to switch on the antenna voltage (»On«).

Auto Tuning

Select

Exit

4 Select »Auto Tuning« with »V« or »Λ« and conﬁrm with »G«.
– »Country Selection« is active.

Please select country and scan type, then press OK to start tuning
Country Selection

Deutschland

Scan Type

ATV & DTV

Time Zone

Berlin GMT+1

57 %
DTV
DTV
DTV
DTV
DTV

UHF

ZDF
ZDFinfokanal
SAT.1
N24
ProSieben
kabel eins

CH49

5 Press »– « or »+ « to select the country.
6 Select the »Scan Type« with »V« or »Λ«.
Press »– « or »+ « to select whether you want to search for only
digital television stations (DTV), only analogue television stations
(ATV) or both (ATV & DTV).
7 Select »Time zone« with »V« or »Λ«.
Press »– « or »+ « to select time zone.

Searching...
GGGGGGGGGGGGGGGG

DTV

8 Press »G« to start the search.
– The »Searching...« menu appears, and the search for TV
stations begins. This may take several minutes depending on
the number of television stations received.
– The search is ended when the »Programme Table« appears.

Skip
Exit

Note:
The search can be ended prematurely with »i«.

ENGLISH

Language Settings

SETTINGS ---------------------------------------------------------------------------------------------------Changing stored channels for digital stations
You can change the order of the channels found as required, delete
channels you do not need and block access to certain presets
(parental control).
Press »F « (blue) to switch between »Programme Table – ALL TYPE«,
»Programme Table – DTV«, »Programme Table – RADIO« and »Programme Table – ATV«.
Press »z « (red) to display the channels assigned to a network.
Press »P« to switch the channel list to the next page, press »S« to
switch it back to the previous page.

Opening the channel list
1 Open the menu with »i«.
– The »PICTURE« menu is displayed.

CHANNEL SETUP
s

Digital Manual Tuning

2 Select the »CHANNEL SETUP« menu with »– « or »+ «.

Auto Tuning

Analogue Manual Tuning

3 Select »Programme Table« with »V« or »Λ« and conﬁrm
with »G«.
– The »Programme Table« menu is displayed.

Programme Table
Signal Information
CA - Module

Not Inserted

Active Antenna Power

On
Z

Back

Select
Exit

Moving channels to diﬀerent presets
1 In the »Programme Table« menu, press »V« or »Λ« to select the channel to be moved.

Programme Table
Service Type
ALL TYPE
Network
All Networks
CHANNEL SETUP
CA FAV1 FAV2 FAV3 FAV4
DTV

1 Das Erste

DTV

2 ZDF

DTV

3 RTL Television

DTV

4 SAT.1

DTV

5 ProSieben

DTV

6 VOX

DTV

7 RTL2

DTV

8 kabel eins

DTV

9 Super RTL

2 Press »¥ « (green) to highlight the channel.

3 Enter the new presets with one, two or three digits using
»1…0«.
New position

4 Press »G« to conﬁrm the entry.
Notes:
To sort the other television channels, repeat steps 1 to 4.

0 - 9 New position

Select

Z Back

Exit

Stations that are assigned to ﬁxed preset numbers (such as
French stations with LCN coding) cannot be moved.

SETTINGS ---------------------------------------------------------------------------------------------------Creating a list of favourites
You can select your favourite channels and save them in up to
four lists (FAV1 to FAV4).

Programme Table
Service Type
ALL TYPE
Network
All Networks
CHANNEL SETUP
CA FAV1 FAV2 FAV3 FAV4
DTV

Das Erste

DTV

2 ZDF

DTV

3 SAT 1

DTV

4 ProSieben

DTV

5 3sat

DTV

6 kabel eins

DTV

7 WDR 3

DTV

8 N24

DTV

9 Doku

Select

1 In the »Programme Table« menu, select the television
channel with »V« or »Λ«.
2 “Push” the television channel with »–« or »+« into the
favourites list 1 to 4 and save it with »G«.
– The position in the favourites list is marked with »«.
– You can enter the same channel in more than one
favourites list.

Network

Move

Delete

Service Type

Z Back

Exit

S Prev. Page P Next Page

Note:
You can delete channels from the favourites list. Press »V«
oder »Λ« and »– « or »+« to select the channel and »G«
to delete it.

Deleting channels
Programme Table
Service Type
ALL TYPE
Network
All Networks
CHANNEL SETUP
CA FAV1 FAV2 FAV3 FAV4
DTV

1 Das Erste

DTV

2 ZDF

DTV

3 SAT 1

DTV

4 ProSieben

DTV

5 3sat

DTV

6 kabel eins

DTV

7 WDR 3

DTV

8 N24

DTV

9 Doku

Select

1 In the »Programme Table« menu, press »V« or »Λ« to
select the channel to be deleted and press »3« (yellow) to
conﬁrm.
2 Press »¥ « (green) to conﬁrm the deletion.

Notes:
Press »z « (red) to delete all the channels.
Presets whose channels have been deleted are no longer
shown in the »Programme Table«.
Network

Move

Delete

Service Type

Z Back

Exit

S Prev. Page P Next Page

Skipping television stations
Programme Table
Service Type
ALL TYPE
Network
All Networks
CHANNEL SETUP
CA FAV1 FAV2 FAV3 FAV4

1 Das Erste

DTV

2 ZDF

DTV

3 SAT 1

DTV

4 ProSieben

DTV

5 3sat

DTV

6 kabel eins

DTV

7 WDR 3

DTV

8 N24

DTV

9 Doku

Select

1 In the »Programme Table« menu, select the television channel with »V« or »Λ«.
2 Press »+« to switch to the »-« symbol and press »G« to
highlight the television channel.
– The channel is marked with »-«.

Network

Move

Delete

Service Type

S Prev. Page P Next Page

Z Back

Exit

Note:
Channels can be enabled again. Press »V« or »Λ« to
select the channel, press »+« to switch to the symbol »-«
and press »G« to enable the channel again.

Ending the settings
1 Press »i« to ﬁnish the settings.

ENGLISH

DTV

You can highlight television stations to be skipped when you select with »V« or »Λ«. It is still possible to select using the number buttons.

SETTINGS ---------------------------------------------------------------------------------------------------Picture settings
1 Open the menu with »i«.
– The »PICTURE« menu is displayed.
PICTURE
Vivid

Picture Mode
Brightness

GGGGGGGG

Contrast

GGGGGGGGGGGGGG

Colour

GGGGGGGGGG

Sharpness

GGGGGGGGG

Colour Temperature

Medium

2 Select »Picture Mode«, »Brightness«, »Contrast«, »Colour«,
»Sharpness« or »Colour Temperature« with »V« or »Λ«.
Select the value with »– « or »+ « and conﬁrm with »G«.
Notes:
Other settings can be found on the second page of the
»PICTURE« menu.
3 Switch to the second menu page with »V« and conﬁrm
»Advanced Picture Settings« with »G«.

Back

Select
Exit

4 Select »DNR«, »Mpeg NR«, »Vibrant colour«, »Perfect Clear«,
»Dynamic Contrast«, »Dynamic Backlight« or »Backlight« with
»V« or »Λ«.
Select the value with »– « or »+ « and conﬁrm with »G«.

PICTURE
Auto

Mpeg NR

Off

Vibrant Colour

Off

Perfect Clear

Off

Dynamic Contrast

Off

Dynamic Backlight

Off

Backlight

GGGGGGGGGGGGGGGGG

Back

Select

DNR

100

Notes:
You can only select the »Mpeg NR« function on digital and AV
presets.
»Mpeg NR« reduces any interference from artefacts (pixel
blocks) from digital stations with MPEG compression (such as
from DVB-T receivers or DVD players).

Exit

»Dynamic Contrast« the contrast adjusts according to the picture
content to ensure optimum contrast.
»Dynamic Backlight« backlighting adjusts according to the picture content to ensure optimum contrast.
You can only change the backlighting if the »Dynamic Backlight«
function is switched oﬀ.
5 Press »i« to end the setting.

SETTINGS ---------------------------------------------------------------------------------------------------Audio settings
1 Open the menu with »i«.
– The »PICTURE« menu is displayed.

SOUND
GGGG

Balance

GGGGGGGGGGGGGGGGGG

AVL

Off

Sound Type

Stereo

Sound Mode

Normal

Volume

Equalizer
Headphone

GGG

s
Z

2 Select the »SOUND« menu with »– « or »+ « and conﬁrm with
»G«.
Note:
Additional operations are explained in the following sections.

Volume

Back

Select

1 Select »Volume« with »V« or »Λ« and adjust the setting with
»– « or »+«.

Exit

Balance
1 Select »Balance« with »V« or »Λ« and adjust the setting with
»– « or »+«.

Automatic volume

SOUND
GGGG

Balance

GGGGGGGGGGGGGGGGGG

AVL

Off

Sound Type

Stereo

Sound Mode

Normal

Volume

Equalizer
Headphone

GGG

s
Z

Back

Select
Exit

The television channels broadcast at diﬀerent volumes. The automatic
volume limiting (AVL) function means the volume is kept the same
when you switch between channels.
1 Select »AVL« with »V« or »Λ« and then select »On« with »– « or
»+«.
Note:
If the »SRS« setting has been selected in the »Sound Mode« line,
the AVL line cannot be selected.

Stereo / two channel, mono

Balance

GGGGGGGGGGGGGGGGGG

AVL

29
Off

Sound Type

Stereo

Sound Mode

Normal

GGGG

Equalizer
Headphone

GGG

s
Z

Back

Select
Exit

1 Select »Sound Type« with »V« or »Λ« and adjust the setting with
»– « or »+«.

Stereo width
Widens the audio output for stereo programmes and improves the
sound with mono reception.
1 Select »Sound Mode« with »V« or »Λ«.
2 Press »– « or »+« to select the setting »Spatial«.

ENGLISH

SOUND
Volume

If the device receives two channel programmes, e.g. a ﬁlm with the
original sound on sound channel B (display: »Dual II«) and the
dubbed version on sound channel A (display: »Dual I«), you can
select the sound channel you desire.
If the device receives stereo or Nicam programmes, it switches
automatically to stereo sound (display: »Stereo«).
You can switch the sound to »Mono« if the stereo reception
quality is poor.

SETTINGS ---------------------------------------------------------------------------------------------------SRS TruSurround XT*

SOUND
GGGG

Balance

GGGGGGGGGGGGGGGGGG

AVL

Off

Sound Type

Stereo

Sound Mode

Normal

Volume

Equalizer
Headphone

GGG

s
Z

Exit

GGGGGGGGGGGGGGGGGG

Off

Sound Type

Stereo

Sound Mode

Normal

Balance

1 Select »Equalizer« with »V« or »Λ« and conﬁrm with »G«.
– The »EQUALIZER« menu appears.

AVL

Equalizer
Headphone

GGG

21
s
Z

2 Select the setting »SRS« with »– « or »+«.
The equaliser oﬀers you four preset sound settings (Music, Sports,
Movie and Speech) and one which you can create yourself (User).

SOUND
GGGG

1 Select the »Sound Mode« line with »V« or »Λ«.

Equaliser

Back

Select

Volume

SRS TruSurround XT is a patented audio technology, which is integrated in the television set and only requires the built-in speakers to
produce a Surround Sound eﬀect.

Back

Select
Exit

Note:
If the »SRS« setting has been selected in the »Sound Mode« line,
the »Equalizer« line cannot be selected.
2 Select the audio setting »User« with »– « or »+« and conﬁrm with
»V«.
– The frequency band »120 Hz« is activated.
3 Set the desired value with »V« or »Λ« and select the next
frequency band with »– « or »+«.
4 Press »Z« to save the setting.

Audio description (audio subtitles)
Audio description is an additional audio channel for people who
are visually impaired. The activities, surroundings, scene changes or
the appearance, the gestures and facial expressions of the actors
are described.
This sound is transmitted at the same time as the normal sound with
digital television stations. This depends on the programme being
broadcast.

SOUND

Volume

1 Select »o« with »V« or »Λ«.

Off

Audio Description

GGG

Back

Select
Exit

2 Select »Audio Description« with »V« or »Λ« and press »G« to
conﬁrm.
3 Select »On« with »– « or »+ «.
4 Select the »Volume« with »V« or »Λ« and adjust with »– « or
»+ «.

* Under licence from SRS Labs, Inc.
TruSurround XT, SRS and the
symbol are trademarks of SRS Labs, Inc.

SETTINGS ---------------------------------------------------------------------------------------------------TruBass and Dialog Clarity
The »TruBass« setting gives you an increased bass eﬀect.
»Dialog Clarity« recognises dialogue sections in audio recordings
and improves dialogue reproduction.
The two functions can be found on the second page of the
»SOUND« menu.

Dialog Clarity

Off

TruBass

Back

Select
Exit

Note:
The »SRS« setting must be selected in the »Sound Mode« line.
1 Select »TruBass« or »Dialog Clarity« with »V« or »Λ«.
2 Select the setting with »– « or »+ «.
3 Press »Z« to end the setting.

Concluding the settings
1 Press »i« to ﬁnish the settings.

ENGLISH

SOUND
Audio Description

TELEVISION OPERATION -----------------------------------------Basic functions
Switching on and oﬀ

1 Press »8«, »1…0« or »V« or »Λ« to switch on the device from
standby mode.
2 Press the »8« button to switch the television to standby mode.

Selecting channels
1 Use »1…0« to select channels directly.
2 Press »V« or »Λ« to move up and down channels.
3 Open the channel list by pressing »G«, select the station with »V«
or »Λ« and press »G« to switch oﬀ the channel list.

Selecting stations from lists
You can select stations from various lists, (e.g. All Channels, FAV1).
1 Press »P« to call up the overview of channel lists.
– The overview is displayed.
2 Press »V« or »Λ« to select the channel list and »G« to conﬁrm.
3 Press »V« or »Λ« to select the channel and »G« to conﬁrm.

Selecting AV channels
1 Call up the »INPUT SOURCE« menu with »AV«.
2 Select the desired AV channel position with »V« or »Λ« and
press »G« to conﬁrm.
3 Switch back to the television channel with »1…0«.

Switching between digital and analogue channels
1 Open the »INPUT SOURCE« menu by pressing »AV«.
2 Press »V« or »Λ« to select »DTV« (digital presets) or »ATV«
(analogue presets) and press »G« to conﬁrm.

Adjusting the volume
1 Adjust the volume with »– « or »+«.

Muting
1 Use »p« to switch the sound oﬀ (mute) and to switch it on again.

Displaying time
1 You can display the time by pressing the »

¥ « button.

TELEVISION OPERATION -----------------------------------------Displaying information
1 Press »?« to display the information.
– The display disappears automatically after a short while.

Freeze-frame
If you wish to view a particular scene for longer, you can freeze the
frame of the current programme.
1 Press »3« (yellow).

2 To quit this function, press »3« again.

Picture settings
You can select diﬀerent picture settings.
1 Select the desired picture setting from »User«, »Sports«, »Movie«,
»Natural« or »Vivid« with »z «.
– You can alter the »User« picture setting, see the ”Picture
settings” chapter on page 16.

Sound settings
You can select various audio settings when watching analogue
channels.
1 Select »User«, »Speech«, »Movie«, »Sports«, »Music« or by
pressing »F « (blue).
– You can modify the »User« audio setting – see the “Equaliser”
chapter on page 18.

Audio language
You can select various languages when watching digital channels.
This depends on the programme being broadcast.
1 Press »F « (blue) to open the selection menu.
2 Select your language using »V« or »Λ« and press »G« to
conﬁrm.

Subtitles
You can select various subtitles when watching digital channels.
This depends on the programme being broadcast.
1 Open the selection menu with »S«.
2 Select your language using »V« or »Λ« and press »G« to
conﬁrm.

With this function, you can enlarge the picture on the television or
computer.
1 Activate the zoom function by pressing and holding down
»SCAN«.

ENGLISH

Zoom function

TELEVISION OPERATION -----------------------------------------Zap function
This function allows you to save the television channel which you are
currently watching and switch to other channels (zapping).
1 Select the channel you want to save in the zap memory with
»1…0« or »Λ« »V«, (e.g. channel 1, BBC 1) and save by pressing »Z«.
2 Change channels with »1…0« or »Λ« »V«.
3 You can now use »Z« to switch between the saved channel (in the
example, BBC1) and the channel you were watching before.
4 Press »i« to quit the zap function.
– The display disappears.

Electronic TV guide
The electronic program guide oﬀers an overview of all programmes
that will be broadcast in the next week (for digital stations only).
1 Press »TV-G« to see programme information.
Notes:
Not all stations supply provide a detailed TV guide.
Many broadcasters supply the daily programme but no detailed
descriptions.
There are broadcasters which do not provide any information at
all.
2 Select the television station with »V« or »Λ«.
– The programmes being shown on the selected television
channel for today are displayed.
In addition, information about the programme currently being
transmitted is displayed with detailed information.
3 Press »+ « to switch to today’s programme.
Note:
You can open and switch oﬀ extensive programme information
with »?«.
4 Press »V« to select information on the next programme and, »Λ«
to return to the information for the current programme.

5 Press »¥ « (green) to select the next days, and »z « (red) to
return to today.
6 Switch back to the station selection by pressing »– «.
Note:
Press »F « (blue) and »G« to transfer the selected programme into
the memory timer.
7 Press »i« to quit the electronic programme guide.

TELEVISION OPERATION -----------------------------------------Changing the picture format
The television automatically switches to the 16:9 format if this
format is detected via the Euro-AV socket.
1 Select the picture format with »E «. The selected picture
format, for example »16:9«, appears on the screen.
– You can choose between the following picture formats:

»AUTOMATIC« format
The picture format is automatically switched to »16:9« for 16:9
programmes.
The picture format is automatically switched to »4:3« for 4:3
programmes.

»16:9« and »14:9« formats
During programmes in 4:3 format, the picture is stretched horizontally if »16:9« or »14:9« is selected.
The picture geometry is stretched horizontally.
With actual 16:9 signal sources (from a set-top box on the Euro-AV
socket) the picture ﬁlls the screen completely and with the correct
geometry.

»4:3« format
The picture is shown in 4:3 format.

»LetterBox« format
The letterbox setting is especially suitable for programmes in 16:9
format.
The black borders which are usually at the top and bottom of the
screen are eliminated, 4:3 pictures ﬁll the screen.
The transmitted pictures are enlarged, but are slightly cropped at the
top and bottom. The picture geometry remains unchanged.

»Subtitle« format
If you cannot read the subtitles which appear on the bottom of the
screen, then select »Subtitle«.

»Panorama« format

ENGLISH

This setting is suited to ﬁlms with a large width/height ratio.
During programmes in 4:3 format the picture is stretched horizontally if the »Panorama« function is selected. The picture geometry is
stretched horizontally.

TELETEXT MODE ---------------------------------------------------------------------------TOP text or FLOF text mode
1 Press »TXT« to switch to teletext mode.
2 You can directly select teletext pages with »1...0«.
To return to page 100, press »i«.
Note:
At the bottom of the screen, you will see an information line consisting of a red, green and, depending on the station, yellow and
blue text ﬁeld. Your remote control has buttons with the corresponding colours.
3 Press »z « (red) to scroll back a page.

¥ « (green) to scroll to the next page.

4 Press »

5 Press »3« (yellow) to select chapters.
6 Press »F « (blue) to select topics.

7 Press »TXT« to switch oﬀ teletext mode.

Normal text mode
1 Press »TXT« to switch to teletext mode.
2 You can directly select teletext pages with »1...0«.
To return to page 100, press »i«.
3 Press »V« to scroll back a page.
4 Press »Λ« to scroll to the next page.
5 Press »TXT« to switch oﬀ teletext mode.

Additional functions
Skipping the waiting time
While a page is being searched for, you can switch to the television
channel.
1 Enter the teletext page number using »1…0« and then press
»PIP«.
– As soon as the page is found, the page number is displayed.
2 Press »PIP« to switch to the teletext page.

Increasing character size
If you have diﬃculty reading the text on the screen, you can double
the character size.
1 To enlarge the character size of a teletext page, press »SCAN«
repeatedly.

TELETEXT MODE ---------------------------------------------------------------------------Page stop
A multiple page may contain several sub-pages, which are automatically scrolled by the transmitting station.
1 Stop the sub-pages with »P«.
2 Press »P« to quit the function.

Calling up a sub-page directly
If the selected teletext page contains further pages, the number
of the current sub-page as well as the total number of pages is
displayed.
1 Call up the sub-pages with »S«.
2 Press »1…0« to enter the sub-menu.
3 Press »S« to quit the function.

Reveal answer
Certain teletext pages contain ”hidden answers” or information
which can be called up.
1 Display information with »?«.
2 Conceal information with »?«.

Split screen (Split Screen)
With this function you can see the television channel on the left and
the teletext page on the right.
1 To activate the split screen function, press »PAT«.
– The television channel and the teletext page appear next to
each other on the screen.

ENGLISH

2 To deactivate the split screen function, press »PAT«.

CONVENIENCE FUNCTIONS -----------------------------Convenience functions
1 Open the menu with »i«.
– The »PICTURE« menu is displayed.

OPTIONS
s

Language Settings
Deutschland

Game Mode

Off

Restore Factory Defaults
Country

Software Update
SPDIF Output

PCM
Z

Back

2 Select »OPTIONS« with »– « or »+ « and press »G« to conﬁrm.
Note:
Additional operations are explained in the following sections.

Changing the menu language
1 Select »Language Settings« with »V« oder »Λ« and press »G«
to conﬁrm.

Select
Exit

2 Select »Language Settings« with »V« oder »Λ.
3 Select the language with »– « or »+«.
4 Press »i« to ﬁnish the setting.

Language settings
(only for digital television channels)
You can alter the appearance of subtitles or disable them, select the
subtitle language, select a second subtitle language, and select the
audio language and a second audio language.
1 Select »Language Settings« with »V« or »Λ« and press »G« to
conﬁrm.

Language Settings

English

Audio Languages

English

Subtitle Languages

English

Hard of Hearing

OPTIONS

Off

2 Select »Audio Languages«, »Subtitle Languages«, »Hard of Hearing«) with »V« or »Λ« and press »G« to conﬁrm.
3 Select »Primary« or »Secondary« with »V« or »Λ« and press
»G« to conﬁrm.
4 Press »– « or »+ « to make the setting.

Back

Select
Exit

5 Select »Close« with »V« or »Λ« and press »G« to conﬁrm.
6 Press »i« to end the setting.

Resetting the television to its original state
This function enables you to delete the station lists and all custom
settings.

OPTIONS
s

Language Settings
Country

Deutschland

Game Mode

Off

Software Update
SPDIF Output

PCM
Z

1 Select »Restore Factory Defaults« with »V« oder »Λ« and press
»G« to conﬁrm.
2 Select the »Yes « button with »– « or »+ « and conﬁrm the reset
function with »G«.
– The »Installation Guide« menu is displayed.

Back

Select
Exit

Restore Factory Defaults

3 Continue the settings as described in the chapter on searching
for television stations on page 13.

CONVENIENCE FUNCTIONS -----------------------------Game mode
This function is only available for preset channels »HDMI1«,
»HDMI2«, »HDMI3«, »YPBPR« or »PC«.
OPTIONS
s

Language Settings
Deutschland

Game Mode

Off

Restore Factory Defaults
Country

Software Update
SPDIF Output

PCM
Z

Use this function to adjust the screen settings of the television set for
games. Connect the games console using the »HDMI1«, »HDMI2«,
»HDMI3«, »COMPONENT INPUT VIDEO IN Y Pb Pr« or
»PC-IN VGA« sockets.
You can no longer make settings in the »PICTURE« menu.
1 Select »Game Mode« with »V« or »Λ«
2 Press »– « or »+ « to switch the function on or oﬀ.

Back

Select
Exit

3 Press »i« to end the setting.

Selecting the audio signal for digital output
OPTIONS
s

Language Settings
Deutschland

Game Mode

Off

Software Update
SPDIF Output

Restore Factory Defaults
Country

PCM
Z

Here you select whether the audio signal is emitted from the »SPDIF
OUT« socket in PCM data format or in AC3 format.
1 Select »SPDIF Output« by pressing »V« or »Λ«.
2 Select the signal type (»PCM« or »Dolby* D«) by pressing »– «
or »+ «.
3 Quit the setting by pressing »i«.

Back

Select
Exit

Parental control
1 Open the menu with »i«.
– The »PICTURE« menu is displayed.

PARENTAL CONTROL
Lock System

Off

Set PIN

Block Programme
Parental Guidance
Panel Lock

4
Off

Back

2 Select the »PARENTAL CONTROL« menu with »– « or »+ « and
press »G« to conﬁrm.
3 Enter the PIN code »0000« with »1 ... 0«.
Note:
Additional operations are explained in the following sections.

Select
Exit

Lock the system
Using this function, you can lock the television menus so that they
can only be accessed by entering a PIN code.

Lock System

Off

Set PIN

Block Programme
Parental Guidance
Panel Lock

4
Off

1 Select »Lock System« with »V« or »Λ«.
2 Activate the lock with »–« or »+«.
3 Press »i« to end the setting.
ENGLISH

PARENTAL CONTROL

Back

Select
Exit

* “Dolby”and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license from Dolby Laboratories.

CONVENIENCE FUNCTIONS -----------------------------Changing the PIN code
Instead of the default code »0000«, you can enter a personal code.

PARENTAL CONTROL
Lock System

Off

Set PIN

Block Programme
Parental Guidance
Panel Lock

4
Off

Back

Select
Exit

Please take note of your personal code.
1 Select »Set PIN« with »V« or »Λ« and press »G« to conﬁrm.
2 Enter your new personal PIN code with »1 ... 0« in four digits.
3 Enter your personal PIN code again with »1 ... 0« and press
»G« to conﬁrm.
4 Press »i« to end the setting.

Block a television channel
You can block individual television channels which are not suitable
for children using a personal PIN code.
PARENTAL CONTROL
Lock System

Off

Set PIN

Block Programme
Parental Guidance
Panel Lock

4
Off

1 Select »Block Programme« with »V« or »Λ« and press »G« to
conﬁrm.
– The channel list is displayed.
2 Select the television channel in the »Programme Table« with »V«
or »Λ« and press »¥ « (green) to conﬁrm.
– The »D« symbol is displayed in front of the channel in the Programme Table.

Back

Select

3 Press »i« to end the setting.

Exit

Note:
Press »V« or »Λ« to release the channel and switch oﬀ the block
by pressing »¥ « (green).

Authorise channels
There are movies which contain contents or scenes which are not
suitable for children.

PARENTAL CONTROL
Lock System

Off

Set PIN

Block Programme
Parental Guidance
Panel Lock

4
Off

Certain programmes contain information which identiﬁes these
contents or scenes and have been given an access level from 4 to
18. You can select one of the access levels and thus authorise the
playback.
1 Select »Parental Guidance« with »V« or »Λ«.

Back

Select

2 Select the access level with »–« or »+«.

Exit

3 Press »i« to end the setting.
PARENTAL CONTROL
Lock System

Blocking the control panel (parental control)

Off

Set PIN

Block Programme
Parental Guidance
Panel Lock

4
Off

Back

Select
Exit

If the control panel block is activated, the buttons on the television do
not work.
1 Select »Panel Lock« with »V« or »Λ«.
2 Activate (On) or deactivate (Oﬀ) the panel block with »–« or
»+«.
3 Press »i« to end the setting.

CONVENIENCE FUNCTIONS -----------------------------Timer functions
1 Open the menu with »i«.
– The »PICTURE« menu is displayed.

TIMER
19 /Jun 2008 14:35

Off Time

Off
Off

Sleep Timer

Off

Auto Sleep

Off

Time Zone

Berlin GMT+1

Clock
On Time

2 Select the »TIMER« menu with »– « or »+ « and press »G« to
conﬁrm.
Notes:
The correct time is shown in »Clock«.
Additional operations are explained in the following sections.

Back

Select
Exit

Switch-oﬀ timer
In the »Oﬀ Time« menu, you can enter a switch-oﬀ time for the television. The television switches oﬀ after the entered time has elapsed
in stand-by.
TIMER

1 Select »Oﬀ Time« with »V« or »Λ« and press »G« to conﬁrm.

19 /Jun 2008 14:35

Off Time

Off

On Time

Off

Sleep Timer

Off

Auto Sleep

Off

Time Zone

Berlin GMT+1

Clock

Back

Select
Exit

2 Select »Repeat« with »V« or »Λ« and select the mode with »– «
or »+ «.
3 Select »Hour« with »V« or »Λ« and enter the time with »1…0«.
4 Select »Minute« with »V« or »Λ« and enter the time with
»1…0«.
5 Select »Close« with »V« or »Λ« and press »G« to conﬁrm.
6 Press »i« to end the setting.

Switch-on timer
In the »On Time« menu, you can enter a switch-on time for the television.
The television switches on with the preset volume and the desired
channel after the set time in stand-by mode has elapsed.
1 Select »On Time« with »V« or »Λ« and press »G« to conﬁrm.

Off Time

Off

On Time

Off

Sleep Timer

Off

Auto Sleep

Off

Time Zone

Berlin GMT+1

Back

Select
Exit

19 /Jun 2008 14:35

2 Select »Activate« with »V« or »Λ« and press »– « or »+ « to
choose when the television should switch on.
3 Select »Hour« with »V« or »Λ« and enter the time with »1…0«.
4 Select »Minute« with »V« or »Λ« and enter the time with
»1…0«.
5 Select »Volume« with »V« or »Λ« and set the volume by pressing
»– « or »+ «.
6 Select »Mode« with »V« or »Λ« and press »– « or »+ « to select
»DTV« or »ATV«. This entry is only possible if you have already
entered a switch-on time.

8 Select »Close« with »V« or »Λ« and press »G« to conﬁrm.

ENGLISH

TIMER
Clock

9 Press »i« to end the setting.

7 Select »Program« with »V« or »Λ« and enter the television
channel by pressing »– « or »+ «.

CONVENIENCE FUNCTIONS -----------------------------Enter the switch-oﬀ time (Sleep Timer)
TIMER
19 /Jun 2008 14:35

Off Time

Off

On Time

Off

Sleep Timer

Off

Auto Sleep

Off

Time Zone

Berlin GMT+1

Clock

Back

Select
Exit

In the »Sleep Timer« menu you can enter a time for the television to
switch oﬀ. After this time has elapsed, the television switches to
standby mode.
1 Select »Sleep Timer« with »V« or »Λ«.
2 Select the switch-oﬀ time with »– « or »+ «.
Note:
Switch oﬀ the function by pressing »– « or »+ « to set it to »Oﬀ«.
3 Press »i« to end the setting.

Automatic switch-oﬀ (Auto Timer)
If this function is activated, the television switches oﬀ after 5 minutes
on stand-by if no video signal is transmitted.

TIMER
19 /Jun 2008 14:35

Off Time

Off
Off

Sleep Timer

Off

Auto Sleep

Off

Time Zone

Berlin GMT+1

Clock
On Time

Back

1 Select »Auto Sleep« with »V« or »Λ«.
2 Press »– « or »+ « to switch the function »On«.
Note:
Switch oﬀ the function by pressing »– « or »+ « to set it to »Oﬀ«.
3 Press »i« to end the setting.

Select
Exit

Setting the time zone
TIMER
19 /Jun 2008 14:35

Off Time

Off

On Time

Off

Sleep Timer

Off

Auto Sleep

Off

Time Zone

Berlin GMT+1

Back

Select
Exit

Clock

The television automatically detects the local diﬀerence to Greenwich Mean Time (the selected channel provides a time signal). You
can set the local time diﬀerence yourself if the time is not detected or
is not the same as your local time.
1 Select »Time Zone« with »V« or »Λ«
2 Set the time zone with »–« or »+« (in Germany: + 1.00 hour).
3 Press »i« to end the setting.

USB-MODE ---------------------------------------------------------------------------------------------The ﬁle formats
Your television can be operated via the USB input with the following
ﬁle formats:

MP4 video data
The MP4 process was designed to compress video ﬁles.
An MP4 video is an encoder/decoder, based on the MPEG-4 compression system, which is used to decrypt and display compressed
video data.
This enables the televsion to play back videos compressed in the
MPEG 4 SP format.
MPEG 4 SP ﬁles are “packaged” with the audio data – which have
been compressed using MP3, AAC or Dolby Digital© – in this “.AVI”
or “.MP4” ﬁle.

MP3/WMA audio data
MP3 stands for MPEG-1 Audio Layer 3 and comes from the Motion
Picture Expert Group (MPEG) standard, which was developed for
compressing audio and video data.
WMA is a compression standard for audio data (Windows Media
Audio).
These formats enable audio ﬁles to be saved on a computer with a
sound quality similar to that of a CD.
MP3 ﬁles can be organised into folders and subfolders similar to
ﬁles on a computer.

JPEG picture data

ENGLISH

JPEG stands for Joint Picture Experts Group. This process was designed to compress picture ﬁles.
JPEG ﬁles can be saved onto a data medium along with other ﬁle
types.
The ﬁles can be compiled in folders. This structure is similar to that of
an MP3 CD.

USB-MODE ---------------------------------------------------------------------------------------------Connecting external data media
Before connecting the data medium, switch the television to stand-by
with »8«. Connect the device and then switch the television on again.
Before connecting the data medium, the television must ﬁrst be
switched to standby, otherwise ﬁles can be damaged.

1 Connect the USB interface »USB« of the television and the
corresponding socket on the data device (external hard drive,
digital camera, card reader or MP3 player) using a USB cable;
or
plug the memory stick into the USB interface »USB« of the television.
Note:
A bi-directional data transfer as deﬁned for ITE (Information
Technology Equipment) devices in EN 55022/EN 55024 is not
possible.
USB transfer is not in itself an operating mode. It is only an additional function.

USB-MODE ---------------------------------------------------------------------------------------------The ﬁle browser
The ﬁle browser displays the data (AVI., JPEG, MP3, MP4 or WMA
data) that the external data medium oﬀers.
If a data medium contains diﬀerent ﬁle formats, you can deactivate
data you do not need for the playback using a ﬁlter function (All
Supported, Text, Movie, Music, Photo).

The main menu of the ﬁle browser
1
All Supported

16GB/20GB Free

4
5

PMP
C:\

Bilder
Musik 1

Musik 2
Filme
Menu

1/1

Back

1 Selected data format.
2 Name of the data medium.
3 Total folders on the data medium.
4 Total memory and available memory of external data medium.
5 Inset picture of a selected JPEG picture.
6 Status information for the selected ﬁle.

ENGLISH

7 Menu navigation.

USB-MODE ---------------------------------------------------------------------------------------------Settings in the USB setup menu
Opening the USB setup menu
1 Open the menu with »i«.
– The »PICTURE« menu is displayed.
2 Select the »USB SETUP« menu with »– « or »+ «.
Note:
Additional operations are explained in the following sections.

Switching on automatic preview
If the automatic preview is switched on, you can see the selected
JPEG picture in the main menu of the ﬁle browser.

USB SETUP
Slide Show Interval
View Mode

Off

Auto Preview

5s
Original

Back

1 Select »Auto Preview« with »V« or »Λ«
2 Press »– « or »+ « to switch on the (on) function.
3 Press »i« to end the setting.

Selecting the display duration of the slideshow

Select
Exit

1 Select »Slide Show Interval« with »V« or »Λ«.
2 Select the time (3, 5, 10 seconds) with »– « or »+ «.
3 Press »i« to end the setting.

Selecting the display mode
1 Select »View Mode« with »V« or »Λ«.
2 Press »– « or »+ « to select the function.
3 Press »i« to end the setting.

Playback – Basic functions
1 Press »AV« to select data medium, press »V« or »Λ« to select
»USB« and press »G« to conﬁrm.
– The ﬁle browser (the “Contents”) of the data medium is displayed.
2 Select ﬁle format (All Supported, Text, Movie, Music, Photo) with
»– « or »+«.
3 Switch to the ﬁle overview with »G«.
4 Select the ﬁle you want with »V« or »Λ« and press »G« to
conﬁrm.
– A list of sub-directories appears.
Note:
Switch back to the main folder with »Z«.

USB-MODE ---------------------------------------------------------------------------------------------5 Select the track or picture with »V« or »Λ« and start play by
pressing » «.
– You can view information on the ﬁlm by pressing »z « (red).
– For playing MP3 or WMA data, information on the album,
track and singer is displayed at the right of the menu.
– When playing picture data, information about the resolution
and the size is displayed at the right of the menu.
Note:
The ﬁle browser is switched oﬀ when playing picture data. Press
»7« to switch back to the ﬁle browser.
6 Press »!« to pause playback.
7 Press »

« to resume normal playback.

8 Press »7« to end playback.
– The ﬁle browser appears.
Note:
To return to the main folder, press »Λ« to select the folder icon
»
..« and then press »G«.

Additional playback functions
Depending on the ﬁle formats used, the following additional
functions are possible.
If the »-« symbol appears on the television screen, then the selected
function is not possible with this ﬁle.

Play selected tracks
Only play the marked tracks.
1 Select the track with »V« or »Λ« and highlight using »G«.
2 Select the next track with »V« or »Λ« and highlight with »G«.
3 Start playback with »

«.

4 Press »7« to end playback.
Note:
To remove the highlighting, select the track with »V« or »Λ« and
switch oﬀ the marking with »G«.

Selecting a track or picture in steps (SKIP)
1 During playback, select the next track/picture you want with
»6«.

ENGLISH

2 Select the previous track/picture with »5«.
– Playback begins with the track or picture you selected.

USB-MODE ---------------------------------------------------------------------------------------------Forward search (only MP4 video ﬁles)
You can select diﬀerent speeds (2-fold, 4-fold, 8-fold and 16-fold
forwards and backwards).
1 Select the playback speed during playback by pressing »m« or
»,«.
2 Press »

« to resume playback.

Enlarge/reduce picture
(only JPEG/MP4 video ﬁles)
This function allows you to enlarge or reduce various picture sections.
1 Press »G« during pause or playback.

Turn the picture display
(only JPEG ﬁles)
The pictures can be rotated by 90°.
1 During playback, press »– « or »+ « to rotate the pictures by 90°.

Repeat functions
Options:
–»
«, the selected track is repeated once;
–»
«, all tracks are played repeatedly.
1 Before playback, select the repeat function with »PIP«.
2 Start playback with »

«.

3 Deactivate the repeat function with »PIP«.
– The display changes to »
«.

USING EXTERNAL DEVICES ---------------------------------DVD player, DVD recorder, video recorder or
set-top box
Note:
Which television socket(s) you connect your external devices to
depends on the sockets the external device is equipped with and
the signals which are available.
Note that with many external devices the resolution of the video
signal must be adapted to the input sockets on the television
(check the external device’s instruction manual). You can ﬁnd out
which values you need to set by referring to the guidelines in the
section about connection options.
Note:
Do not connect any other equipment while the device is switched
on. Switch oﬀ the other equipment as well before connecting it.
Only plug the device into the mains socket after you have
connected the external devices.

High deﬁnition – HD ready
Your television can playback high-deﬁnition television signals
(HDTV).
You can connect the input sources (HDTV set-top box or High
Deﬁnition DVD player) to the »HDMI« socket (digital HDTV signal).
This ensures that you can view digital HDTV programmes, even if
they are copy-protected (HDCP High Bandwidth Digital Content Protection).

Connecting a DVD player, DVD recorder,
video recorder or set-top box
With a digital audio/video signal
Video signal: digital video; resolution: standard 576p; HDTV 720p,
1080i, 1080p.
Audio signal: digital audio (stereo, multi-channel compression,
uncompressed).
Channel position »HDMI1«, »HDMI2« or »HDMI3«.

ENGLISH

1 Connect the »HDMI1«, »HDMI2« or »HDMI3« socket on the
television and the corresponding HDMI socket on the external
device using a standard HDMI cable (digital video and audio
signal).

USING EXTERNAL DEVICES ---------------------------------With an analogue video signal (progressive)
Video signal: YUV; resolution: standard 576p; HDTV 720p, 1080i.
Audio signal: stereo, analogue.
Channel position »YPBPR«.
1 Connect the »COMPONENT INPUT Y Pb Pr« sockets on the
television and the corresponding sockets on the external device
using cinch cables (video signal).
2 Connect the »COMPONENT INPUT AUDIO IN L R« sockets
on the television to the corresponding sockets on the external
device using cinch cables (audio signal).

Using the Euro/AV socket
Video signal: FBAS/RGB.
Audio signal: stereo, analogue.
Channel position »SCART«.
1 Connect the »SCART« socket on the television and the corresponding socket on the external device using a EURO-AV cable
(video and audio signal).

With S-Video signal
Video signal: Y/C.
Audio signal: stereo, analogue.
Channel position »S-Video«.
1 Connect the »S-VHS« socket on the television and the corresponding socket on the external device using an S-Video cable
(video signal).
2 Connect the »L R« sockets on the television to the corresponding
sockets on the external device using cinch cables (audio signal).

With an analog TV signal
Video signal: FBAS.
Audio signal: stereo, analogue.
Channel position »AV«.
1 Connect the »Video« cinch socket on the television and the
corresponding socket on the external device using cinch cables
(video signal).
2 Connect the »L R« sockets on the television to the corresponding
sockets on the external device using cinch cables (audio signal).

USING EXTERNAL DEVICES ---------------------------------Using a video recorder, DVD player or
set-top box
1 Switch on the video recorder, DVD player or set-top box and select the function you wish to use.
2 Press »AV«, select the input signal channel with »Λ« or
»V« (»SCART«, »AV«, »S-Video«, »HDMI1«, »HDMI2«,
»HDMI3« or »YPBPR«) and press »G« to conﬁrm.

Headphones
Connecting the headphones
1 Plug the headphone jack (3.5 mm ø jack plug) into the headphone socket on the right side of the television.

Selecting audio settings for the headphones
1 Open the menu with »i«.
– The »PICTURE« menu is displayed.
2 Select the »SOUND« menu with »– « or »+ « and conﬁrm with
»G«.
3 Select the »Headphone« with »V« or »Λ«.
4 Adjust the volume with »– « or »+ «.

SOUND
GGGG

Balance

GGGGGGGGGGGGGGGGGG

AVL

29
Off

Sound Type

Stereo

Sound Mode

Normal

Volume

5 Press »i« to end the setting.

Equalizer
Headphone

GGG

s
Z

Back

Select

ENGLISH

Exit

USING EXTERNAL DEVICES ---------------------------------Decoder or satellite receiver
In order for the television to receive encoded programs from a
privately operated station, a decoder is needed.

Connecting a decoder or satellite receiver

Decoder

1 Connect the »SCART« socket on the television set and the appropriate socket on the decoder using a EURO-AV cable.

Using a decoder or satellite receiver
1 Switch on the television and the decoder or the satellite receiver.
2 Press »AV«, select the channel »SCART« with »V« or »Λ« and
press »G« to conﬁrm.

Activating the preset for a decoder
If this function is activated, the decoder (connected to the »SCART«
socket) provides a decoded audio/video signal.
OPTIONS
s

Language Settings
Deutschland

Game Mode

Off

Decoder Settings

Off

SPDIF Output

PCM
Z

Back

Select
Exit

Restore Factory Defaults
Country

1 Open the menu with »i«.
– The »PICTURE« menu is displayed.
2 Select »OPTIONS« with »– « or »+ « and press »G« to conﬁrm.
3 Select the »Decoder Settings« with »V« or »Λ«.
4 Press »– « or »+ « to switch the function (»On«).
5 Press »i« to end the setting.

USING EXTERNAL DEVICES ---------------------------------Camcorder
Connecting the camcorder
1 Connect the yellow socket »Video« on the television and the
corresponding socket on the camcorder (VHS, Video 8) with a
cinch cable (picture signal);
or
connect the »S-VHS« socket (picture signal) on the television and
the corresponding socket on the camcorder (S-VHS, Hi 8) with a
S-Video cable.
2 Connect the white and red sockets »L R« on the television and the
corresponding sockets on the camcorder with a cinch cable
(audio signal).
Note:
There must not be video signals at »Video« and »S-VHS«
sockets at the same time. This could lead to picture disturbances.

Operating with a camcorder
1 Switch on the camcorder, insert a cassette and start playback.
2 Press »AV«, select the »AV« or »S-Video« channel with »V« or
»Λ« and press »G« to conﬁrm.

Hi-ﬁ system/AV receiver
Connecting the hi-ﬁ system/AV receiver

ENGLISH

1 Connect the socket »SPDIF OUT« on the television to the corresponding socket on the AV receiver using a cinch cable (digital
audio signal).

PC MONITOR MODE ---------------------------------------------------------Connecting a PC

1 Connect the socket »PC-IN VGA« on the television to the corresponding socket on the PC using a VGA cable.
2 Connect the socket »PC AUDIO IN« on the television to the
corresponding socket on the PC using a cinch cable (audio
signal).
Note:
Adjust your PC to the monitor (for example, picture resolution
1280 x 768, picture frequency 60 Hz).

Selecting the channel position for the PC
1 Press »AV«, select the »PC« channel with »V« or »Λ« and press
»G« to conﬁrm.

Settings for the PC
1 Open the menu with »i«.
– The »PICTURE« menu is displayed.
2 Select the »PC SETUP« menu with »– « or »+ « and conﬁrm with
»G«.
PC SETUP

Auto Adjust
Horizontal Position

GGGGGGGG

Vertical Position

GGGGGGGG

Size

GGGGGGGGGG

Phase

GGGGGGGGG

Back

Select
Exit

3 Select the function or setting you want with »V« or »Λ« and press
»– « or »+« to execute it.
– Options:
»Auto Adjust«
For automatic PC conﬁguration;
»Horizontal Position« Adjust the picture position horizontally;
»Vertical Position«
Adjust the picture position vertically;
»Size«
Set the cycle frequency;
»Phase«
Remove horizontal ﬂicker, blurring
and horizontal lines.
4 Press »i« to ﬁnish the settings.

OPERATION WITH COMMON INTERFACE
Inserting the CA module

Note:
Switch oﬀ the appliance before inserting the CA module in the
»CI« slot.
1 Insert the smart card into the CA module.
2 Insert the CA module with the smart card into the »CI« slot on the
television.
Note:
To see which CA module is in the Common Interface slot, go to
the »CA - Module« submenu.

Access control for CA module and smart card
1 Open the menu with »i«.
– The »PICTURE« menu is displayed.
s

Digital Manual Tuning

s
s

Analogue Manual Tuning

Programme Table
Signal Information
CA - Module
Active Antenna Power

Auto Tuning

IRDETO ACCESS
On
Z

Back

Select
Exit

2 Select the »CHANNEL SETUP« menu with »– « or »+ « and conﬁrm with »G«.
3 Select »CA–Module« with »V« or »Λ« and press »G« to
conﬁrm.
Notes:
This menu give operating instructions and – after you enter your
PIN code – access to channels of the PAY-TV provider.
The remaining settings are described in the manuals for your CA
module and smart card.
4 Press »i« to ﬁnish the settings.

ENGLISH

CHANNEL SETUP

SPECIAL SETTINGS -----------------------------------------------------------------Tuning digital television stations
This search deletes all television stations included in the channel list!

Tuning all digital television stations using the
search
1 Open the menu with »i«.
– The »PICTURE« menu appears.

CHANNEL SETUP
s

Digital Manual Tuning

s
s

Analogue Manual Tuning

Programme Table
Signal Information
CA - Module

Not Inserted

Active Antenna Power

On
Z

Back

Select
Exit

Searching...
GGGGGGGGGGGGGGGG

57 %
DTV
DTV
DTV
DTV
DTV
DTV

UHF

CH49

DTV

ZDF
ZDFinfokanal
SAT.1
N24
ProSieben
kabel eins

Auto Tuning

2 Select the »CHANNEL SETUP« menu with »– « or »+ «.
3 Select »Auto Tuning« with »V« or »Λ« and conﬁrm with »G«.
4 Select »Country Selection« by pressing »V« or »Λ« and press
»– « or »+ « to make the setting.
5 Select the »Scan Type« with »V«.
Press »– « or »+ « to select the »DTV« display and start the search
with »G«.
– The »Searching...« menu appears, and the search for digital
TV stations begins. This may take several minutes depending
on the number of television stations received.
– The search is ended when the »Programme Table« appears.
Note:
You can stop the search by pressing »i«.
6 Press »i« to end the setting.

Skip
Exit

Tuning the digital television stations by entering
the channel numbers
1 Open the menu with »i«.
– The »PICTURE« menu appears.
Digital Manual Tuning
UHF CH

Frequency
Poor

578 MHz
Normal

Good

GGGGGGGGGGGGGGGG

0 –

Select

Back
Exit

2 Select the »CHANNEL SETUP« menu with »– « or »+ «.
3 Select »Digital Manual Tuning« with »V« or »Λ« and press »G«
to conﬁrm.
– The »Digital Manual Tuning« menu appears.
4 Enter channel number directlywith »1 ... 0« and press »G« to
conﬁrm.
– The search is ﬁnished when the channels found appear in the
list.
5 Press »i« to end the setting.

SPECIAL SETTINGS -----------------------------------------------------------------Tuning analogue television stations
This setting is only necessary if you cannot receive any digital stations
and you have not carried out an analogue search during initial setup.
The television station can be set directly or using the search.

Switching the television to analogue channels
1 Open the »INPUT SOURCE« menu by pressing »AV«.
2 Select input source »ATV« with »V« or »Λ« and press »G« to
conﬁrm.
Note:
Additional operations are explained in the following sections.

Re-tuning all analogue television channels
These settings are only necessary if you can not receive any digital
stations or if you want to re-tune all analogue channels.
The analogue television stations are listed in the channel list after the
digital television stations.
Note:
Plug the rooftop antenna cable (for analogue television stations)
into the »ANT IN« socket on the television.
1 Open the menu with »i«.
– The »PICTURE« menu appears.

CHANNEL SETUP
s

Digital Manual Tuning

s
s

Analogue Manual Tuning

Programme Table
Signal Information
CA - Module

Not Inserted

Active Antenna Power

On
Z

Back

Select
Exit

Searching...
GGGGGGGGGGGGGGGG

14%...
ATV
ATV
ATV

1 ARD
2 ZDF
3 BR3
4 3 SAT

Skip

161.25 MHz

ATV

2 Select the »CHANNEL SETUP« menu with »– « or »+ «.
3 Select »Auto Tuning« with »V« or »Λ« and conﬁrm with »G«.
4 Select »Country Selection« by pressing »V« or »Λ« and press
»– « or »+ « to make the setting.
5 Select the »Scan Type« with »V«.
Press »– « or »+ « to select the »ATV« display and start the search
with »G«.
– The »Searching...« menu appears, and the search for analogue
TV stations begins. This may take several minutes depending
on the number of television stations received.
– The search is ended when the »Programme Table« appears.
Note:
You can stop the search by pressing »i«.
6 Press »i« to end the setting.

Exit

ENGLISH

ATV

Auto Tuning

SPECIAL SETTINGS -----------------------------------------------------------------Tuning the analogue television channels by
entering the channel numbers
Analogue Manual Tuning
System

Current Channel

S 21

Fine Tuning

a s

Programme No

2 Select the »CHANNEL SETUP« menu with »– « or »+ «.
+ 00

Skip

1 Open the menu with »i«.
– The »PICTURE« menu appears.
3 Select »Analogue Manual Tuning« with »V« or »Λ« and press
»G« to conﬁrm.

Yes

Frequency

443.25 MHz
Save

Select

4 Select the »Programme No« by pressing »V« or »Λ« and press
»– « or »+ « to set the preset.

Back

5 Select »Current Channel« with »V« or »Λ«.

Exit

6 Press »G« to choose between »S« (special channel) or »C«
(channel).
Analogue Manual Tuning
System

Current Channel

S 21

Fine Tuning

a s

Programme No

+ 00

Skip

Yes

Frequency

443.25 MHz
Save

Select

Back
Exit

7 Enter the channel number with »– « or »+ « step by step or with
»1…0« directly.
Note:
The current system is displayed in the »System« line. If the colour
and/or sound is not functioning correctly, select »System« with
»V« or »Λ«.
Select the necessary settings with »– « or »+ «.
8 Press »z « (red) to ﬁnish the setting.
Note:
To set other television stations, repeat steps 4 to 8.
9 Press »i« to end the setting.

Fine tuning analogue television stations
The television automatically tunes itself to the best possible reception. You may need to ﬁne tune it manually in areas where the reception is poor.

Analogue Manual Tuning
System

2 Open the menu with »i«.
– The »PICTURE« menu appears.

Current Channel

S 21

Fine Tuning

a s

Programme No

+ 00

Skip

Yes

Frequency

443.25 MHz
Save

Select

Back
Exit

1 Select stations with »1 ... 0« directly or step by step with »V« or
»Λ«.

3 Select the »CHANNEL SETUP« menu with »– « or »+ «.
4 Select »Analogue Manual Tuning« with »V« or »Λ« and press
»G« to conﬁrm.
5 Select »Fine Tuning« with »V« or »Λ« and set with »– « or »+ «.
6 Press »z « (red) to ﬁnish the setting.
7 Press »i« to end the setting.

SPECIAL SETTINGS -----------------------------------------------------------------Changing stored channels for analogue stations
If channels were stored with the automatic channel search during
the tuning of the television channels, you can delete them. You can
also store stations in a diﬀerent preset, change or enter the name of
a stations as well as skip channels.

Select channel lists
1 Open the menu with »i«.
– The »PICTURE« menu is displayed.

CHANNEL SETUP
s

Digital Manual Tuning

s
s

Analogue Manual Tuning

Not Inserted
On
Z

Back

Select
Exit

3 Select »Programme Table« with »V« or »Λ« and press »G« to
conﬁrm.
Note:
Additional operations are explained in the following sections.

Deleting channels
1 In the »Programme Table« menu, press »V« or »Λ« to select the
channel to be deleted and press »3« (yellow) to conﬁrm.
2 Press »¥ « (green) to conﬁrm the deletion.

Note:
Press »z « (red) to delete all the channels.

Sorting television channels
1 In the »Programme Table« menu, select the channel to be moved
with with »V«, »Λ«, »– « or »+«.
2 Highlight the channel with »¥ « (green).

3 Select a new channel position by pressing »Λ«, »V«, »– « or
»+« and then press »G« to conﬁrm.
– All of the channels that follow move up one position.
Note:
To sort the other television channels repeat steps 1 to 3.

Entering the channel names
(maximum of 5 characters)
1 In the »Programme Table« menu, select the desired channel with
»Λ«, »V«, »– « or »+«.
2 Highlight the channel with »z « (red).
3 Select letters or numbers with »Λ« or »V«, move to the next
position with »– « or »+« and repeat.
4 Store the channel name with »G«.
Note:
To enter additional channel names, repeat steps 1 to 4.

ENGLISH

Signal Information
Active Antenna Power

2 Select the »CHANNEL SETUP« menu with »– « or »+ « and conﬁrm with »G«.

Programme Table
CA - Module

Auto Tuning

SPECIAL SETTINGS -----------------------------------------------------------------Skipping television channels
You can highlight television stations to be skipped when you select
with »Λ« or »V«. It is still possible to select using the number buttons.
1 In the »Programme Table« menu, select the desired channel with
»Λ«, »V«, »– « or »+«.
2 Press »+« to switch to the »-« symbol and press »G« to highlight
the television channel.
– The channel is marked with »-«.
Note:
Channels can be enabled again. Press »V« or »Λ« to select the
channel, press »+« to switch to the symbol »-« and press »G«
to enable the channel again.

Creating a list of favourites
You can select your favourite channels and save them in up to four
lists (FAV1 to FAV4).
1 In the »Programme Table« menu, select the television
channel with »V« or »Λ«.
2 “Push” the television channel with »–« or »+« into the favourites
list 1 to 4 and save it with »G«.
– The position in the favourites list is marked with »«.
– You can enter the same channel in more than one favourites
list.
Note:
You can delete channels from the favourites list. Press »V« oder
»Λ« and »– « or »+« to select the channel and »G« to delete it.

Concluding the settings
1 Press »i« to ﬁnish the settings.

INFORMATION -----------------------------------------------------------------------------Displaying signal information
(only for digital television channels)
1 Open the menu with »i«.
– The »PICTURE« menu appears.

CHANNEL SETUP
s

Digital Manual Tuning

Auto Tuning

Analogue Manual Tuning

Programme Table
Signal Information
CA - Module

Not Inserted

Active Antenna Power

On
Z

2 Select the menu »CHANNEL SETUP« with »– « or »+«.
3 Select »Signal Information« with »V« or »Λ« and press »G« to
conﬁrm.
– You will see information on the channel, modulation, quality
and signal strength.

Back

Select

Notes:
The lower section of the menu shows the signal properties. The
further the bar for »Quality« and »Signal Strength« extends to
the right, the better the reception signal.

Exit

The signal level not only depends on your receiver system, but
also on the channel which is currently active. Remember this when
aligning your antenna using the signal level display.
4 Press »i« to end the display.

Updating software
(only for digital television channels)
1 Open the menu with »i«.
– The »PICTURE« menu appears.

OPTIONS
s

Language Settings
Deutschland
Off

Software Update
SPDIF Output

PCM
Z

Back

Select

2 Select the »OPTIONS« menu with »– « or »+ «.
3 Select the »Software Update« menu by pressing »V« or »Λ«.
4 Press »G« to start the software update.
– The software is updated automatically, if possible.
5 Press »i« to end the setting.

Exit

ENGLISH

Game Mode

Restore Factory Defaults
Country

INFORMATION -----------------------------------------------------------------------------Dismantling the stand of the unit
If you want to attach your television to the wall with a wall bracket,
you need to dismantle the stand.
1 Place the television carefully front down on a table on top of a
suitable base, such as foam.
2 Unscrew the four screws (A).

3 Remove the stand (B).
4 Attach the cover (C) provided and fasten with two screws.

B
C

Caution:
Follow the assembly instructions for the wall bracket carefully or
have a specialist assemble it for you.
When purchasing the wall bracket, make sure that all the fastening points (D) on the television are also on the wall bracket and
that they are all used when mounting it.

INFORMATION -----------------------------------------------------------------------------Technical data
Operating voltage:

230V, 50 Hz

Power consumption:

in operation 170 W (Vision 37)
in operation 210 W (Vision 42)
in standby < 1.2 W

Sound output:

2 x 20 watts music (2 x 10 sine wave)

Reception ranges:

Analogue: C01 ... C80,
special channels
S01 ... S41
Digital:

VHF/UHF
Bandwidth 7 MHz and 8 MHz
COFDM modes: 2k and 8k
Constellation: 16QAM,
64QAM, QPSK

Preset channels:

400 (digital), 99 (analogue) and
8 AV, 1 USB

Screen size:

94 cm/37“ (Vision 37)
107 cm/42“ (Vision 42)

Max. resolution:

WUXGA 1920 x 1080

Weight:

approx 18.5 kg (Vision 37)
approx 23.2 kg (Vision 42)

Service information for dealers
The television set may only be operated with the mains adapter supplied.
The product complies with the following EU directives:
2006/95/EG directive for electrical equipment to be used within
deﬁned voltage ranges. 2004/108/EG directive on electromagnetic compatibility.
The device complies with the following standards: EN 60065,
EN 55013, EN 55020, EN 55022, EN 55024.

Environmental note
Therefore, do not throw the product away with normal household
waste at the end of its life. Take it to a collection point for recycling
electrical and electronic devices. This is indicated by this symbol on
the product, in the operating manual and on the packaging.
Please ﬁnd out about collection points operated by your local
authority.
Help protect the environment by recycling used products.

Technical changes and errors reserved.

ENGLISH

This product has been made from high-quality parts and materials
which can be re-used and recycled.

INFORMATION -----------------------------------------------------------------------------Troubleshooting
If the remedies given below do not work, please consult an authorised GRUNDIG dealer. Please bear in mind that malfunctions can
also be caused by external devices such as video recorders or satellite receivers.
Fault
Screen lit (snow), but no station

Poor picture contrast

Interference to picture and/or
sound
Ghosts, reﬂection

Possible cause
Antenna cable
No television station programmed
Picture settings incorrectly set
Problem at station
Interference from other devices
Channel setting
Antenna

No colour

Picture but no sound
Teletext missing or faulty

Remote control does not work

Colour intensity at minimum
TV standard setting (if setting
option is available)
Problem at station
Volume set to minimum
Problem at station
Television station (has no teletext) or antenna system
Station signal too weak
No optical connection
Remote control batteries
Operating condition undeﬁned

Picture is dark in PC mode

Incorrect setting for picure resolution and picture frequency on
the PC

Remedy
Is the antenna cable connected?
Start the station search
Adjust the brightness, contrast
or colour setting
Test with another channel
Change the position of the
device
Automatic or manual channel
setting/ﬁne tuning
Have antenna cable or system
checked
Turn up the colour
Select the correct colour standard
Test with another channel
Turn up or switch on the volume
Test with another channel
Test another channel for ﬁne
tuning and ghosts
Check the antenna system
Point the remote control at the
television set
Check the batteries, change if
necessary
Switch oﬀ the television with the
main power button for approximately 2 minutes
Change the setting on the PC
(for example, picture resolution
1280 x 768, picture frequency
60Hz)

NOTE:
This is a Class A product. During operation the device can cause
radio interference. In this case the user may have to remedy this.
Please contact your specialist dealer.

INFORMATION -----------------------------------------------------------------------------Additional Information for units sold in the UK.
Units sold in the UK are suitable for operation from a 240V ac, 50Hz
mains supply.
The range of multi-system receivers is built to work in most European
countries. However, the mains plug and socket system for the UK diﬀers
from many European countries.
This appliance has been supplied with a ﬁtted, non-removable, approved
converter plug for use in the UK. This converter plug is ﬁtted with a 5A
rated fuse.
In case this appliance is supplied with a moulded 2-pin Euro plug only,
which is unsuitable for UK operation, this must be cut oﬀ and immediately
disposed of. An approved 13A, 3-pin UK plug should then be ﬁtted by a
qualiﬁed electrician.
Note:
The severed Euro plug must be destroyed to avoid a possible
shock hazard should it be inserted into a socket elsewhere.
If a non-rewireable 3-pin plug or a rewireable 13A (BS1363) 3-pin plug
is used, it must be ﬁtted with a 5A ASTA or BSI approved BS1362 fuse. If
any other type of plug is used it must be protected by a 5A fuse either in
the plug, or at the distribution board. If this type of plug becomes defective, ensure that the fuse is removed before disposal, to eliminate potential shock hazard.
If it is necessary to change the fuse in the non-rewireable plug, the correct type and rating (5A ASTA or BSI approved BS1362) must be used
and the fuse cover must be reﬁtted. If the fuse cover is lost or damaged,
the lead and plug must not be used until a replacement is obtained. Replacement fuse covers should be obtained from your dealer.
Important:
The wires in the mains lead are colour coded in accordance with the following code:
BLUE – NEUTRAL
BROWN – LIVE
As the colours of the wires in the mains lead of your appliance may not
correspond with the coloured marking identifying terminals in your plug,
proceed as follows:

ENGLISH

Connect the BLUE coloured wire to plug terminal marked with the letter
“N” or coloured black.
Connect the BROWN coloured wire to the plug terminal marked with the
letter “L” or coloured red.
In no circumstance must any of the wires be connected to the terminal
marked with the letter “E”, earth symbol “V”, coloured green, or green &
yellow.

Grundig Multimedia B.V.
Atrium, Strawinskylaan 3105 • NL-1077 ZX Amsterdam • http://www.grundig.com
09/14

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-21:37:19
Create Date                     : 2009:05:07 08:36:10+02:00
Modify Date                     : 2009:05:07 08:45:06+02:00
Creator Tool                    : QuarkXPress 7.5
Metadata Date                   : 2009:05:07 08:45:06+02:00
Producer                        : Acrobat Distiller 9.0.0 (Macintosh)
Format                          : application/pdf
Creator                         : ullrich
Title                           : 02Vision 7 37_42-7952_en:Layout 1
Document ID                     : uuid:e53ce479-d2e5-0248-9275-32925c5b3953
Instance ID                     : uuid:79249b51-022e-b84a-a260-d678574904d3
Page Layout                     : SinglePage
Page Mode                       : UseThumbs
Page Count                      : 54
Author                          : ullrich

EXIF Metadata provided by EXIF.tools

Grundig Color Television Vision 7 37 7952 T Users Manual 02Vision 37_42 7952_en

VISION 7 37-7952 T to the manual 0b338569-3156-452e-9c14-3dbf7f06841d

Navigation menu

Versions of this User Manual:

Views

Navigation