Grundig Pro Ceramic Hair Clipper Set Mc 6540 Users Manual 2 6540.ENG

MC 6540 to the manual ccb33ba4-7061-4c79-8b81-ae4344a28569

: Grundig Grundig-Grundig-Pro-Ceramic-Hair-Clipper-Set-Mc-6540-Users-Manual-430080 grundig-grundig-pro-ceramic-hair-clipper-set-mc-6540-users-manual-430080 grundig pdf

Open the PDF directly: View PDF .
Page Count: 16

Download
Open PDF In Browser	View PDF

ǵ

PRO CERAMIC
HAIR CLIPPER
SET

MC 6540

_________________________________________________________

2

_________________________________________________________

D

F

C
G

A

H

B
E

I

3

_________________________________________________________

4

_________________________________________________________

DEUTSCH

6 - 15

ENGLISH

16 - 25

POLSKI

26 - 35

5

SAFETY _______________________________________________
Please note the following
information when using the
appliance:
7

7

7

The appliance is designed for
domestic use only.
Observe these instructions in
order to prevent damage to the
appliance or danger arising from
improper use. Keep them in a
safe place.
Never use the appliance in the
bath, shower or over a washbasin filled with water; nor
should it be operated with wet
hands.

7

7
7

7

7

7

7

7

Do not immerse the appliance in
water or let it come into contact
with water, even during cleaning.
Do not drop the appliance.

16 ENGLISH

Do not use the appliance near
water in bathtubs, wash basins or
other vessels.
Pull out the mains plug after use.
If the appliance is used in the
bathroom, it is essential that the
mains adapter is pulled out after
use, as water close to the
appliance can still constitute a
danger, even if it is switched off.
Never use the appliance if it is
visibly damaged.
Keep the appliance away from
children.
Do not open the appliance under
any circumstances. No warranty
claims are accepted for damage
resulting from improper handling.

OVERVIEW__________________________________________
Fold out page 2 so that you have
the illustrations in front of you.

Controls

Accessories

A

On/off switch.

F

B

LED, lights red when the
appliance is connected to the
mains.

Combs of various sizes for
different trimming grades
(#1 to #7).

G

Lever for moving the lower
blade.

Two combs for side-on fine
trimming (right and left).

H

Comb for short hair and
graduation (blending).

I

Mains adapter.

C

D

Cutting head.

E

Socket for mains adapter lead.

Other accessories
1 x Scissors.
1 x Face/neck cleaning brush.
3 x Hair clips.
1 x Appliance cleaning brush.
1 x Oil for cutting head.

ENGLISH 17

POWER SUPPLY ___________________________________
Operation with
rechargeable batteries
When using the built-in rechargeable nickel metal hydride batteries,
use the mains adapter supplied as a
charger.
1 Plug the mains adapter into the
E socket, and plug the mains
adapter into the mains socket.
Notes
7 Completely charge up the batteries (16 hours) before you first use
them or if you have not used
them for a long time.
7

7

When switched off the charging
time is approximately 8 hours. If
you switch on the appliance while
it is charging, charging will stop.
The ambient temperature should
be between 5 °C and 40 °C.

18 ENGLISH

7

When fully charged, the
appliance works for around
45 minutes. It is not advisable to
charge the batteries after every
use, especially if you do not use
the appliance for the full 45 minutes. Only charge the batteries
when they are completely
discharged. This increases their
life. Do not charge them every
day.

Environmental note
7 This appliance contains nickel
metal hydride batteries. Do not
dispose of it with your household
waste at the end of its service life.
Open the housing. Remove the
batteries and take them to a battery collection box in a shop or
public collection point.

POWER SUPPLY ___________________________________
Mains operation
(with mains adapter)
Check that the voltage on the mains
adapter type plate corresponds to
your local mains supply. The only
way to disconnect the device from
the mains supply is to unplug the
adapter.
1 Insert the mains adapter plug in
the E socket.
2 Insert the mains adapter plug in
the socket.
– The built-in batteries are
switched off.
Note
7 Only use the appliance in battery
mode when in the bathroom or
beside a water connection; never
run it from the mains.

ENGLISH 19

OPERATION ________________________________________
Special features
The appliance has a ceramic/stainless steel cutting head D . You can
adjust the steel blade while
trimming using the lever C . This
allows you to finely adjust the trimming length.

Trimming hair
1 Put on a comb for the cutting
grade you need (see the table
below).

2

1

2 To do this, put the teeth of the
cutting head in the central grove
of the comb and gently press on
the bottom of the blade head
until it catches (1 and 2).
3 Place a towel around the neck
and shoulder of the person
whose hair you are trimming.
Make sure the person is seated
so that their head is roughly at
your eye level. Before trimming,
comb the hair so that it falls naturally and you can see the direction in which it grows.
4 Switch on the appliance using
the switch A and start
trimming.
5 Turn off the appliance using
the A switch when you have
finished trimming.
6 Take off the comb. Gently pull
the bottom catch away from the
cutting head until it comes loose.
Then lift off the comb.

20 ENGLISH

OPERATION ________________________________________
Using the lever

C

You can continuously adjust the
lever while trimming. This adjusts
the trimming length without you
having to attach a comb.
When the lever is at the top, the
cutting length is shortest. The further
you push down the lever, the
greater the cutting length.
With the lever right down, the
cutting length is the same as with a
3 mm comb attachment.
Using the lever extends the life of
the blades, because the cutting
angle changes with each adjustment.
If the blades are blocked by very
thick hair, you can unblock them by
moving the lever without having to
remove the lower steel blade.

When you have finished trimming,
clean the blades of hair clippings
by quickly moving the lever from
maximum to minimum with the
appliance still on.

Comb attachment grades
Comb #1
Comb #2
Comb #3
Comb #4
Comb #5
Comb #6
Comb #7

3 mm
6 mm
9 mm
12 mm
16 mm
20 mm
25 mm

Note
7 All the lengths here are approximate.

ENGLISH 21

OPERATION ________________________________________
Useful tips
7

7

7

7

7

7

7

Hold the appliance with a
relaxed and comfortable grip.
Always cut against the natural
direction of the hair.
As you cut, take a break at regular intervals. You can always
make a correction, but not once
the hair has been cut.
Only cut a small amount the first
time you use the trimmer. This is
the only way to get used to the
variable grades.

Environmental note
This product has been made from
high-quality parts and materials
which can be re-used and recycled.
Therefore, do not throw the product
away with normal household waste
at the end of its life. Take it to a collection point for recycling electrical
and electronic devices. This is indicated by this symbol on the product,
in the operating manual and on the
packaging.

Do not force the comb through
the hair. Let it guide you.
Keep combing the hair. Only look
for hair which is too long and
comb out clippings.
To ensure good results, the hair
should be dry.

22 ENGLISH

Please find out about collection
points operated by your local
authority.
Help protect the environment by
recycling used products.

CLEANING AND CARE ___________________________
Cleaning and care

Adjusting the blades

1 Switch off the appliance and
unplug it if you are running it
from the mains.

When new, the blades are optimally
aligned. However, you need to
readjust the blades if you replace
them or if you have removed the
lower blade for cleaning.

2 Take off the comb and clean the
blades with the brush supplied.
3 Only clean the housing and the
comb with a damp, soft cloth.
Note
7 Never immerse the appliance,
lead or mains adapter in water
or other liquids.
4 Before using the appliance
again, dry all parts completely
using a towel.

1 Loosen the screws.
2 Align the teeth of upper blade
(ceramic) and the lower blade
(stainless steel). The points of the
teeth on the upper blade should
be roughly 1.2 mm behind those
of the lower blade.

5 Do not use cleaning agents.

3 If the blades are not correctly
aligned, switch off the
appliance, loosen the screws
again and readjust the blades.

6 Put on the protective cover supplied.

4 Tighten the screws once you
have aligned the blades.

Note
7 Remove any clippings after each
use.

ENGLISH 23

CLEANING AND CARE ___________________________
Storage
Note
7 Normally you do not need to oil
the blades, because they are
made of two different materials
(ceramic and steel). If you want to
maintain the original condition of
the blades for as long as
possible, it is worth oiling the cutting head at regular intervals.

If you do not want to use the appliance for a long period of time,
please store it carefully.
1 Ensure that it is unplugged and
is completely dry.
2 Store the parts in the original
packaging in a cool, dry place.
To prevent damage to the cutting
head, put on the protective cover
supplied.
3 Make sure the appliance is kept
out of reach of children.

24 ENGLISH

INFORMATION ____________________________________
This product fulfils the
European directives
89/336/EEC and
73/23/EEC.

Technical data

Ni-MH

Power supply
Batteries: Nickel metal hydride
Mains adapter

Guarantee
The guarantee does not cover the
cutting head or defects which do
not significantly impair the value or
function of the appliance. The
guarantee is invalidated if the
appliance is damaged, opened or
improperly used.

Technical and design modifications reserved.

ENGLISH 25

Grundig Multimedia B.V.
Atrium, Strawinskylaan 3105 • NL-1077 ZX Amsterdam • http://www.grundig.com



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2006:04:05 11:25:36
Producer                        : Acrobat Distiller 4.0 for Macintosh
Creator                         : QuarkXPress Passportª 4.11: LaserWriter 8 D2-8.7.1
Author                          : Ullrich
Title                           : 2 MC 6540.ENG
Modify Date                     : 2006:04:05 11:31:46+02:00
Page Count                      : 16
Page Mode                       : UseThumbs

EXIF Metadata provided by EXIF.tools