GuangZhou Walkera Technology DEVO-7E 2.4GHz Transceiver User Manual Manual of DEVO 7E 1 9
GuangZhou Walkera Technology Co., Ltd 2.4GHz Transceiver Manual of DEVO 7E 1 9
Contents
Users Manual Part 2of8
Contents Part one: General information 1.0 General information ................ 2 1.1 Important statements ------------- 2 1.2 Safely needing attention ----------- 2 1.3 Attention before flight .............. 2 2.0 Features ---------------------------- 3 2.1 Transmitter DEVO 7E ------------- 3 2.2 Features of DEVOVRX701 --------- 3 3.0 Specification ----------------------- 3 3.1 DEVO 7E transmitter .............. 3 specification 3.2 Receiver specification ............. 3 4.0 Detinition of DEVO 7E -------------- 4 4.1 Panel definition ------------------- 4 4.2 Rear definition -------------------- 4 4.3 Wiring Diagram ................... 5 4.4 Function keys in panel ............. 5 5.0 Control Stick Adjustment ........... 5 6.!) Neck Strap Usage .................. 6 7.0 Stick Mode Switch ------------------ 5 8.0 Switches between left-hand and right-hand throttles ------------- 7 8.1 Right-hand throttle SWitched -------- 7 to leftrharid throttle 8.2 Left-hand throttle switched ......... g to right-hand throttle 9.0 Training function ................... a 10.0 Customized fixed ID ............... 1o 11.!) Installation requirement 11 for receiver """""""" 12.0 Installation requirement .......... 12 for DEVO 7E battery pack 12.1 DEVO 7E Battery Charging ------- 12 Part two: Helicopter 1.0 System Menu ----------------------- 14 1.1 Language setting ................ 14 1.2 Display ......................... 14 1.3 Buzzer warning - 15 1.4 Vibrator - 15 1.5 stick Mode - 15 1.6 Stick Direction ................... 15 1.7 Stick Calibration .................. 15 1.8 About --------------------------- 15 2.0 Model Menu ------------------------ 15 2.1 Model Select .................... 15 2.2 Model Name- 17 2.3 Model Copy ..................... 17 2.4 Model Wireless copy .............. 17 2.5 Model reset ..................... 13 2.6 Type Select ..................... 19 2.7 Trim System --------------------- 19 2.8 Stick Position Switch .............. 19 2.9 Device select -------------------- 20 2.10 Device Output - - 20 2.11 Swash Type .................... 21 2.12 Fixed ID ....................... 21 2.13 Sensor setting .................. 22 3.0 Function Menu - 24 3.1 Reverse Switch .................. 24 3.2 Travel Adjust -------------------- 25 3.3 Sub Trlm ........................ 25 3.4 Dual rate and Exponential- - 25 3.5 Throttle Hold -------------------- 25 3.5 Throttle Curve ------------------- 27 3.7 Mix to throttle - 28 3.8 Gyro Sensor -------------------- 29 3.9 Governor ........................ 30 3.10 swash Mix ..................... 31 3.11 Pitch Curve ..................... 31 3.12 Program Mix .................... 33 3.13 Monitor ........................ 35 3.14 Fail safe ----------------------- 35 3.15 Sensor View 36 3.1 6 Trainer ......................... 37 3.17 Timer .......................... 33 Part thre rplane 1.0 System Menu ....................... 40 1.1 Language setting _ 40 1.2 Display .......................... 40 1.3 Buzzer warning .................. 41 1.4 Vibrator ------------------------- 41 1.5 Slick Mode ...................... 47 1.6 Stick Direction .................... 42 1.7 SIiCk Calibralion ------------------ 42 1.8 About --------------------------- 42 2.0 Model Menu ........................ 42 2.1 Model Select ..................... 42 2.2 Model Name ..................... 43 2.3 Model Copy ---------------------- 43 2.4 Model wireless copy ............... 43 2.5 Model reset ...................... 44 2.6 Type Select --------------------- 45 2.7 Trim System ..................... 45 2.8 Slick Posilion Swilch -------------- 45 2.9 Device select -------------------- 46 2.10 Device Outpul - - 47 2.11 Wing Type ...................... 4a 2.12 Fixed ID ----------------------- 49 2.13 Sensor setling ------------------ 50 3.!) Function Menu ...................... 52 3.1 Reverse Switch ................... 52 3.2 Travel Adjust ..................... 53 3.3 Sub Trim ......................... 53 3.4 Dual rate and Exponenlial -- -53 3.5 Throttle Hold ---------------------- 54 3.6 Throttle Cun/e --------------------- 55 3.7 Differential ........................ 56 3.8 Balance .......................... 53 3.9 Gyro sensor ---------------------- 59 3.10 Governor ........................ 50 3.11 Aileron to Rudder Mix ............. 60 3.12 Elevatorto flap mix ............... 51 3.13 Rudder lo aileron/elevator mix ----- 52 3.14 Flap System ..................... 52 3.15 Aileron to flap mix ................ 53 3.15 Program mix ..................... 64 3.17 Monitor .......................... 57 3.18 Fail safe" 67 3.19 Sensor View ..................... 67 3.20 Trainer .......................... 53 3.21 Timer ........................... 59 4.0 Upgrading .......................... 70 5.0 Hot keys usage ...................... 70 Part one General information oleUen ion DEVO 7E DEVO 7E takes 2.4 GHz Direct Sequence Spread Spectrum (DSSS) technology and features automatic ID binding, automatic ID assignment, and also features fixed ID set by you yourself. The usage of Wireless copy function keeps you away from the trouble in wire link- up. Two mode types of helicopter and airplane are available to meet your requirements for different models. Matrix LCD is used and it offers you convenient operation. Online update via USB ensures a transmitter in hand not to be out of date and makes it full of vigour. cleUethion DEVD 7E 0 General nforma on 1.1 Important statements Welcome to use the DEVO 7E transmitter (’i) The transmitter is suitable for experienced pilots beyond 14 years old. (2) Flying the model aircraft in approved ground is a must. (3) We are not responsible for any safety caused by operation, usage or control once the transmitter is sold out. (4) We consign our distributors to offer technical support and semice after sale. Please contact the local distributors for problem solutions caused by usage. operation. maintenance. etc. 1.2 Safety needing attention (1) Faraway from obstacle and people. RC aircraft in flights is uncertain of flight speed and status. which potential risk exists in when flying. Please keep your i. radio controlled aircraft far away from people. high buildings. : highrtension line. etc. and avoid operating in rain. storms. thunder and lightening. (2) Away from humidity environment Radio controlled aircraft should be kept away from humidity and vapor because it is composed of complicated precise electronic elements and mechanical parts. (3) Proper operation Use original spare parts to upgrade. modify or maintain your equipment in order to assure its safety. Please operate your equipment within the range of functions permitted. It is forbidden to use out of the safety laws or regulations. i (4) Safety operation Operate your equipment according to your body status and flight skills. Fatigue. listlessness and mis-operation will increase the possibilities of accidental hazard. (5) Away from heat sources The inside of the transmitter is composed of precise electronic components and mechanical parts. Keep it far away form heat sources and sunshine to avoid distortion. or even damage caused by high temperature. 1.3 Attention before flight (1) Ensure the battery packs of both transmitter and receiver are fully saturated. (2) Ensure both the throttle stick and the throttle trim of your DEVO 7E stay at the lowest positions before operation. DEVD 7E 72 deUention Welcome to use the DEVO 7E transmitter DEVD 7E (3) Strictly obey the order of TURN-0N and TURN-OFF before operation. When starting your flight, turn on your DEVO 7E first, and connect the battery to the aircraft last. When turning off the aircraft, disconnect the battery first, and turn off your DEVO-10 last. Ari upset in the order may cause your aircrafl out of control. Cultivate a correct habit of turn-on and turn-off. (4) Ensure whether the directions and actions of all the servos in your RC aircraft are correct when executing commands of the transmitter. Using broken servos will result in unforeseen dangers. 2 0 Features 2.1 Transmitter DEVO 7E (1) The DEVO 7E adopts 2.4 GHz Direct Sequence Spread Spectrum (DSSS) technology and features automatic ID binding and ID assignment. It can also be customizedly set as fixed ID code. (2) USB online update makes you always enjoy the latest program. (3) Adjustability of hi-frequency output power enjoys more personality and friendly environment. (4) Wireless data transmission between two DEVO 7E helps experience the training function. (5) Up to 3D-model data can be saved. (6) DEVO 7E adjusting the gyro sensitivity makes hovering flight and fancy flight in an easy way. (7) Shape deSign accords with human engineering and provides comfortable holding. (8) DEVO 7E can be freely switched among Modes 1, 2, 3, and 4. (9) DEVO 7E is suitable for helicopter and airplane. In the helicopter mode, there are two flight modes,eaoh of which can be freely set and its parameters can be personalizedly adjusted to meet the requirement for F3C or 3D aerobatic flight. 2.2 Features of DEVO-RX7D1 (1)Adopts 2.4GHz Direct Sequence Spread Spectrum (0858) that features fast reaction and strong anti- jamming protection. (2) Double receivmg circuits and signal switch automatically effectively assure the stability of receivmg signal. (3) The single chip Microco as CPU provides super-strong analyzing ability. (4) The receiver maintains the frequency and the ID memories when its changing a new battery pack with the transmitter powered on . (5) It can be oustomizedly set as fixed ID and automatic ID assignment. 0 SpeCi ication 3.1 DEVO 7E transmitter Specification Encoder 7-channel micro computer system Frequency -- - 2.4GHz DSSS Output power .................. 5 100 mW Current drain ------------------ S 200 mA (100 mW) Power Supply ------------------ 5# Battery 4 X1 .5V or NiMH 4 X1 .2V 1,600 , 2000 mAh Output pulse tttttttttttttttttt 1000 e 2000 Ms (1500Ms Neutral) 3.2 Receiver specification Type ......................... 2.4GHz 7 channejs SensitiVity ..................... _ 105 dbm Frequency interval -------------- 2 4 M Weight ....................... 11.5 g Dimension -------------------- 43X28X16mm Receiver Battery ............... 4.5-6V 1,300mAh DEVD 7E 73 oleUethion DEVD 7E 4 Deflnltlon of DEVO 7E 4.1 Panel definition Welcome to use the DEVO 7E transmitter Antenna Handie HOLD Switch FMOD Swllch Eyelet THRO Trim ELEV/RUDD Slick THRO/AILE Slick ELEV Tm“ Power Swiicn RUDD Trim AILE Trim EXT ENT UP+ DNr LCD Dispiay 4.2 Rear definition Battery Pack cover MINI USB Socket Digllai signal Charge socket Convener (CHG) sockei (DSC) (1) Charge socket (CHG) input DC 51187121200 mAn; Polarity: e—sge (2) Digital Slgnal Converter socket (DSC) used for simuiaior flight pracllce via computer (Vou need software and its dongle which are avaliabie in hobby shops) and iorirairiihg. (3) MINi USE Socket The Mini USE socket combined wilh PC machine can upgrade the device program DEVD 7E 74 (JeUenlion Welcome to use the DEVO 7E transmitter DEVD 7E 4.3 Wiring Diagram _l’ ‘ I- l; A Elevator servo _r ‘ I? l; A Aileronservo _l’ ‘ Ia. :aa lk 1 Antenna —- {' ' Throttle servo nevo-Rxml -- Recelver Ir ‘ ‘ Antenna—- 7,; A I: Rudderservo — _l' ‘7 I_ l; J Gearservo _l' ‘ I 1* EL 1 4.3V E AUXt Battery a. 9’ Auxz Power Switch ,7 Chargejack 4.4 Function keys in panel There are 6 tunctlonal keys ln the panel of DEVO 7E. Below are the details: 1 EXT: Reset key. Press EXT to exit the main menu. 2 ENT' Confirmatlon key. Press ENT to access the system or the functlon mode. 3 UP, Moves cursor up to the fowvard function item. ( l ( l t ) (4) DN-. Moves cursor down to the next function item. (5) R+2 Moves cursor rlght to increase the setting value. ( ) 6 L-: Moves cursor left to decrease the setting value. 0 Co | St ck Adjustme Remove the lett lateral , rlght lateral left and right non-sllpplng blocks, respectively. Remove the fixed screws A. B, C. D. and E, and then remove the base plate. nght non- Lett non- Sllpplng block Sllpplng block right lateral nnn- left lateral nun slipplng block slipping block DEVC] 7E 7 5 AeUenLon Welcome to use the DEVO 7E transmitter DEVO 7E Below are shown the inside views of left and right throttle sets, respectively. Use cross screwdriver to loosen and remove Linkage Fixed Screw, Screw F. Screw G, and Throttle Control Spring in right throttle set, respectively, and then mount them in the corresponding positions in left throttle set. And then adiust the stick tension according to your habit. Screw G Control Stick Tension Adiustment cheth or G) Screw G Screw F throttle set Right throttle set 6.0 Neck Strap Usage There is a concealed hook in the face panel of DEVO 7E. It Will pop up as you press the hook. The neck strap can be connected to the hook. The Hook located at the center helps to get optimal balance of the transmitter. Neck Strap Eyelet 7.0 Stick Mode Switch There are total four stick modes from MODE 1 through MODE 4. The lefl-hand throttle includes MODE 2 and MODE 4, and the right-hand throttle includes MODE 1 and MODE 3. Below is the sketch map: It l' iZIIZlE 1E . Made 1 ‘ '1 El le ‘ - Joe 4 MODE 2 MODE 4 MODE 2 and MODE 4 are listed in left-hand throttle. l'-.-'1IZIIZ|E 3. MODE 3 MODE 1 and MODE3 are listed in right-hand throttle DEVD 7E 7 B cieUeniion Welcome to use the DEVO 7E transmltter DEVD 7E 8.0 Sw'tches een left hand and 'gh hand throttles The throttle switch between the left hand and right hand will be successful if both the MECHANICAL sWItch and ELECTRONIC SWItch are flnished, separately. Below are the methods for switchlng: 3.1 Right-hand throttle switched to left-hand throttle (1) MECHANICAL switch Remove the left lateral and right lateral non-slipplng blocks and the left and right non-slipping blocks on the base plate, respectively. Remove the fixed screws A, B, C, D, and E, and then remove the base plate. ngnt non- Left non- slipping block Slipping block rlght lateral non- left lateral non slipplng block sllpplng block Below are shown the inside views of left and right throttle sets, respectlvely. Use cross screwdriver to loosen and remove Llnkage Fixed Screw, Screw F. Screw G, and Throttle Control Spring ln right throttle set, respectively. and then mount them in the correspondan positions in left throttle set. And then adlust the stlck tension according to your habit. Linkage leed Screw Screw F Screw 6 Linkage Fixed Screw Throttle Control Sprmg Screw F nght throttle Set Left throttle set {2) The ELECTRONIC swltch In the main interface,press ENT to access the maln menu,Press UP\DN to choose “system rnenu";Press UP\DN to choose “stick model" and access via “ENT” key,or to choose “model 2M" and confirm via ENT key.make a mark “¢" before the choosed model. Press EXT to exit after setup complete. IE Elli I: i'-.-'1IZII2|E IE IZIIjEI ' l_lle;I i‘ IIIIZIEl ' M [I I1 I3 .1 Through the mechnical and electronic swith,the rlght hand throttle SWItch to the left hand successfully and can be used normally. Flt“? PEI . v. E DEVD 7E 7 7
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Title : Manual of DEVO 7E(1-9页).pdf Author : Administrator Creator : pdfFactory Pro www.fineprint.cn Producer : pdfFactory Pro 3.52 (Windows XP Professional Chinese) Create Date : 2012:07:10 17:21:07+08:00 Page Count : 9EXIF Metadata provided by EXIF.tools