GuangZhou Walkera Technology DEVO-7E 2.4GHz Transceiver User Manual Part 8of8
GuangZhou Walkera Technology Co., Ltd 2.4GHz Transceiver Users Manual Part 8of8
Contents
Users Manual Part 8of8
cleUenlion Welcome to use the DEVO 7E transmitter DEVO 75 11.1) Channel Current setting channel is Aileron System default can not be set (1.2) Setting for Pos 0 Press UP or DN to choose Pas 0. press R or L to increase or decrease differential Value, respectively. The adjustable range is t 100%. (1.3) Setting for Pos 1 Press UP or DN to choose P051. press R or L to increase or decrease differential value, respectively. The adjustable range is s 100%. Differential Channel Diiierenlial P133 I] All emn P05 0 Pas i (1.2) Setting for Pas o (1 3) Setting for Pos 1 (1.4) Switch selection It is possible to switch by Setting Switch when differential is in use Press UP or DN to choose Switch, press ENT to enter interface at Switch selection. press UP or DN to choose desired item. Press ENT, the desired item whose left side will be changed into '1' from “0". if two or more items are selected. the item should be chosen, whose left side should be changed into“1"from “0". Press EXT afler finished it Differential P03 1 @Fligm Mod 0 l3 @Flight Mode l @Flap Normal Switch (2) Rudder difterential setting V-Tail should be previously set in Wing Type of Model Menu it the rudder dillerential function is activated Refer to “2.11 Wing Type". And then the (allowing interlace will be shown: Differential C hann el Ll dd (2.1) Selling for Pas o Press UP or UN to choose Pos 0, press R or L to increase F' 0 3 D or decrease dilferential value, respectively. The adjustable n - range is s 100% (2 2) Setting for Pus 1 Press UP or DN to choose Pcs1, press R or L to increase or decrease differential value, respectively. Tne adjustable range is s 100% (2 3) Switch selection it is possible to switch by Setting Switch wnen dilierentiel is in use Press UP or DN to choose Switch. press ENT to enter interface 01 Switch selection, press UP or DN to choose desired item Press ENT, the desired item whose lefl Side will be changed into “1" from “0" if two or more items are selected, the item And should be chosen, whose left sioe should be changed into “1 " from “0" Press EXT after finished it DEVD 7E , 57 (ieUenlion DEVD 7E Welcome to use the DEVO 7E transmitter Diflerential P09 1 @Flight Mode 0 @Fllghl Made 1 @Flap Normal Switch (a) Flap diiierential setting it should be previously set the flap dual channel lunotion in Wing Type ot Model Menu (refer to “2.11 Wing Type") in order to aotivate the menu oi Flap Differential (3.1) Setting for Pos 0 Press UP or DN to choose Pos 0, press R or L to increase or decrease differential value, respectively The adjustable range is a 100% (3.2) Setting for Pos 1 Press UP or DN to choose P051. press R or L to increase or decrease differential value. respectively The adjustable range is s 100% (3.3) Switch seleotion it is possible to switch by Setting Switch when diirerentiel is ln use Press UP or DN to choose Switch, press ENT to enter interface at Switch selection, press UP or DN to choose desired item Press ENT. the desired item whose left side will be changed into “1" from “0" lf two or more items are selected, the item should be chosen, whose lett side should be changed into “1" tram '0". Press EXT after finished it Difiei‘entia P03 1 Switch in. @Fllghl Mode 1] @Fllght Mode 1 @Flap Normal Swttcn 3.8 Balance This function can adjust the parameters oi the two servos which are used in the dual channels. it should be previously activated one of these wing types of Flaperon, Delta, and v Tail ln Wing Type at Model Menu Referto "2 11 Wing Type" Setting method: Press ENT to enter into Main Menu, press UP or DN to ohoose Function. Press ENT to enter into Function menu. press UP or DN to choose Balance Press ENT to enter interface oi Balanoe setting, picture as right: (1) Channel: ourreni setting channel is Aileron. System delault can not be set (2) Point parameter adjustment Point< Right Setting: Press UP or DN to choose “PoinK . . . Righr'. li need to adjust the value. press L (0% means no P Ul I'll < R lQl'li adjusting) A minus value means the amending direction is downward; press R to adjust value(0% means no adjusting). A plus value means the amending direction is upward The adjustable range is t100% DEVO 7E 7 SE AeUenkon Welcome to use the DEVO 7E Iransmitter UtVD ,t PainlsRight Selling: Press up or DN lo choose “PoinlsRigm”. Press R or L lo inhibil or aclive ii need lo adiusl please aclive il. There wlll be expanded value adiuslmenl ilem. Press UP or DN lo choose "0%" li need lo adjusl lhe value, press L (0% means no adyusling) A minus value means lhe amending direclion is downward; press R lo adjusl value (0% means no adlusling) A plus value means lhe amending direolion is upward The adnislable range is 100% in§$i lem—Hmm i 'lan' lem-Hmm ‘ Anti IIIIEIII Press UP or DN. there will be selling [or Poinls‘l. Polnls2. Points} PointsLefi, Poinl>LefL reler to the selling melhod as above. Press EXT aller finished II. @“""‘___“" 3.9 Gyro sensor This funolion offers lhe gain adiuslment lor gyro sensor, which can be manually sel lhrough HOLD sWilohes or Flighl mode swilch. and also is possible lo be auiomalieally svvilched among various gains lhrough liighl mode swilch. (The liighl mode should be aclivaled Reler lo “2 9 Device Selecl") Selling melhod: l6 yro Sensor Press ENT to enter Main menu: Press UP or DN to choose M 0 d 9 Function menu. Press ENT to enter Function menu. Press UP or DN lo choose Gyro selling. press ENT lo enler lhe selling inlerlace ol Gyro selling. C h an H El \ll‘l (l) Manual Selling ALL ll. (1 1) Manual Selling Under Gyro selling interface. press UP or DN lo choose Mode, press R or L lo gel Manual selling or Aulomalic Selling ( Aulomalic selling can be aclivaled ii Flighl mode is acl, reler lo “2.9 Device seieclion" ) Choose “Manual Selling" ll .2) channel: The delaull selling is AUX 2 ll is possible lo aller inlo olher channels by choosing in lhe ilem of Device Dulpul lreler lo “2 ‘lO Device Output“). (1 3) SWilch seieclion: Under Gyro selling inlerrace. press UP or DN lo choose SWilch. press R or L lo expand inlo lwo arlicles: FMOD sw. HOLD sw. Choose lhe desired swilch lor Manual conlroi (1.4) Gain Selling: If the switch selec‘ion is two level. then only Pas 0 and P05 1 can be selted Individually. (‘l 4.1) Status lurn lhe selling gyro conlroi swilch,lhe slalus ilems will display lhe currenl swilch slalus posilion (‘l 4.2) Pos o:Press UP or DN lo move lhe navigalionai mark lo Pos 0 and press R or L lo increase or decrease, respeolively, lhe value lllhe gyro used has lwo modes oi NOR and Avcs, NOR Wlll be aclivaled when lhe value is less lhan so 0% ln NOR mode. lhe smaller lhe value is. lhe bigger lhe gyro sensor gain Wlll be. The iaclory selling is so 0%. (l 4 3) “Pos 1" is lhe same selling way as above “Pos 0" l2) Aulomalio selling (2 llAulomalic Selling: in lhe Gyro Sensor inleriacepress UP or DN lo seiecl lhe ilem ol Mode. press R/l. lo selecl Manual or Aulomallc oplions Seieol Aulomalio (2.2) Channel The deiauil selling is AUX 2 ll is possible U e la, I lo aller inlo olher channels in lhe inlerlaoe of Device Oulpul /\L (Reler lo "2 10 Device Outpul") (2.3) Swilcnflhe swilch (unmion isn'l available under Automatic selling. DEVD 7E s 59 ,(leUenlion DEVI: 7E Welcome to use lhe DEVO 7E (ransmlfler (2 4) Status:turn the Flight Mode switch.the status display present llight mode positioh.There are “Flight Mode light Mode 1" etc (so. . l G Iy (2. 5) Flight Mode 0: Press UP or DN to select Flight Mode 0 press R/L can increase ordecrease the value individually l til it the gyro used has two modes ol NOR and Aves, NOR . _ will be activated when the value is less than so 0% in NOR Fll El hl_ l . 1 Li lj r: I] mode, the smaller the value is, the bigger the gyro sensor Fl! '3 hi M I] lj P II gain Wlll be The lactory setting is 50.0% (2.5) Plighl Mode 1 selting reler lo “Flight Mode 0".Afler finishing lhe set. press EXT to exit. 3.10 Governor Before selup this lunotion, “Governor‘ should be set and activated in “Device oulpul" interlaoe (Referlo 2 to Device Outpul) The control proportion orgovernor can be separately set in various llight modes For the absolute revolution amount. please set in external governor. The amount shown in DEVO 7E governor is just a percentage for relerenoe The actual revolution should be read in the external governor. Selling Method _ -7 7*) w, Press “ENT‘ to enterthe “Main menu" interlaoe;Press "UPIDN" l G— 0' *3 m or to make the navigation mark to select “Function menu" Press 2—1le "ENT" (0 “FurICaIIorI menu”.Press UP/DN (0 choose “Govemor‘ then press ‘ENT‘ key to enter the Governor setting Fllg m M 0 0 EU interfacewhieh display lhe options of Status and channels, 0 h 3:5 l'll'lel Press uP/DN.there are options or “Flight Mode 0". “Flight Mode 1". “Flight Mode 2"and so on. (t) Status Turn the Plighl Mode sWitchthe status set display presenl llight mode position There are “Plight Mode 0",“Flighl Mode t" and so on. (2) Channel: The setted channels Will display in "2.10 Device output" (reler to 2.10 Device Output) (3) Flight Mode 0 Press “UP/DN" to make the navigation choose the "Flight l Fl | l' l 1 ll Mode O”sel, press R/Lto increase/decreasethevalue.Ttie l3 ll '4 Oil . rectory delaull value is 0% ,adjustable range + (25% — (4) “Flight Mode ‘l" setting reterto "Flight Mode 0". PI | g ht Made 1 Press EXT in exil afler rlnlshed. 3.11 Aileron to Rudder Mix This lunction is possible to execute lhe mlx oraileron to rudder. which is controlled by svvitch. Setling method: Press ENT enlerlo Mam menu, press UP or DN to selecl Funcllorl menu Press ENT enlerlo Funcllon menu Press UP or DN selecl Ailerurl to rudder mlx,press ENT Io enler inlo Alleron Io Rudder mix selling inlerface lAllte n in Rudd or P 0 H U Len Press UP or DN select leftward mix value. press R or L. ieriward mlx value of aiieron to rudder vviii be Changed. P U" n RI 9 hl The mix direction Wlll be revlsed by changing the sign of plus or minus before lhe value The adJustable range is 1125%. (1) Pos 0 Setting lertward setting (2) Pos 0 Setting rightward setting Press UP or UN to select rlgrltward mlx valueV press R or L rlghlward mlx Value 0' alleron Io rudder wlll be changed The mlx direclion will be revised by changing the sign or plus or minus belore the value The adjustable range is 1125‘Vo DEVD 7E 7 SO oleUenlion Welcome to use the DEVO 7E transmitter DEVD 75 is) Pos 1 setting. the setting is same as above. (4) Throttle stick setting The switch between Pos 0 and Pos 1 can be realized by setting the position of throttle stick Press UP or DN of Throttle Stick to set the position amount of throttle stick The default setting is inhibit The adjustable range is 0.0100 0%. (5) Switch setting The switch will display the current switch position press UF' or DN to select the desired item press ENT to the setting interface and “0" before the item will be changed into “1". lf two or more items are selected, the item And should be selected Press EXT to exit afler finished Aileron to Fiudd Swillztl Throttle Stick rllj Inhibit @Fllght Mode El Switch @Flight Mode l @Fiap Normal 3.12 Elevator to flap mix This function is used to execute the mix of elevator to flap Press ENT enter to main menu.press UP or DN to select function menu Press ENT to enter to function menu. Press up or DN to select Elevator to tlep mixpress ENTto enter to Elevator to nap mix setting interiace. Elevator o Flap mi (”Posoupsemng P08 0 Up Press UP 0! UN to move the navigational mark to select item Pos 0 UP, press R or L upward mix value of Elevator to flap mix will be changed The mix direction will be P 09 U DO ND 0 revised by changing the sign or plus or minus belora the U (6 value. The adjustable range is 112%. (2) Pos 0 Down setting Press UP or UN to move the navigational mark to select item Pos 0 Down. press R or L downward mix value of Elevator to flap mix will be changed The mix direction will be revised by changing the sign of plus or minus before the Value The adjustable range is t125"/u (3) Pos 1 setting. the setting is same as above. (4) Throttle stick setting The switch between Pos 0 and Pos 1 can be realized by setting the position of throttle stick. Press UP or DN of Throttle Stick to set the position amount of throttle stick. The default setting is lnhibit. The adjustable range is 0.0100 0%. 15) Switch setting The switch will display the current switch position Press UP or DN to select the desired item, press ENT to the setting interface and '0" before the item will be changed into “1" lf two or more items are selected, the item And should be selected Press EXT to exit after finished Elevatorto Flap mi Sui/lion Throttle Stick rnj inhibit @Fllght Mode El Switch @Flight Mode l @Flap Normal DEVU 7E * B’I ,(JeUenlion DEVD 7E Welcome in use the DEVO 7E (ransmlher 3.13 Rudder to aileranlelevalor mix Thls func‘lcn ls used to execute the mlx of rudder Io allerorllelevator .H wlll help ellmlrlate waver or shake Caused by rudder stlck operallon Setting method: f} Ulj [1 Press ENT to enter Main Menu in the main interfaceand EH33 31m Pn U |_‘ press UP or UN to make the navigation mark to choose — "Furlcllon Menu".Press ENT (0 enter “Furlc‘lorl Menu".ther\ ‘ press UPorDN to choose “Rudder to aileron/elevator mix" l ElE'v'BIIJI F‘U.. U FH gm and press ENT to enter “Rudder to aileron/elevator mix" U" setting interlace (1 ) Elevator setting (1 1) Elevator Pos 0 Leftward setting Press UP or DN to make the navigation mark choose "Elevalur Pos 0 Lettward setting"item,and press R or L to change the value and the Elevator le amount when operating Rudder leftward The mix direction will be revised by changing the slgn of plus or minus berore the value.The adjustable range is e125%. (1.2) Elevator Pos 0 Rightward setting Press UF or DN (0 make the navlgatlcn mark Choose “Elevator P05 0 nghMard settlrlghtem‘and press R or LID change the Value and the Elevator mlx amount when cperatlrtg Rudder rlghtward .The mlx dlrectlon wlll be revised by changing the sign of plus or minus betore the value The adjustable range is :125% (1 3) Elevator Pos 1 setting reier to “1 1 Elevator Pos D"selting (2) Aileron setting (2.1) Pos 0 setting: reterto "1.1 Elevator Pcs 0"setting (2.2) Pos 1 setting: reterto "1.1 Elevator Pos 0"setting (3) Throttle stick setting The swltch between Pos 0 and Pos 1 can be realized by the position or Throttle Stickthen press R or L to change the value or lnhipit Change the value to set the Thottle stick position The detault setting is “inhibit",the adiustable range is (mm 0.0 to 100.0% (4) SWitch setting SWiteh item Wlll display the current SWitoh position Press UP or DN to make the naVigation mark choose “Switch"itemand ENT to enter the selectable sWitch intertaoepress UP or DN to make the navigation mark choose the desired Switch Press ENT to oonhrm and change the left sign from “0" into “1" If two or more items are selectethe ltern And should be selected and then the la“ slgrl "0" WM be changed mm "1" Press EXT lo exlt afler finished IEJFHQM MUSE I] (EtFli‘am f'-.-‘1l_lt2|t: 1 3.14 Flap System This lunction can modily some eflecls on elevator it is possible to set 2 status of elevator through 2—way tlap control sWitch. Setting method press ENT to enter Main Menu in the main El '1': interlacethen press UP or DN to make the navigation mark lJI Nmrttal rttt choose “Function Menu".press ENTto enter Function Menu. LIU?’ Press UP or UN to choose ”Flap System" and (hen ENT ‘0 V _ enter its setting interlace . Letl‘l d (1) Elevator setting [1 1 L There are 2 options 0 Normal and 1:Land. ' DEVD 7E7 52 cJeUenlion Welcome to use the DEVO 7E transmitter DEVD 7E (1.1) Elevator 0:Normal position press UP or UN to make the navigation mark choose “Elevator 0:Narmal".and press R or L to change the elevator mix amcunt.lt is possible to change the direction by altering u or D oelore the amount.The delault setting is 0%.and the adluslable range is U125% - D125%. (1.2) Land position: Please reler to "1.1 Elevator o:Ncrmal"setting (2) status Press UP or DN to make the navigation mark choose "Status",then vibrating the flap switchtrerer to 2 9 Device select) Will display current position (3) Auto land (3.1) Throttle stick setting Press UP or DN ‘0 make me navigation mark choose"Throltle stick'flemand press R or L to Change value or Inhibit.“ is possible to same position when changing the value.Trle default selling is “inhibit".arld adjustable range Is [rem 0.0 to 100.0%. Flight Mod LI MITCH (3.2) Flight mode 0 setting It is possible to set a certain night mode sWitch automaticly alter automatic land When do this you must come to "wing type" setting intertaoe under the Model Menu and make correspond wing type setling Refer to 2 11 Mg type “a, 7 . r "gin. a i 'i ‘_. | Press UP or DN to make the naVigation mark choose “Plight ‘w mode 0"ilem,anct press R or L to 3 options Switch, 0 Normal Fl | Q m M I21 [1 P n and 1:Land.lt is Mannul control when choose “Switch".but W C h Automatic contrci when choose Flight mode switch position . Fllght Mode 1 SWITCH 5 (3 3) Flight mode 1 setting refer to “(3 2)Fllght mode 0 semng" Press EXT to exit aflerflnlshed. 3.15 Aileron to flap mix The luncticn aims at mixing llep when operating aileron slick, and can set sWilch. The flap dual channels should also be previously activated at Wing Type in Mode Menutreler lo"2 1t Wing Type") Setting method Press‘ENT" to enter inm“main menu", press UP or DN to make navigalion mark seleot'tunotion menu". press“ENT'Iu enter lnto‘Vunctlon menu". press UP or UN to select "Aiiemri to flap mix". press"ENT" to "Aiiemn to llap mlx"desigrled Pg 3 |j F“ g ht lrllerrace. ‘ ‘ (1) P05 010 leftward setllng . 7 7 Press UP or DN to make navigation mark select “Pos 0 to lenward setting".press R or L to change the leftward mix value ot aileron to llapthe mix direction will be revised by changing the sign ot plus or minus belore the value.the adiustaple range is :125% (2) Pas o to rightward setting press UP or DN to make navigation mark select “Pos 0 to rightward setting".press R or L to change the rightward mix value or ailren to llap.the mix direction Will be revised by changing the sign at plus or minus before the valuethe adjustabie range is 2125?”. (3) Pos 0 to lellward setting: reler above "(1) pos o to left setting" (4) Pos 0 to rightward setting: reler above“(2) pcis o to right setting" DEVD 7E7 53
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Modify Date : 2012:07:05 09:34:33+08:00 Create Date : 2012:06:28 20:45:56+08:00 Metadata Date : 2012:07:05 09:34:33+08:00 Format : application/pdf Document ID : uuid:55200b0a-7dec-46ce-9437-8c8b6e02dda0 Instance ID : uuid:fc589a31-5e28-457c-a997-797c45ef6cc4 Has XFA : No Page Count : 7EXIF Metadata provided by EXIF.tools