| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1892625 |
| Application ID | /8oaDEFXdIIfJ4kBGuXecQ== |
| Document Description | Users Manual part 3of5 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 298.25kB (3728129 bits) |
| Date Submitted | 2013-02-02 00:00:00 |
| Date Available | 2013-02-02 00:00:00 |
| Creation Date | 2013-02-02 09:24:59 |
| Producing Software | Acrobat Distiller 10.1.4 (Windows) |
| Document Lastmod | 2013-02-02 09:43:12 |
| Document Title | 06_S29DEVO-F7_user_manual page 29-36.pdf |
| Document Creator | Adobe Illustrator 10.0.3 |
| Document Author: | TDN1963 |
(JeUenlion
Welcome to use the DEVO F7 transmitter
DEVD F7
(3.2) Output
Alter finishing above setting , there is a “Output "selection. press DN to move the cursarate palm to "Output"
setting. press R+ or La amend output data. Mm value 0.0%. Max value 100.0%. “in" and “Out" display the
throttle stick input and Output level.
(4) Stunt 1, Stunt 2, Thmflle Hold can be set separately in Pllch curve semngs, Please referto above settings.
Press EXT to exit.
Tne basic examples are only for your reference Adlustrnent to the real (lights is a must.
Throlfle curve Pitch curve
IUU’e
+ID'
7515
Normal llrgnt
we
23% ~
ma
Throttle curve Pitch curve
luui; mull
+9
75% wt
6% 7m
+5'
suit sou/t
model m
40%
25% 25M
,5
on 0%
l l 2 M i 4 H i 1 2 M 3 4 H
Pitch curve
”10%
75%
gm mode 2
50%
1007a
75%
Automation mom 5qu
2575
(we
DEVD F77 29
oleUeniion
Welcome to use the DEVO F7 transmitter
DEvcl F7
3.12 Program Mix
There are 8 series of program mix, mix channels and values are adjustable.
Setting Method:
Press ENT to the Main Menu Press UP or DN to move the cursorato pomt P’ ”ram '1‘ "
to Function Menu. press ENT to Function Menu; Press UP or DN to move
the cursoreto point to Program. press ENT to Program setting interface.
see the right illustration:
And press ENT to program mix setting and current status (detault setting
is “inhlbit”) intertace Press R+ or L- to choose Inhibit, normal or curve
Fro-tram rm 1
s u )nh‘h‘l
ltornnl
Eurue
Take “program mix 1' tor example. there are 'normal" and “curve" setting
(1) The “normal" setting or “program mix"
Press UP or DN to move the oursoreto point to the “Norrnal”setting, Press ENT button then pop up "All Servos
Hold?' Press R or L to choose OK or Cancel.
lt"OK' selected, all the servos will be locked "0‘3”” r1: ‘ l "7375‘" ”V" '
in the current status, it “Cancel" selected,
all servos are unlocked Press ENT enter W ‘ 5‘“ “'15 ”0“" “”3”"
to Program Mlx 1 setting interface
Elevator
oux
canoe l o
(1.1) Master channel setting
Press UP or DN to move the cursorato polnt to Master Channel setting, press ENT to the Master Channel
setting interface Press UP or DN to move the cursorAto point to the desired Master Channel, press ENT to
confirm and press EXT to be back to ngram Mix 1 interface.
(1 2) Slave channel setting:
Press UP or DN to move the cursorato
point to Slave Channel setting, press ENT
to the Slave Channel setting interraoe. Press
UF' or UN to move the Cursor23 7255
s a v Norm 2251 «so
0 av we in
5000RPM n u Knots
ADDORPM
zaeiuzuiz i .
3.16 Trainer
Two DEVO F7 transmitters can be made to work together in orderto afiera teacherrtrainermnctinn. meeting
the requirements tor a beginner The setup oi training mode is described beluw:
(1) Model data transmission
First step is to use the DEVO F7's wireless data transmission feature to transier the teacher's main model
data to the trainee's DEVO F7 transmitter This step guarantees that the model data in each transmitter is
identical Reier to item “2 4 model wireless copy' in the Helicopter section later in this manual Two DEVO
F7 transmitters are needed tor wireless data transmission.
(2) Training connection ’10 riri at H PE‘Link 7 lu
insert the signal wire trom the trainer's transmitter into the DSC socket oi
the trainees transmitter Turn on the trensmitterand a linkage iccn, PCrLink
will be shown on the boot screen Insert one end of the signal wire (included)
into the DSC socket oithe trainee's transmitter and tum it on Pc-Lihk will
be shown in the trainees DEVO F7 display (see image right).
linkage icon
Turn on the power of the trainers DEVO F7 Select the same model as the trainee (as transferred in the
previous section) and briefly fly the eirerati to confirm the settings are good Turn oftthe airciett and turn oh
the trainer‘s DEVO F7 power Insert the other end at the signal erS into the trainer‘s DEVO F7 DSC port
and turn on the power once more, T-Ready will be shown in the trainees DEVO F7 display (see image lett)
\) on at H5 r-neede 7 ll.‘
(3) Traniner Function Channel Setup
The trainee can inquire the control part or whole channel operation by setting the trainer's tunction channel
Here is the setup:
Press ENT to the Main Menu. Press UP or DN to move the cursoreto point "film i 8 SU
to Function Menu. press ENT to Function Menu: Press UP or DN to move ' E lemon Inhibit
the cursor—to point to Trainer, press ENT to Trainer Function setting; Press in when int-ml
UP cr DN to move the cursoratc point to the desired setting channel. there Won to inhibit
are Elevator, Aileron, Throttle, Rudder, Gear, Pitch, Gym Channels available “udder lnmm'
Press R+ or L- to set Active or inhibit for the choosed Channel Gear Inhibit
DEVD F7753
oleUeniion
DEVD F7
Welcome to use the DEVO F7 transmitter
14) Training mode usage
The default setting is that the training mode switch is on the top lett comer or the transmitter. named HOLD/TRN.
When llying, t the trainer operates the
‘” “‘3 ‘3‘ “6 ‘ “m" 7 “’ TRN switch. control is hanslelred control
tothetrainee: also. TrWot‘k will be shown
on the trainers DEvo F7. The tminee's
output data is displayed on the trainer‘s
DEVO F7 screen tithe trainer operates
the switch once more. the trainer regains
control over all lunctions and channels.
Please check and lamiliarize yourself with the operation of the training mode before attempting flight or a
training session in order to avoid missoperation and damage/injury.
3.17 Timer
There are two timers which can tie set as stopwatch and countdown.
respectively. Each timer can be operated by switch or by shortcut.
Setting method: Press ENTto the Main Menu Press UP or DN to move “"9th
the cursorsto point to Function Menu, press ENT to Function Menu; Press
UP or DN to move the cursoreto point to Timer. press ENT to Timer setting
. . . t-lntclr.
Interface. See the rlght Illustration: Inhibit
(1) WW
Press UP or UN to move the cursoreto point to Type. Press R+ or L- to choose Stopwatch or Countdown.
The default setting is stopwatch The time range 0' stopwatch is from 0 to 59:59 (59 minutes 59 seconds)
(2) Countdown setting
If you need countdown time manner. press R+ or L- to select the countdown
There is an expand sub-menu set time item Press UP or DN to select the ‘ ”W
option of Set time item Press Rt» or L- to set the countdown time. The
thrr 3 so
court t mm
set Tlle
settable countdown time range is from 00:05 to 59:55. W m at)
Sun rch
rnmm t
(3) Switch selection
Press UP or UN to move the cursorato point ta Switch selling There are Inhibit and available switch opllbns,
available switch can be selected by press L or R+. It includes FMOD SW12. FMOD SW 2. Mix SW12. MIX
SW 2. D/R SW. HOLD SW. GEAR SW. SF'SO SW. SF'S1 SW. SFS2 SW. SFS3 SW We can select the desired
ilem except these items oi SPSD SW, SPSI SW. SPSZ SW. and SPSS which should be previously set at
Stick Position Switch at Model Menu(refer to “2 a Stick Positlon Switch”). Press EXT to exit.
(4) Usage of timer
Press UP or DN by pressing UP key for one time. and to pause it by pressing it the second time. Press DN
to cieartimer It‘s ok to control time by Switch when time setting is finished on switch Timer will be shown in
main intereface. as below illustration:
nn nn ni P
Tlmerdlspiay
DEVD P7734
Part three
Airplane
AeUen ion
DEVC) F7
All the lunctional settings, which are relalive to the
operallcn system of DEVO F7 itseli, are fully inlegrated
in Syslem Menu. They include Display‘ Buzzer, vibrator,
Video Select, Stick Mode, Stick Direction, Stick calibration,
and About.
Setup your DEVO F7 transmitter for the best Helicopter
performance with the lollowing sections. Included are
specific functions for rotor-craft leatures‘ Throttle curves.
Pllch curves and Cyclic response are covered below.
JeLJer‘Lorthelcoms to use the DEVO F7 transmitter
DEVE) F7
1 0 System Menu
This section desoribes the settings which are specific to the operation of the DEVO F7 itsett Settings tor Display,
Buzzer. \fibrator, Video Seiectt Slick Mode. Stick Direction. Stick Calibration and About can be accessed via
the System Menu.
Below is the boot screen of Airplane:
Airplane Type display
Model No display Output Power display
Timerdisptay 10:00 at as Batterychargeindicater
Throttle ievei display Ailemn trim dispiay
Rudder trim display Throttle trim dispiay
Elevatortrim dispiay
1.1 Display
Backiight intensity: the backiight intensity is adjustable using the UP or DN button Power oonsumption will
be increased when intensity is high and battery iit'e wiil be reduced
Setting:
Press ENT to the Main Menu Press UP or DN to move the cursor‘to
point to System Menu. press ENT to System Menu: Press UP or DN to
move the cursor-to point to Display, press ENT to the Lightness setting
interface and use R or L to change the setting as desired.
Press EXT to exit.
1.2 Buzzer Setting
(1) Status: Press ENT to the Main Menu Press UP or DN to move the cursoreto pointto System Menu, press
ENT to System Menu; Press UP or UN
to move the cursor—ta point to Buzzer, 5- M
press ENT to the Buzzer setting
interieoe. And then press UP or DN to
move the cursorato point to the Status,
press R or L to toggie between 0N and
OFF settings ON means start the Buzzer
white OFF means the inhibit
(2i Throttte stio V With the “Status" item on, the option THSTK can be set to ON or OFF. tithe Throttte Stick
setting is ON/Active, e musioat soate will be heered when moving the throttle stick The position at the
throttle stick can be judged by listening to the change in musical tone Setting OFF. turns oii the sounds
. status
- etus
rnnettie _
inlitbtt
knub nidpatnt
Inhtbtt
Setting:
With the 'Status" item on. press DN to
an move the cursor‘to point to the "Throttle
mm” , Meme ettgu‘ . Stick" Use R or L to change the display
‘ ‘ between inhibit and Active Active means
stains
. throttle st
W" ”‘m‘fimw W” ”“‘”°"r‘r‘in.stt tones will be played, inhibit means there
will be no tones played
(3) Knob Midpoint: With the “Status" item on, it the “Knob midpoint" setting keeps Active, there wiii be a buzzer
at the midpoint position when tum the knobs Please chaose inhibit it the buzzer isn‘t needed
DEvcl F7736
Weieome to use the DEVO F7 transmitter—M
DEVE} F7
Setting: With the “Status" item on, press
DN to move the cursor‘to point to Knob
Midpoint. Use R or L to change the status e. .H “a.
between Inhibit and Active Active means 5"
to turn on Knob Midpoint buzzerwhile inhibn Wei 1 ie Sltgg‘ we We“ Ie Shggnw
means to turn at Knob Midpoint buzzer
+ trnet nattiumt + knnh may: m
xntntnt netwe
(4) Tone:
The buzzer tone can be selected from 10 notes You can set the tone according to your preierenoe and test
the penermenoe
min»
Setting:
With the “Status" item on, press DN to move the oursomo point to Tone '"' ”' ‘ ‘5 5‘ ‘3 we
item Use R or L key to change the fiashing vaiue trorn 1 to 10
Press EXT to exit aner finished
we
Sllfl
1.3 Vibrator
The vibrator is used as an sierm function to remind the users
Setting:
Press ENT to the Main Menu. Press UP or UN to move the cursordtci point to System Menu, press ENT to
System Menu: Press UP or DN to move the cursuratn point to Vibrator. press ENT to Vibrator setting interface
inei sini-
iitbr‘v’itiu
There are two status as inhibit and Active.
Press R or L to seiect Active or Inhi It.
Active means to start vibration. inhibit
gm , M. means to turn off vibration
Press EXT to exit after finished
IN‘itbt'
1.4 Video Select
This function provides the settings of inhibitor Active when choose the Video option There are 8 channels
for your choice at the state of Active
Setting:
Press ENT to the Main Menu. Press UP er DN to move the cursorato point to System Menu. press ENT to
System Menu; Press UP or DN to move the cursnr~tn point to Video Select, press ENT to Wdeo Select
setting interface.
l‘tdrt'i eei - . iitduir (wt-View
Press R or L to select Active or inhibit
Active means to Stan vibration, Inhibn means
to turn oft vibration. When choose Active. * “W“ WW . ‘ 5““:
there wili be an expanded list tor the
channeis options.
nor ttJE:
tiifivn seieti
Channeis options: Press DN to move the cursor’to point to Channei item
as shown in the above interieoe. Press R or L to make the Number change
between 1 to a With the 5 as image trensmmision moduie,1-a channeis
couid be choosed to reoeive the image signai
Press EXT to exit after finished.
’icnue
1.5 Stick Mode
There are 4 stick modes inniuding Mode1, ModeZ. ModeS and Mode4 Rightrhand throttie includes Mode1
and Mode3: whiie leflrhand Ihrottie inciudes Mode2 and ModeA. See Beiuw:
DEVD F7i37
oleUention
DEVD F7
Welcome to use the DEVO F7 transmitter
Mode 2 and Mode 4 are listed in \eflshand fl'trome.
MODEZ MODEA
ThroIIII Elovaior thollle Elevator
Ruddnu—I» Aillroll+ Alleran4—1—y Rudd-u—i—e
Mode 1 and Made 3 are listed in rightshartd Ihmme.
MODE1 MODES
EI-vnor Thmnll Elevator Throttl-
Ruddar+ Mlemn+ “Mum—1+ Rudder+
Setting: Press ENTto the Main Menu. Press UP er DN to move the curserato point to System Menu. press
ENT to System Menu; Press UP er DN to move the cursoralu point to
Stick Mode. press ENTto Slick Mode setting interface
There are mode 1. mode 2, mode a and mode A for options Press UP
or DN to move the numerato point to desired Item and then press ENT
to confirm
Press EXT to exit aflerfinished
1.6 Sllck Dlrecllon
Setting: Press ENT to the Main Menu. Press UP or DN to move the cursorsto point to System Menu. press
ENT to System Menu; Press UP er DN ta move the cursor—to point ta Stick Direction. press ENT to stick
Direction setting interface
Stu‘v tin-enmn
' U “'1‘?" “Uma' Slick Direction: There are Elevator. Aiteron. Throme. Rudder for options
n- is - Normal Press UP or UN to move the cursorato point to the desired item Press
rm. t re Normal R or L to change the settings at corresponding sticks There are Normal
tau-mar flannel and Reverse The defau‘t setting is Normat.
1.7 Sllck callhratlon
Setting: Press ENT to the Main Menu Press UP or UN to move the
cursorsto point to System Menu. press ENT to System Menu: Press UP W ‘D 11' 'Ww
or DN to move the cursoram point to Stick Calibratian. press ENT to Stick
Catibration setting interlace
stick Ceiibratio echenicetiy move the right stick and left stick from their minimum ieveis to their maximum
ievets severei times. and then return the sticks to the neutrei pusillons. respectiveiy.
Em to when rur is Caivhrave Press ENT again to stop the ca‘ibratian
process and the display should show the
w wra'mn Sun iotiowing interiecemetitiretion Success).
DEVD F7T38
oleUenlion
DEVD F7
Welcome to use the DEVO F7 transmitter
The calibration has tailed it press ENT and show the following intertace. Please go back to the STMOD sub
menu using EXT and restart the calibration process Press EXT to exit after finished
sttcu (altar-a
Em to rinisn
Please eelw
1.8 About
Setting: Press ENT to the Main Menu. Press UP or DN to move the
cursorAto polnt to System Menu, press ENT to System Menu; Press UP
or DN to move the cursoreto point to About, press ENT to About setting
interface. You can check the current Versions of hardware and sottware
eor toena-
Press EXT to exit afler finished.
Model Menu
Model Menu manages all lhe model data saved in mayo F7 lt includes Model Select, Model Name, Model
Copy, Model Transmit, Model Receive, Model Reset, Type Select, Trlm System, Stick Position Swilch, Device
Select, Device Output, Wing Type, PowerAmplil‘ler, Fixed ID and Sensor setting
2.1 Model Select
Setting: Press ENT to the Main Menu. Press UP or DN to move the
cursoroto point to Model Menu, press ENT to Model Menu; Press UP or
DN lo move the cursor’to point lo Model Selecl, press ENT to Model
Selecl setting interface. There are 15 different model settings be saved
Press UP or DN to move the cursorato point to select the model No you “ "“0“
want and press ENT to confirm Press EXT to exit ‘ “ "“5”
2.2 Model Name
In the menu of model name, you can make a desired name for your model tor long term storage Its data
can be directly withdrawn in next flights Repeat the step “2 1 Model Select" to choose the model you want
to name or save, press EXT to back to the interface.
A Model
9 rlodet n
H nuoei
Setting: Press ENT to the Main Menu Press UP or UN to move the
cursor—to point to Model Menu. press ENT to Model Menu: Press UP or
ND , DN to move the cursoroto point to Model Name. press ENT to Model Name
NW setling interraoe.
t‘ndPl none
Press UP or UN to move the cursorato point to select the character and
figure which are needed lo be changed, press R or L button to change lhe
character and figure, and press UP or DN to set next one Press EXT to
exit after finished
«3
meter 1
2.3 Model Copy
Setting: Press ENT to the Main Menu Press UP or DN to move the cursor»!o point to Model Menu. press
ENT to Model Menu; Press UP or DN to move the cursorsto point to Model Copy, press ENT to Model Copy
setting interlace.
nnaer nose tinder good t s su
oeuvre
Sourcc t. e model 1
Press UP or DN to choose the model you
want to be oopied as source model and
press ENT to confirm, The serial No. and
model name at Source Model will be shown
as the left Illustration.
+ a t nouel Desi
o 1 A model 1
2 e Model 2
.3 H model 3
Model
model
Model
DEVD F7739
deUenlion
Welcome to use the DEVO F7 transmitter
DEVCt F7
Press UP or DN to move the cursor»to point to select the model you want
to be copied as source model and press ENT to confirm, The serial No " “L
and model name of Source Model will be shown as the right illustration ‘ H "ml ‘
Then press UF' or DN to locate the souroe model, press ENT to confirm. 5‘ Z q H“ ‘9‘ 2
Then an enquire "Are you sure?" is popped up as lllustmlion. Press ENT
to copy, or press EXT to exit
at e sou sure"
u Model wireless copy
The model data between two DEVO F7 equipments can no wirelessly oopied via Model Transmit and Model
Receive in Model Menu.
(1) Model Tmnsmit I ’le .m
Model
nutter .
Model
, oer
’lodel
Setting: Press ENT to the Main Menu Press UP or DN to move the ourserato
point to Model Menu. press ENT to Model Menu; Press UP or DN to move
the cursDrT'to pointto MDdel Transmission. press ENT to Model Transmission
setting interface.
Press UP or DN to choose the source model which will be transmitted, and press ENT to confirm, an enquiry
information “Are you sure?" will be shown as below Illustration Press ENT to confirm and EXT to exit
n- Ari Transmlt
:ln ‘ PressENTtotransmit.“Transmitting
Planet 1 Hod-Er l
.. appears in the lnterface or press
ENT to confirm Press EXT to exit after
another DEVO F7 received the data.
are you . Transmittirl'z
(2) Model Receive
Press ENT to the Main Menu. Press UP or DN to move the cursorato point to Model Menu, press ENT to
Model Menu; Press UP or DN to move the cursoran point to Model Receive, press ENTto Model Receive
setting interface An enquiry information "Are you sure?“ will be shown as below Illustration
flour-t Renato: nudel one»
We ewe Lanna Feceule Press ENT to receive. “Connecting
and “Receiving . ...'will beshown in series
are you sure? in the interface.
point to Model data save position Press
ENT will pop up “Are you sure" Press ENT
to save, press EXT to cancel
Press ENT to oontirm and EXT to exit.
eon surge
1.5 Modal Rnsnt
Using the Model Reset function the settings for one or all models can be reset to the factory defaults
Setting: Press ENT to the Main Menu. Press UP or DN to move the cursorato point to Model Menu, press
ENT to Model Menu; Press UP or DN to move the cursoreto point to Model Reset, press ENT again to display
to model selection Use R and L to select ”ALL” for all models or the individual model name for a single model
reset.
DEVD F7740
—oleer
DEVD F7
Welcome to use the DEVO F7 transmitter
Press UP or UN to move the cursor» to
point to the desired model No and press
ENT. an inquiry "Are you sure" will be shown
as Illustration.
Press ENT to reset and EXT to cancel
Press EXT after finished
del ell
nooet i
kno [7
one Lam
2.5 Type select
This transmitter utters a choice uttwo model types The options are heliooplerand airplane.
Press ENT to the Main Menu. Press UP or DN to move the cursor‘to point to Model Menu. press ENT to
Model Menu; Press UP or DN to move the cuisoralo point to Type Select. press ENT to Type Select setting
interface.
Press UP or DN to move the cursorflo point to helicopter or Airplane option
Press ENT. there is an inquiry shows Press ENT to select the desired Heltcu! to.
model. ltthe detault model are the desired one. Press ENT and press EXT s z- Alrnlanr.
to exit
2.7 Trlni system
Trim System is able to finely tune the iollowing terms, respective levalor, Aileron. Rudder. Throttle. The
trim range is divided into 20 grades (factory deieull is set at 4) it is convenient to subtly modiiy the pitch by
adjusting the trim range
Press ENT to the Main Menu. Press UP or DN to move the Cursor‘tu point
to Model Menu. press ENT to Model Menu; Press UP or DN to move the
oursoisto point to Trim System. press ENT to Trim System setting interface
orienen
ag‘ffia. Press UP or DN to move the oursoralo point to the item that need to adjust.
Press R+ or L- can change the setup. Maxium is 20
vim,»
normal
For elevator. aileron and rudder, there are two more options: Normal and Limited. “Normal" means the trim
is always working although the corresponding
stick stays anywhere “Limited" means the ”m 5“"9"
trim is out of working when the corresponding L WSW .. ,a
slick ls at maximum position v N nal
Press EXT to exit after finished forgo.
shorter»
rr in system
c leui‘StOr
a Limited
mler‘on
t/zn
nor-net
Nnuanr
«an
Normal
4 u
wanna l
2.8 Stick Position Switch
According to the tollowing setting. the stick can be used as a switch. The turnron or turnroft position at which
stick stays can also be Settable.
Method for setting:
Press ENT to the Main Menu. Press UP or DN to move the cursoroto point to Model Menu, press ENT to
Model Menu: Press UP or UN to move the cursorsto point to Stick Position Switch. press ENT to Stick Position
Switch setting interiece
There are four options under the Stick
5 9“ position switch: SPSD. SPS1. SPsz, SPS3.
0" Press UP or DN to move the cursorato
5‘“ ‘Crl 5P5“ 5“ point to switch option Press R or L to choose
‘ mam“ E ' “am" the switch you want to define
935‘ "W “ Press UP or UN to move the Cursor‘to
0“ ‘JP point to the channel option There are Inhibit
and channel options.(Delaull setting inhibit)
lzv Pnsltufi
s suitsh
channel Intnlnl
DEVD F7741
tieUeniion
Welcome lc use the DEVO F7 lrensmitter
DEvcl F7
The channel includes four items: Elevator. Aileron. Throttle and Rudder. The factory default is inhioit. Take
Elevator for example.
Press R or L to choose the Elevator as slick, 5"
and then press DN to move the curscrAto 0"
point to value of position. it's possible to adjust 1“ '=" 5’5“ 5‘" "h 5’5“ 3“
the stick position via pressing R or L. Channel Eleuator- Channel Eleuatoi
F'ress UP or UN to move the cursor—to point “5" D ”’3‘ ‘ “’i‘ '1
to (in option. And then press Rs or L to U» + an Uh
change the ON slalus cf slick postion
Press EXT after finished
2.9 Devloe Select
This setting can help you configure various funclionai switches it includes Flight Mode swilch, Flight Mode
trim. Throttle Hold Switch and Flap Switch select
Press ENT to the Main Menu. Press UP or DN to move the cursorato point to Model Menu, press ENT to
Model Menu; Press UP or UN to move the cursorato point to Device Select, press ENT to Device Select
setting interface
(1) Flight Mode Switch
Press UP or DN to move the cursoreto point to Flight Switch items and
' F ‘ “W swing.“ . press R or L to select the desired switch. There are FMOD sw, MIX sw.
F i ,5,“ .ye m”, The factory derault setting is inhibit.
“m” (2) Flight Mode Trlm
There are two modes: Common and Flight Madei. In common mode aii
the trim values, to which various sticks are relative. put equaiiy eflec’ts
on all the rlight modes. in Flight Mode, the Trim values to which each stick is relative put, respectively, eflecl
on the corresponding stick The factory default is Common
flu—wry ruler!
lneo Hnid Bunch
HDLD su
Press UP or DN to move the cursoratc point to Flight Mode Trim, press R of L to select Common or Flight
Mode The factory default is Common
(3) Throttle Hold switch
Referto (1) Flight Mode Switch.
(4) Flap Switch Select
Referto (1) Flight Mode Switch. After finished the setting, press EXT to exit.
2.10 Device output
Device output can set up the output switches respectively it can also activate, lnh il or use other functions
The switchs include: FMOD sw, MIX sw, D/R sw, HOLD SW, GEAR SW, TRN sw, SPso, SPSi, SPsz,
SPS3 and AUXZ KB
Press ENT lo lhe Main Menu Press UP cr DN to move the cursorAlo
point to Model Menu. press ENT to Model Menu; Press UP or DN to move
the cursor-to point to Device Output, press ENT tD Device Output setting
interface. There are 3 settings: Gear, Fiap, AUXZ.
(1) Gear
Press UP or DN in Devlce output Interface can change the GEAR Switch. II inciudes FMOD SW, MiX SW.
D/R SW, HOLD SW, GEAR SW, TRN SW, SPSO SW. SPS1 SW, SPSZ SW, SPS3 SW and AUXZ KB. Press
R or L to select the setting switch, The default setting is GEAR SW
mutant
, Press UP or UN to move lhe cursorato
. 55%;“ point to Function Setting after you select the
switch, press R or L to choose the switch.
it incuides Inhibit. Active. Gym. Governor
2252 KB The detauit setting is Activate You can
continue to sel other items after finishing.
DEVD F77 42
Welcome to use the DEVO F7 transmitter—AeLJem
DEVU F7
[2) Flap
Press UP or DN to move the cursuralu ”m“ E mm“
point to Flap, press R or Lio select between R
Active, System and lnnibii. The factory . “L“ ' “2
default setting is System. When choose ggsgm , 25.5:
Active. it can be selected as Switch Coniml. W «e mm vs
It's possible to change vla pressing L to Bar: m
show Flap Output setting
(3) AUXZ
Press UP or DN to move the cursor
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.6
Linearized : Yes
Author : TDN1963
Create Date : 2013:02:02 09:24:59-08:00
Modify Date : 2013:02:02 09:43:12-08:00
XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date : 2013:02:02 09:43:12-08:00
Creator Tool : Adobe Illustrator 10.0.3
Format : application/pdf
Title : 06_S29DEVO-F7_user_manual page 29-36.pdf
Creator : TDN1963
Document ID : uuid:a41f2085-fc23-474d-b982-7bb5e27e4b38
Instance ID : uuid:f1592752-9181-40ab-ba81-51d64ee88ca5
Producer : Acrobat Distiller 10.1.4 (Windows)
Page Count : 15
EXIF Metadata provided by EXIF.tools