GuangZhou Walkera Technology DEVO-F7 2.4GHz Transceiver User Manual 08 S29DEVO F7 user manual page 44 51

Download:
Mirror Download [FCC.gov]
Document ID	1892626
Application ID	/8oaDEFXdIIfJ4kBGuXecQ==
Document Description	Users Manual part 4of5
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	218.12kB (2726465 bits)
Date Submitted	2013-02-02 00:00:00
Date Available	2013-02-02 00:00:00
Creation Date	2013-02-01 20:32:00
Producing Software	Acrobat Distiller 10.1.4 (Windows)
Document Lastmod	2013-02-02 09:38:09
Document Title	08_S29DEVO-F7_user_manual page 44-51.pdf
Document Creator	Adobe Illustrator 10.0.3
Document Author:	TDN1963

AeUenlion
DEvcl i=7
Weicume Io use Ole DEVO F7 Iransminer
12) Delta
Press R or L to choose Delta in Wing Type.
Below is the graphics of the servos iocalion of lhe Deita Type.
Lefl Aiieron Right Aiieron
(a) “a" Connect to the oulput AILE in Receiver Connect to the oulput ELEV in Receiver
Press UP or UN to move the cursorato point to V-Teil under v-Taii interieoe There are inhibit and Active,
please choose Active v—taii is unadjustable when the Wing type is Deita
Below is the sketch map or servos' assignment in man:
Lelt empennege Righl empennege
Connect to the eulput ELEV in Reoeiver Connect to the eulput RUDD in Reoeiver
(A) Dual channels setting
Duai Channels can be set as Eievator. Aiieron, Rudder, or Flaperon it is of duai channei output function
The channel, which will be set as duai ohannei at AUX in Device Output (Reler to “2.10 Device Output").
shouid be previousiy set as inhibit when the AUX channel is being set.
Dual Channei setting: Press UP or DN to move the cursor‘lo point to item Duai Channels in the inlerlaoe ol
Wing Type. press R or L, there are items of Eievator. Alieion. Rudder. and Fiap We take Eievator as an exampie.
”W ”W (4 2) Dual Mate Setting
urns lune N my , Press UP or DN to move the cursorsio
a. , mum .
e m” r ‘ n H point to Duai Mate Press R or L to seiect
~~ "’3 ‘ "3"” ‘s ieuavm‘ the desired channel in the menu with lnhibitt
. Duai s Duai nets and the inhibited channeis previously set
E mm" “m in “Device Oulpuf'
The ssltings 0V Aiisron. Rudder and Fiap in the item Channsi are same as above
(4 2) Twin Engine
This lunction can be set as twin engine output to meet the requirmeni lor the models, which are powered by
twin engines.
. _ . unis iu _ Mum rope r e au
Twm Engine selling: Press UP or UN to
move the cursorato point to thn Engine [mi Lil-magnum” Duai Dianne; WWW
Press 3 or L to the desired Icnannei In the mm, mm m‘ new
menu with Inhibit and the Inhibited channels WKZ “UV-2‘
, - a , w s rum : sme . rum gnome
preViousiy set in DeVice Output H “mm , ass,
Piess EXT aflei sening finished
DEVD :77 44
oieUeniion
DEVD F7
Weicorne to use the DEVO F7 transmitter
2.12 PowerAmpli er
The transmission output power or DEVO F7 is adiustable. It is divided into six grades trom low to high. The
lower the transmission output power transmits, the shorter the radio range is, and the longer the standby
time WIiI be, the higher the transmission output power, the rarer the radio range, and the shorter the stand-
by time choose the appropriate transmission output power according to the actual situation
Press ENT to the Main Menu Press UP or DN to move the cursorato point to Model Menu, press ENT to Model
Menu. Press UP or DN to move the cursor»lo point to Power Ampliher, press ENT to Power Ampliher setting intertace.
‘rL-er isiii‘i .i ”ii »« w. a sh;
Press UP or DN to move the cursoreto
MW. ”we, imi point to the desired output power value and
press EMT to contirm The output power
level Will also show on the main menu
intertace see the left Illustration:
2.13 Fixed ID
Using the Fixed ID function allows users to create a unique relationship between transmitter model data and
the corresponding model's receiver It significantly speeds up the binding process and also prevents mistakenly
flying an aircratt with the incorrect transmitter model selected
(1) Fixed ID setup
To start the Fixed ID setup it is important that the transmitter and receiver have successtully oompleted automatic
ID binding process. Once the transmtlterand receiver are paired a Fixed ID can be set as described below:
Press ENT to the Main Menu. Press UP or
DN to move the cursor‘vto point to Model
Menu, press ENT to Model Menu; Press UP ,», s- t. is m
or UN to move the cursorato point to Fixed
ID, press ENT to the Fixed ID setting intertace.
Press R4 or L- to set Status ON, and there
is a Random Fixed ID display on the screen.
Press DN to move the cursor - to point to
ID Code, press ENT to move the cursor «to point to the first code oi the Fixed ID.
Press R+ or L to change the Code, Press DN to move to next Code. Press ENT alter fintshed setting, there
is an ingury ‘Are you sure7 " Press ENT to contirm and execute the binding process After tinished binding
the display will return to the Model Menu automatically
i: M. iii, 4 ., 3t
: fivb i'o 'i re, tax“: n3; ngi . its , re»
no
sin: .is, it,
(2) Cancelling/Resetting the Fixed ID
It you wish to change the receiver Fixed to model back to random in
insert the included BIND PLUG into the output terminal BATT betore
the receiver is powered on. Connect 5v DC power to the Throttle channel
The red LED otthe receiver will tlash slowly Remove the BIND PLUG
The Fixed to code has been cancelled After the receiver‘s Fixed ID is
reset it should also be reset in the Transmitter
M Refer to the instructions of Fixed iD Setting
above ID the foiiowlng Interface. Press UP
to move the Cursor A to pDInHD Slatus ON
When Fixed iD Status ON, press R+ or L
to Change ON ‘0 OFF. Press EXT to exIt
DEVC} F77 45
cieVenlion
DEVCl i=7
Welcome to use the DEVO F7 transmitter
2.14 Sensor Setting
Setting method: Press ENT tn the Main Menu Press UP or UN to move the cursor‘to point to Model Menu.
press ENT to Model Menu: Press UF' or DN to move the Cursorato point to Sensor Setting, press ENT to
Sensor setting interrace.
Press R or L to select Activate or inhibit (the deieult setting is lnhibit), such
as press Activate will includes No Signal Warning, Voltage sensor,
Temperature sensor, GPS receiver setting etc
’ir—risnr - time 1 7n
tbla_ lnlilhtl
sen-eni- ttins 7 2o
me nor roe
. iio . .nal rnlitoit (1)No Signal
ootteeo
Press UP or on to move the cursorato point to No Signal option Press R
or L to choose inhibit or Active (default setting is inhibit ) it you choose
Active, the Radio will alarm when telemetry signal lust See the lelt Illustration:
Vempereture
one Settine
(2) Voltage
There are 3 different types of voltage can be measured lt includes lnlerrlal 5V. External V1 and V2 which
can be monitored two different external voltage(i.e battery) respectively. Once the measured voltage is lower
than the setting value, the Radio will alarm
(2 1) Receiver 5V(|ntemal) PFV(Power Feeding Voltage) Alarmed value can be setted as 3 s—sv
Voltage setting: press DN to move the cursorato point to Voltage otpion on the Sensor setting interrace Then
press ENT to enter the voltage setting intertace Press UP or DN to move the cursorsto point to int 5v option
Press R Dr L to activate the 5V, the alarm interface will appear in the interface, please refer to the illustration
Llnl tase tlnl tase
Int EL rnt so
+ inhibit nature
_ + a n u
Ext l.lt Ext u;
lnlrnhut Inhlhtt
Em
Initmu Inl‘itlut In .ntt
Press UP or DN to select the Alarm Voltage setting option. press R or L to set the value. The range is 3.57
6V You can continue to set other items after you finished
(2 2) v1 External v1
Press UP or DN to move the CUISDrT’tO point to External V1 setting option Press R or L to activate the V1,
the details refers to the illustration
Press UP or UN to move the cursorato ”1:52“ “nilfpsu
point to the Alarm Voltage setting Press $.35? gogive
R or L to set the value The setting range at or > m w; Ext
is 0 2-99 9V. You can continue to set other 0 2 or
items after you finished. E“ "7 inhibit
12.3) External: v2 setting can rererm External
V1 setting. Press EXT to balk to sensor
setting interface to set other options
(3) Temperature sensor
The temperature sensor can measure up to 4 difierent temperatureu e motors) You can choose Celsius or
Fahrenheit The alarmed value can be setted to 4 different temperature Once the measured value is higher
than the setting Value, the radio will alarm The Alarm Temperature Value can be setted as -20~220'C or
4.0-428 0" F.
Temperature Setting: ln the Sensor Setting intertace. press UP or UN to
move the cursorsto point to Temperature Sensor setting option, and press
ENT to Temperature setting intertace. See the illustration , T‘ mm”
(3 1) Unit
Press UP or DN to move the cursor—to point to Unlt setting option, and
press R or L to choose Unit, two kinds or Unit: Celsius and Fahrenheit.
slams
lni‘lrut
DEVD F7748
DEVD P7
Welcome to use the DEVO F7 lransmilter
(3.2) Alarm Temperature settings
Press UP or DN to move the cursoran pornt ta Tl optron, Press R or l. to actrvate the settrng. lnnrbrtwrll change
Io Actlve and Alarm lempereture wlll be shown. It you choose lnhrprt, the Alarm temperature value won l be shown.
Press UP or UN to move the cursor‘lo
mil/L4 _, 'r m) Human-10.”: L J W)
fl J pornt to Alarm settrng, press R or l. to sel
Mr remr the alarm Iemperalure value Press UP or
l1l‘ «er . DN to sel other rtems arterlrnishrng the
setting.
(3 a) T2,T3,T4 setlrng
Refer to lhe step of “Ti "
(4) GPS Selling
There are 4 items lncludlng Allilude Type. Speed UnlL Dale Type and Tlme Zone ln the GPS reeeiver selllng rnteneee.
Setting, Press ENT to the Main Menu. Press UP or DN to move the cursprelo ‘
point to Model Menu. press ENT to Model Menu: Press UP or DN |o move
the cursor-lo pernt to Sensor Settrng. press ENT to Sensor settrng rnterraee. .; 4‘,
Press UP or UN to move the cursor‘vto polnt to GPS Sethng. press ENT
In GPS settrng lnlerface
(4.1) ngrl Type
Press UP or DN Io select the ngn type on the GPS selllng lnlerface and there
are Absolute and Relalive twp lype
lrl? .
y n.)
er.“ l r
tu-
trlr'
(4.2) Speed Unrt
Press UP or DN to select the Speed Umt
on the GPS seltrng lnlerface and rt lncludes
knots and kmlh and relative. Select the
deslred rtem.
(4.3) Date Type
Press UP or DN to select the Date Type on the GPS settrng interrace and it includes DDeMMeYY, MMeDDe
YY and YYeMMeDD Select the deslred rlem.
(nae, stun new a nu, V r...)
(4.4) Trrne Zone
Press UP or DN to select the Tlme Zone.
press R or L to set the desired Tlme Zone.
e l'l 4M: ,hrr. :-
3 0 Functlo Menu
The Function Menu allows you to Customize the selllngs for your saved models Tnls menu lncludes the
lollowing Channel Reverse Swltch, Travel Adjust Sub Trlm, Dual Rate and Exponentlal, Throttle Hold, Throltle
Curve. Dlflerentlal, Balance, Gyro Sensor, Governor. Aileron to Rudder Mix, Elevator to Flap Mlx. Rudd to
Alle/Elevalor. Flap System. Alron to Flap Mlx. Program Mlx, Monitor, Fail Sale. Sensor Vlew.Trainer and Timer.
3.1 Reverse Switch
Press ENT to the Main Menu. Press UP or DN to move the cursor’to polnt to Function Menu, press ENT lo
Funellon Menu; Press UP or DN to move lhe cursor 'Io poml lo Reverse
Swllctl, press ENT to Reverse Swllcrl set‘lng lnteriace l
Press UP or DN to move the cursorT-to point to ELEV(lake Elevator lor
example), Press R or L to srrrll the stalus between nomal and reverse. These
are two stalus loroptron And the default settlng rs Normal All cnannels
Reverse Swilch like Ailerpn, Thrptlle, Rudder, Gean Flap, and Aux2 can
be relerred to the way or ELEV Reverse Swltch And press EXT to exit alter
settrng finished.
\QJTY
lama
new.
(may,
slurrr-r
DEVO F7747
deUenlion
DEVD F7
Welcome to use the DEVO F7 transmitter
3.2 Travel Adjust
Press ENT to the Main Menu. Press UP or DN to move the cursor’to point to Function Menu. press ENT
to Function Menu: Press UP or DN to move the cursor-to point to Travel Adjust, press ENT to Travel Adjust
setting interface. The intertace display a channel's servo travel Value status
rr-auel enlist Travel edit t
Press UP or DN to move the cursor‘Fto
point to “Elevators U” setting (ELEV is used
a. lawn’ ' in the example), press R or L- key, cart
set the travel value while the Elevator
towards up. The adjustment range :0 or
150 0%. Factory default setting: 100 0%.
Eteuatur slaoate
at leron
rhrortle rnrottle
Press UP or UN to move the cursorato polnt to “Elevatol’s D" setting, press R+ or La key. can set the travel
value while the Elevator towards down The adjustment range :0 071so.o% Factory default setting: 100.0%
The settings for all channels. Alleron, Throttle, Rudder, Gear, Flap and AUXZ cart all be set using this process
Press EXT to exit
3.3 Sub Trlm
NOTE: Sub Trim is used to tine tune the servo neutral position during setup In order to avoid pushing the
servo beyond its limits and possibly causing damage it is advised to first mechanically adjust the servo arm/bell
crank to be as close to the neutral point as possible. Only when this is
complete may sub trim be used to make a final adjustment. 'Sur Trult
. mumr
Press ENT to the Main Menu. Press UP or UN to move the Cursor’to point at lewrt
to Function Menu, press ENT to Function Menu; Press UP or DN to move rhmn re
the cursorato point to Sub Trim, press ENT to Sub Trim setting interface Rudder
dear
The interrace display a adjustable channel's name and adjustable data project Press R+ or L- can adjust
the fine tune the servo neutral position Press UP or DN can select the channel you wish to set Every Channel
default setting value is 0.0% The adjustment ranges are as below:
Channel name Adjustment range Channel name Adjustment range
062.5% 
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : TDN1963
Create Date                     : 2013:02:01 20:32:00-08:00
Modify Date                     : 2013:02:02 09:38:09-08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2013:02:02 09:38:09-08:00
Creator Tool                    : Adobe Illustrator 10.0.3
Format                          : application/pdf
Title                           : 08_S29DEVO-F7_user_manual page 44-51.pdf
Creator                         : TDN1963
Document ID                     : uuid:6bf68c52-94f4-4056-ab1c-219400d57c1b
Instance ID                     : uuid:64e2d8e0-d6f4-48f1-ad6e-afbf26f7310a
Producer                        : Acrobat Distiller 10.1.4 (Windows)
Page Count                      : 9

EXIF Metadata provided by EXIF.tools