GuangZhou Walkera Technology WK-2603 RC MODEL PLANE User Manual S29WK 2603 FCCID UserManual

Download:
Mirror Download [FCC.gov]
Document ID	1265315
Application ID	fCjFDoCFvLklTBhciVT3yw==
Document Description	Users Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	215.96kB (2699495 bits)
Date Submitted	2010-04-12 00:00:00
Date Available	2010-04-12 00:00:00
Creation Date	2010-04-12 18:05:42
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2010-04-12 18:05:58
Document Title	S29WK-2603_FCCID_UserManual.pdf
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

\\\\\\\\
walkerc
1421441:
Wflgugfiflg
User Manual
Note: read though the manual before operation and
keep it in a safe place for the future reference.
Part one: General Information
1 .0 Foreword
1.1 Important Statements -------------------------- 1
1.2 Safety Guidelines Needing Attention ——————————————— 1
1.3 Attention before flight .......................... 2
2.0 Features ———————————————————————————————————— 3
2.1 Transmitter WK-2603 ——————————————————————— 3
3.0 Specifications _____________________________ 3
3.1 Transmitter Specification _____________________ 3
3.2 Receiver Specification ....................... 3
4.0 Face --------------------------------------- 4
4.1 Back —————————————————————————————————————— 5
4.2 Wiring Diagram ______________________________ 6
4.3 WK—2603 Input Key Function ____________________ 7
5.0 Control Stick Length Adjustment ............. 7
5.1 Control Stick Tension Adjustment ............... 7
5.2 Neck Strap Usage ............................ 7
5.3 Mechanical throttle switch methods --------------- 3
5.3.1 Right—hand throttle swtiched to _______________ 3
left—hand throttle
5.3.2 Left-hand throttle swtiched to right hand ---------- 9
5.4 Stick Tension Adjustment ---------------------- 10
6.0 Installation Requirements --------------------- 10
Party two: Function Setup
1.0 Main Menu ----------------------------------- 12
2. 0 Swashplate type ______________________________ 12
3. 0 Channel reverse setup -------------------------- 13
4.0 Buzzer setup __________________________________ 15
5.0 Exponential function ........................... 15
5.1 Throttle curve and servo
exponential function ------------------ 15
5.1.1 Adjustment for normal
throttle curve ____________________ 16
5.1.2 Adjustment for stunt throttle curve ................. 16
5.1.3 Adjustment for servo exponential _________________ 15
5.1.4 Compatibility setting for exponential function ---------- 1 7
6.0 PIT adjustment ------------------------------- 17
6.1 PIT adjustment _______________________________ 17
6.2 PLT adjustment ——————————————————————————————— 17
7.0 Adjustment of gyro sensitivity
and rudder mixing -------------------- 18
7.1 Direction adjustment of rudder ___________________ 18
mixing
7.2 Adjustment of gyro sensitivity
and rudder mixing -------------------- 18
7.2.1 Adjustment of gyro sensitivity ---------------- 18
7.2.2 Adjustment of rudder sensitivity ............... 1g
7.3 Dual Rate (D/R) ______________________________ 18
7.4 Throttle limited height switch. .................... 19
8.0 Setting for compatibility ......................... 19
8.1 Flight mode _________________________________ 19
Part one: General Information
1.0 Foreword
The WK-2603 adopts the frequency-hopping spread spectrum 2.4G technology which features automatic code pairing, ID assignment and high
capacity of anti-jamming. it uses the graphic menu which features simple easy—to-read operation.
1.1 Important Statements
(1) The transmitter is suitable for experienced radio controlled helicopter modelers beyond 14 years old.
(2) Flying the model aircraft in approved ground is a must.
(3) We are not responsible for any safety caused by operation, usage or control as soon as the transmitter is sold .
(4) We consign our distributors to offer technical support and service after sale. Please contact the local distributors for problem solutions caused
by usage, operation, maintenance, etc.
1.2 Satety Needing Attention
(1) Far away from obstacle and people
RC helicopter in flight is uncertain of flight speed and status, which potential risk exists in. when flying, please keep your RC helicopter far
away from people, high buildings, high-tension line, etc, and avoid operating in rain, storms, thunder and lightening.
(2) Away from humidity environment
RC helicopter should be kept away from humidity and vapor because it is composed of complicated precise electronic elements and mechanic
parts.
ELTE
(3) Proper operation
Please use Walkera original spare parts to upgrade, modify or maintain your equipment in order to assure its safety. Please operate your
equipment within the range of functions permitted. It is forbidden to use of the safety laws or regulations.
(4) Safety operation
Please fly your equipment according to your body status and flight skills. Fatigue, Iistlessness and miss-operation will increase the possibilities
of accidental hazard.
(5) Away from heat source
The inside of the transmitter is composed of many precise electronic components and mechanical parts. Keep it far away from heat sources
and sunshine to avoid distortion, or even damage caused by high temperature.
(6) Correct Charging Method
It is prohibited to charge the battery by the CHG jack when using a non-rechargeable battery pack.
1.3 Attention before flight
(1) Ensure the battery packs of both transmitter and receiver are fully charged (saturated).
(2) Ensure both the throttle stick and the throttle trim of your transmitter stay at the lowest positions before operation.
(3) Please strictly obey the order of turn—on and turn-off before operation. When starting your flight, turn on your transmitter first, then connect
the battery to the hell. When turning off the hell, disconnect the battery first, then turn off the transmitter. An upset in the order of connection
may cause your helicopter to lose control. Please cultivate a correct habit of turn—on and turn—off.
(4) Ensure the directions and actions of the servos are correct when executing commands of the transmitter. Using a broken servo will result
in unforeseen dangers.
=2
2. 0 Features
2.1 Transmitter WK-2603
1. The WK-2603 adopts 2.4G frequency-hopping spread spectrum technology and features automatic code pairing and ID assignment.
2. Graphic display menu is simple to understand and to set.
3.The appearance design accords with ergonomics and features easy holding. The LCD screen with backlight and graphic interface looks more
personalized.
4. Both the length and tension of the stick can be adjustable. It is convenient to freely switch among the 4 stick modes.
3. 0 Specifications
3.1 Transmitter Specification:
ENCOder --------------- G—channel micro computer system
Frequency --------------------- 2.4G spread spectrum
Output Power -------------------- <10mw or <100mw
Current Drain ___________________ <120mA (at 10mW) or
< 230mA (at 100mW)
Power Source ---------------- 1.2V x 8NiCad(9.6V600mAh)
or 1.5V x 8 AA dry batteries
Output Pulse ----------------- 1050-1850Ms(1500 Neutral)
3.2 Receiver Specification:
Type ----------------------------- Type: 2.4G 7 channel
Sensitivity ................................... 95dbm
Frequency Interval _______________________________ > 4M
Weight ......................................... 10g
Dimension ------------------------- 39 x 235 x 14_5mm
Receiver Battery ————————————————————————— 4.8V 1100mAh
WKDZ7605
Antenna
Neck Strep Eyelet
V’l konb
Gear—52k
Throttle limited '
height switch
V2 konb
gi— Flight Mode SW
ELEV/AILE/RUDD
Elevator Trim Throttle Trim
Elevator / Rudder StiCk Throttle / Aileron stick
Power SW
Rudder Trim
Aileron Trim
UP / DOWN Function Increase / Decrease
Function Key
EXT Function Key
ENT Function Key
LCD
4.1 Back
Charging Jack: Input Voltage: 12V, Current: 50—100mA. Polarity: (9—0—9
It’s only fit for the rechargeable battery pack. Non-rechargeable one is strictly forbidden to use the charge functionl
Analog signals output jack! training jack (DSC): for simulator flight practice via computer (You need a software and its dongle which are available
in hobby stores), and for training.
Carrying Handle
Fixing Scew
Battery Cover
Trainer Jack (Not used) Charging Jack
4.2 Wiring Diagram:
RX2701
Connect to BEC
AUX2
.-
F PIT servo
L-
}- Gear servo
Receiver
Antenna
Rudder servo
—
: Throttle servo / ESC
.-
ill Aileron servo
L—
..
p. Elevator servo
L-
WKaZfilfi
4 3 WK-2603 Input Key Function 5.1 Control Stick Tension Adjustment
_ _ Remove the 6 screws in the back cover of WK—2603, and remove the
EXT: Reset key, press EXT t° ex“ the setting mode. transmitter back cover (Be careful not to break the wires). Then use a
ENT: Enter key, press ENT to enter the setting and Phillips screwdriver to adjust each screw on the throttle arresting spring
confirmation status. for the desired tension (Note: CW rotate to tighten the stick and CCW
. . rotate to loosen .
-UP: Selection key, moves cursor up to the preyious )
function item. Control Stick
Tension
Adjustment Screw
-DN: Selection key, moves cursor down to the next
function item.
+R: Change the setting.
L-: Change the setting.
50 Contr°| StiCk Length Right Throttle Stick Left Throttle Stick
Adjustment
5.2 Neck Strap Usage
The neck strap can be hooked on the face of the WK-2603 transmitter.
_ _ _ The Hook located at the center helps to get optimal balance of the
Shorten the stick length: CW rotate the stick sleeve until the transmitter.
length you hope, and then CW tighten the stick head.
Prolong the stick length: CCW rotate the sitck head until the
length you hope, and then CCW tighten the stick sleeve;
Stick sleeve
Stick head
Neck Strap Eyelet
5.3 Mechanical throttle switch methods
5.3.1 Right-hand throttle swtiched to left-hand throttle
A. The stick position change
Remove the battery pack and the 6 fixing screws in the back of
transmitter, and then remove the transmitter back case (Be careful
not to break the wires inside). Use a Phillips screwdriver to loosen
the linkage screws, screw A, screw B and the throttle arresting spring
in the right throttle position. Then mount them to the corresponding
positions in the left throttle position. Adjust screw A according to the
personal hand feeling (adjust the tension of the throttle stick). Then
install the transmitter back case.
Linkage Screws Linkage Screws
9“ ' ’ ' .
Left Throttle Position
Right Throttle Position
B. The data switch
Press ENT and both STICK MOD and its current status of stick (any
one number from 1 through 4) flashi. That means the setting status is
entered. Press R or L to flash the number 1 or 3 behind STICK MOD.
Press ENT to confirm and exit by pressing EXT.
---- 12.0v STICK MOD1 ---- 12.0v STICK MOD3
ELEV GEAR ELEV GEAR
AILE PIT 100% AILE P” 100%
THRD AUX p THRO AUX P
RUDD BUZZ Z‘ RUDD BUZZ 2]
EXP FLT PITRUDMIX GVTO GGH EXP PLT PITRUDMIX GYTO SCH
l - l l - l l - l l - l
The right-hand throttle includes two modes: MODE 1 and MODE 3;
The left—hand includes another two modes: MODE 2 and MODE 4.
Refer to the following sketch map:
MODE1 MODEZ
Elevator Throttle Throttle Elevator
Rudder<—1—> Aileron<—I—> Rudder<—1—> Aileron<—I—>
MODE3 MODE4
Elevator Throttle Throttle Elevator
Aileron<—i—> Rudder<—I—> Aileron<—1—> Ruling—1.»
The switch from right hand throttle to left is completed and your
WK—2603 is ready for normal flying.
5.3.2 Left-hand throttle swtiched to right hand
A. The stick position change
Remove the battery pack and the 6 fixing screws in the back of
transmitter, and then remove the transmitter back case (Be careful
not to break the wires inside). Use a Phillips screwdriver to loosen
the linkage screws, screw A, screw B and the throttle arresting spring
in the left throttle position. Then mount them to the corresponding
positions in the right throttle position. Adjust screw A according to the
personal hand feeling (adjust the tension of the throttle stick). Then
install the transmitter back case.
Linkage screws
Linkage screws
Screw A
Throttle arresting
[I spring
Screw B
Right Throttle Position Left Throttle Position
B. The data switch
Press ENT and both STICK MOD and its current status of stick (any
one number of 1 through 4) are flashing. That means the setting status
is entered. Press R or L to flash the number 2 or 4 behind STICK MOD.
Press ENT to confirm and exit by pressing EXT.
- .- 12m STICK mooz ---- 12m STICK mom
ELEV GEAR ELEV GEAR
AILE PIT 100% All-E P” 100%
THRO AUX p THRO AUX p
RUDD BUZZ Zl RUDD BUZZ 2]
EXP PLT PITRUDMIX GYTO SCH EXP PLT PITRUDMIX GYTO SCH
l - l l - l l - l l - l
The left-hand includes two modes: MODE 2 and MODE 4; The right-
hand throttle includes another two modes: MODE 1 and MODE 3. Refer
to the following sketch map:
MODE1 MODE2
Elevator Throttle Throttle Elevator
Rudder<—1—> Aileron<—1—> Rudder<—1—> Aileron<—i—>
MODE3 MODE4
Elevator Throttle Throttle Elevator
Aileron<—1—> Rudder<—1—> Aileron<—1—> Rudder<_1_>
The switch from left hand throttle to right is completed and your
WK-2603 is ready for normal flying.
Note: Pay attention to the strength when removing and adjusting the
screws. Excessive strength may damage them.
=,

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2010:04:12 18:05:58+08:00
Create Date                     : 2010:04:12 18:05:42+08:00
Metadata Date                   : 2010:04:12 18:05:58+08:00
Creator Tool                    : PScript5.dll Version 5.2
Format                          : application/pdf
Title                           : S29WK-2603_FCCID_UserManual.pdf
Creator                         : Administrator
Document ID                     : uuid:a9895238-e705-42db-92bd-e05dd6fd61ba
Instance ID                     : uuid:7dcd5951-5947-42bc-8ee0-adda9c332336
Producer                        : Acrobat Distiller 7.0 (Windows)
Page Count                      : 12
Author                          : Administrator

EXIF Metadata provided by EXIF.tools