GuangZhou Walkera Technology WKHM04 R/C Helicopter User Manual Part II
Guangzhou Walkera Technology Co., Ltd. R/C Helicopter Users Manual Part II
Contents
- 1. Users Manual Part I
- 2. Users Manual Part II
Users Manual Part II
@n@@mfiw E 111155 Aviation environment: You need a favorable flying ground. A windlea: spacious outdoor place (a large room without obstacle in proper il'you are experience) shell he an ideal environment. Firstly. switch on the power and push the right control rorl of the transmitter to the lowest place, adjust the awash ptate to the center and the trimmer center. Switch the power of the trencmimr on. 111113 lefleotron gyro of the receiver will be “nested to the heat situation by tie . Make lure that you are at lent 2 meters off the helicopter (with the tall facing you). Puah the right control rod (CHZ) up alowly, apeerl up the main rotary wing lnchmeal until the sliding pry of your helicopter touch the ground gently. At thla time, the helicopter may slide left, which is normal. The helicopter may slide in other directions beside: to left, and it can he aolved by adjust the trimmer. the serve and gyroacope. Push the left control rod trimmer (em) up and down if it alopea forward or backward. the tight control rod trimmer (Cl-ll) left or right if it slope: left or right. and the left control rod trimmer (CH 4) let! or right if the nose turn: left and right. If the sliding to left or right, forward or backward can’t be completely solved with the trimmer. adjust the awingln; arm on the serve to achieve your goal. l Step2 l Be familiar with the function of all kind of control rod. Practice repeatedly until you can operate the helicopter rapidly.(lt is recommended that you master these practices on computer simulator). If you can operate the helicopter to slide on the ground, speed up the main rotary wing slowly and make the helicopter take offthe ground for a short time. it will be better to keep the helicopter not higher than one meter over the ground. lfthe helicopter isuneven jolts, or is out ofcontroi, land the helicopter immediately and make correspondent adjustment until it can hang in the air for a rather long time. Further increase the flight height (Before you take this step, makesure that you have practiced for a long time, and mastered all kinds of operations) to 3 meters over the ground. At this time, thehelicopter will have flew out of its airflow vortex, and the flight will he more steady. If you can make the helicopter hang in the air at any position and hover freely, then you’d make further flying practices. Control you helicopter to hover evenly: change the flight height freely, make the helicopter yaw to left and right with the left control rod (CH4), and move forward and backward with the left control rod (CH2). By doing so, you can make the helicopter 'walk'. Then you can control the helicopter to roll left or right with the right rod (CHJ). And you can also land the helicopter on a given point. Now, your flying level is greatly improved, repeated and patient practices are still required. it is suggested that all difficult operations shall be performed outdoor. You can’t operate in the yard or indoor until you are skillful in the operation. When you fulfilled all the above practices, you have become a qualified pilot. We will improve and upgrade our products. You need to enquire for our latest information and catalogue. dun! usscxlmqn aw as Trsnvrmvx: 2 .,8 W- z: | meacammv 9m DRAGC NFL‘Y
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 7 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:b145f627-9585-497f-b74a-41f96b40a468 Modify Date : 2004:07:08 11:43:39-07:00 Create Date : 2004:07:08 11:43:23-07:00 Metadata Date : 2004:07:08 11:43:39-07:00 Document ID : uuid:d6bbfe86-41c8-4c96-8e16-ebfd34ab12db Format : application/pdf Title : Microsoft Word - BACL modifiedwalker user manual.doc Creator : PScript5.dll Version 5.2 Author : agnesf Producer : Acrobat Distiller 6.0 (Windows)EXIF Metadata provided by EXIF.tools