Guangzhou Chiyuan Electronic HMX50 Quadcopter User Manual

Guangzhou Chiyuan Electronic Co.,Ltd Quadcopter

User manual

Instruction Manual
2ContentsSpecificationsLength: 1.75 in. (45mm) Height: 1 in. (26.5mm) Rotor Diameter: 1.2 in. (31mm) Weight with Baery: .42 oz. (12g) Motors: Coreless Baery: 100mAh 1S 3.7V LiPo Charger: USB LiPo Charger Transmier: 4-channel 2.4GHz
3These instrucons will assist you in geng your Ares Ethos PQ up and running. Please read through these instrucons and follow them carefully.• Keep clear of spinning blades.• Turn transmier and Ethos PQ o when not in use.• Keep all parts away from water.• Not intended for children under 8 years old.• Never y damaged, replace damaged parts prior to ight.• Reduce throle slowly to land. Dropping the Ethos PQ from altude can result in damage to quad.• Always fully charge the baery for longest ight me and best range.• Always recharge with included USB charger plugged into a suitable 5V power source.• When replacing a broken prop make sure to use one with the correct rotaon. (See diagram)Cautions
4AAAARemove rear cover and install 2-AA baeriesTransmitter BatteriesCharging Flight BatteryCharging Port Power SwitchSlide Switch to Le to Turn ONPlug charging cord into charge port on rear of quad and into a USB port. Charge me = 30min.
5Rate Switch Flip SwitchAileron TrimAileron/ElevatorElevator TrimPower LEDThrole/RudderOFF ONRate Switch1 Beep = Low Rate2 Beeps= Mid Rate3 Beeps= High RateFlip SwitchPress and hold buon, then move ai-leron sck in the direcon you want the quad to ip. Transmitter DetailsSet quad on level surface and leave unl blinking LED’s become steadyTurn on transmier first then quad
6UPDOWNUPDOWNFlight ControlsThrole Sck
7Yaw Le Yaw RightYaw RightYaw LeRudder Sck
8Move LeMove RightMove Le Move RightAileron Sck
9ForwardBackwardForwardBackwardElevator Sck
10CABDCorrect Prop Locaonand RotaonAZSH1500 Ethos PQ RTF Quad AZSH1503 100mAh 1-Cell/1S 3.7V LiPo Ba. (2) AZSH1504 USB Charging Cord AZSH1509 Motor Mount w/Landing Pad (4) AZSH1513 Clockwise Motor (2) AZSH1514 Counter-Clockwise Motor (2) AZSH1518 Propeller Set (2 Black/2 White) AZSH1521R Body/Canopy Red AZSH1521B Body/Canopy BlueReplacement PartsProp Replacement
11AZSH1521AZSH1503AZSH1518AZSH1514AZSH1513AZSH1509Exploded View
1230-Day Limited Warranty Term Period:We warranty that the Product(s) purchased (the “Product”) will be free from de-fects in materials and work manship when the product is new (before being used) for the limited warranty term period, 30 days, from the date of purchase by the Purchaser. If you believe a defect in material, workmanship, etc. was not apparent when the Product was new and only became evident after the Product was used, take the following steps. If you purchased the Product at a HobbyTown store, please contact your local HobbyTown store for warranty support and/or service. If you purchased the Product from the Firelands website, use the contact information found under the Support heading to contact Firelands directly. If you contact Firelands, you may be asked to send the product to Firelands, at your cost, for inspection. Provided the warranty conditions have been met within the warranty term period, the components that are found to be defective, incorrectly manufactured or assembled may be repaired or replaced, at the sole discretion of Firelands. Your warranty item will be returned to you at Firelands’ expense. If you purchased your Product from a HobbyTown Internet site not afliated with a local store, please consult that site for its support and service policies. You can also nd more information at:www.Hobbytown.comor by emailing customerservice@relandsgroup.com or call 800-205-6773
FCC Statement:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu