Guangzhou Chiyuan Electronic N-6 Stick Radio Control User Manual N 6 2 4G

Download:
Mirror Download [FCC.gov]
Document ID	1233711
Application ID	I6NxPVwDDY/ORCb1yddf/A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.85kB (223083 bits)
Date Submitted	2010-01-28 00:00:00
Date Available	2010-01-28 00:00:00
Creation Date	2010-01-23 16:19:39
Producing Software	Corel PDF Engine Version 1.0.0.525
Document Lastmod	2010-01-23 16:19:39
Document Title	N-6 2.4G操作说明.cdr
Document Creator	CorelDRAW 12.0 版
Document Author:	番茄花园

2.4G DSSS Technology
1. Press and hold the bind button on the back of the transmitter while
Turning on the power switch,until LED normally displays.
N-6
Receiver channel mixing
Transmitter
2.4G Binding
Stick
Aileron Stick
Elevator Sticker
Ch2
Ch1
+50%
+50%
+50%
-50%
6-Channel 2.4G Radio Control System
INSTRUCTION MANUAL
Connection Diagram(For FIXED-WING)
Power sw(turn on )
Thank you for purchasing our R/C system.
Before using, read this manual carefully.
BIND(Press and hold )
Antenna
Handle
CH5
Ch6
LED
Left Stick
Right Stick
Power Switch
Reverse SW
Mode SW
Bind SW
3. LED(Xy600) should be go solid,
indicating the system has
connected.
Now remove the bind plug and
disconnect the battery.
LIGHT
Charging Jack
CAUTION
! To work your R/C with your models correctly and safely, read this
manual carefully and keep it in a safe way as a reference introduction in the
future.
Warning:
1. This product is only equipped for radio controlled models;
2. The usage of this product should be approved by local relevant law or
regulations;
3. We will not be responsible for the damages caused by unauthorized
modification, adjustment or replacement of parts of this product;
4. The manual may be altered without prior notice. Please contact us if
you have any corrections or clarifications that should be made in the manual..
! Before starting the transmitter, make sure the transmitter batteries are
well loaded .The voltage of transmitter batteries is never lower than 8.6V. And
please check and confirm that the servos are all well and properly connected.
! Keep the radio system away from moist, high temperature and strong
shake. Do not clean the product with solvent.
! The antenna does not touch anything else when power switch is turned
on. Do not leave this product and its accessories within the reach of small
children.
! Please use this product according to your local relevant law or
regulation, we are not responsible for any incidents or damages.
Swi tch1
Reverse
Aileron
Reverse
Swi tch2
Elevator
Re verse
Transmitter
(Mode 1)
RUDD
LEFT STICK
Swi tch3 Swi tch4
Swi tch5
Throttle
Reverse
Mode1 Fixed-Wing
Delta
Mode2
Rudder
Reverse
Channel 6
Ch6
CH5
Ch4
CH3
CH2
CH1
Xy600
ELEV
Xy600
Plane select SW
Swi tch
2. With the system hooked up as
shown, insert the bind plug in the
charge plug receptacle.Turn on the
power of the receiver (4.8~5.6v),
and now LED(xy600) should be
flashing indicating
that the
receiver is ready to bind.
FLASH
(Fixed-Wing & Delta)
! Switch to “FIXED-WING” position and enter Fixed-Wing Plane mode,
aileron and elevator is mixed, as for triangle planes, tailless planes.
THRO
AILE
RIGHT STICK
Channel 5
RUDD
ESC
ELEV
AILE(BIND)
Swi tch6
Servo5
Servo4
Servo3
Motor
Servo2
Servo1
Receiver channel distribution:
Ch1: Aileron
Ch2: Elevator
Ch3: Throttle
Ch4: Rudder
Ch5: Flap
CH6: AUX
Technology Data
Xy600
Connection Diagram(For DELTA)
Swi tch
Swi tch1
Swi tch2
Swi tch3 Swi tch4
Swi tch5
Reverse
Aileron
Reverse
Elevator
Re verse
Throttle
Reverse
Mode1 Fixed-Wing
Delta
Mode2
Rudder
Reverse
Swi tch6
! Receiver channel distribution:
CH1: Aileron ; CH2: Elevator ; CH3: Throttle ; CH4: Rudder; Ch5: Flap ;
CH6: AUX
! Switch to “DELTA” position and enter DELTA mode,
elevator is mixed, as for triangle planes, tailless planes.
aileron and
Transmitter
Type: N-6
Channels: 6
Frequency: 2.4G
DC: 9.6V,≤250mA
Meas.: 210*190*85mm
(Packing meas.）
Net weight: 390g
Receiver
Type: XY600
Channels: 6
Frequency: 2.4G
DC: 4.8~5.6V,≤40mA
Net weight: 13.5g
Output Power: ≤20dBm
Modulation: DSSS
Frequency Range: 2403MHz-2480MHz
Number of channels: 78 (Randomly selected)
Antenna Parameters: Gain(3dBi)/ VSWR(≤1.5)/ Impedance(50ohm)
Changes or modifications not expressly approved by the party responsible for compliance
could void the user authority to operate the equipment.
FCC ID:V6KN-6
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1)this device may not cause harmful interference, and(2)this device must accept
any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 1
Create Date                     : D:20100123161939
Modify Date                     : D:20100123161939
Producer                        : Corel PDF Engine Version 1.0.0.525
Author                          : 番茄花园
Creator                         : CorelDRAW 12.0 版
Title                           : N-6 2.4G操作说明.cdr

EXIF Metadata provided by EXIF.tools