Guangzhou Chiyuan Electronic N-8C Radio Control System User Manual N 8C Introduction Manual

Download:
Mirror Download [FCC.gov]
Document ID	814909
Application ID	j2kb1EipFFZ9x5iEc/krNQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	142.31kB (1778903 bits)
Date Submitted	2007-07-12 00:00:00
Date Available	2007-07-12 00:00:00
Creation Date	2007-06-22 09:13:04
Producing Software	Corel PDF Engine Version 1.0.0.525
Document Lastmod	2007-06-22 09:13:04
Document Title	N-8C Introduction Manual.cdr
Document Creator	CorelDRAW 12.0 版
Document Author:	fxzm

T O PCARE
8 Channel PPM/FM Radio Control System
Introduction Manual
Thank you for purchasing our‘T O PCA RE’R/C system.
Before using, read this manual carefully.
Guangzhou Chiyuan Electronic Co., Ltd
Add: 2/F., No. 1 Bldg., Boyi Industrial Garden, 4th Gongye Rd.
Zhicun, Dashi Street, Panyu Dis., Guangzhou, China
P.C.: 511430
Tel: +86-20-34796226;34797226
Fax: +86-20-34796116
Website: www.chiyuan.net
E-mail: gzchiyuan@126.com
CCPM
RADIO CONTROL SYSTEM
N-8C R/C
Table of Contents
Caution ....................................................................................................
1.1 N-8C Transmitter Chart .....................................................................
2.1 Menu ..................................................................................................
2.2 Function List ......................................................................................
2.3 D/R & EXP ........................................................................................
2.4 Rev. SW .............................................................................................
2.5 Sub Trim ............................................................................................
2.6 Trvl ADJ. ...........................................................................................
2.7 Swash TYP..........................................................................................
2.8 Swash Mix .........................................................................................
2.9 Stick Mode ........................................................................................
2.10 Thro Curv ........................................................................................
2.11 Pit Curv ............................................................................................
2.12 Planes ...............................................................................................
2.13 Clear .................................................................................................
2.14 Gyro Sens ........................................................................................
2.15 Idel Thro ..........................................................................................
2.16 Idel Pith ...........................................................................................
2.17 Plane Type .......................................................................................
3.1 Upright Operation of Left Stick and Movement of Elevator ..........
3.2 Level Operation of Left Stick and Movement of Rudder ...............
3.3 Upright Operation of Right Stick and Movement of Throttle .........
3.4 Level Operation of Right Stick and Movement of Aileron .............
4.1 Back of Transmitter .........................................................................
4. 2 Trainer Function ..............................................................................
5.1 Control Stick Length&Tension Adjustment ....................................
5.2 Loading Batteries ............................................................................
6.1 Three-servo Connection Diagram ...................................................
6.2 Two-servo Connection Diagram ......................................................
6.3 Four-servo Connection Diagram .....................................................
6.4 ACRO Connection Diagram ............................................................
6.5 V-tail Mixing Connection ................................................................
R/C Introduction Manual
R/C Introduction Manual
10
10
11
12
13
13
14
15
15
16
17
18
19
20
21
22
Caution
To work your R/C with your models correctly and safely, read this manual
carefully and keep it in a safe way as a reference introduction in the future.
Warning:
1. This product is only equipped for radio controlled models;
2. The usage of this product should be approved by local relevant law or
regulations;
3. We will be not responsible for the damages caused by unauthorized
modification,adjustment or replacement of parts of this product;
4. The manual may be altered without prior notice. Please contact us if you have
any corrections or clarifications that should be made in the manual.
1.1 N-8C Transmitter 1.1
ChartN-8c功 能 示意图
Antenna
Goyr. Sens.
Adj. SW
Before starting the transmitter, make sure the transmitter batteries are well loaded
.The voltage of transmitter batteries never be lower than 8.6V. And please check
and confirm that the servos are all well and properly connected.
Please take off batteries from transmitter after flying and during the
transportation.
Idel. SW
Trainer SW
Elev. D/R SW
Please pay more attention on the parts in this manual, which marked with
“warning”.
! Because of disturbance, do not work your radio control system simultaneously
with others at the same frequency.
Handle
Aile. D/R SW
Pit Adj. SW
Thro.Hold SW
Right Stick
Left Stick
Eyelet
Input Keys
LCD
Charging Jack
Power SW
Please check and have a test on control surfaces to confirm the transmitter
handling of each part prior to each takeoff. The frequencies of the module and
the receiver should be the same.
The instructor and the student transmitters must accord with each other when
using trainer function.
Keep the radio system away from moist, high temperature and strong shake. Do
not clean the product with solvent.
Ok/Return
Do not fly your models near airfield, schools, hospitals, residences, power
transmission network, communication facilities and other places that are
forbidden for starting the transmitter. Please stop flying your models with the
radio on rainy or windy days, or at night.
Increase
Do not fly the models when you are tired, sick , intoxicated,or not in good spirit.
The antenna do not touch anything else when power switch is turned on. Do not
leave this product and its accessories within the reach of small children.
Up
Decrease
Down
Press “OK/Return” to entry the main menu. (“OK/Return” here in after refered to as“
”)
Please use this product according to your local relevant law or regulation,we are
not responsible for any incidents or damages.
Important Comments: All USB ports in this transmitter are just used for our
special cord with its USB structure and without USB agreement. DO NOT USE
your USB cables with transmitter.
Press “Up ” and “Down ” for selecting functions in the list; press“ ” to enter the
selected function; press “ ”to return to the previous menu.(“Up ” here in after refered to
as“ ”;“Down ” here in after refered to as“ ”)
Press “Increase ”and “Decrease ”to change input data.(“Increase ” here in after refered to
as“ ”;“Decrease” here in after refered to as“ ”)
R/C Introduction Manual
R/C Introduction Manual
2.3 D/R & EXP
2.1 Menu
T O PCA RE
Modulation Type
Model Type
PPM/FM
[D/R&EXP]
[D/R&EXP]
[D/R&EXP]
ELEV
Pos0
79%
D/R
LIN
ELEV
Pos1
42%
D/R
LIN
AILE
Pos0
79%
D/R
LIN
AILE
Pos1
42%
D/R
LIN
(2.3.1)
11.5v
8 Channel R/C
U:
Channel Type
[D/R&EXP]
Voltage
Function
Dual rates are available for elevator and rudder channels of RC helicopters.
Operation
1. Press “ ” to entry the menu – Roll“ ” or “ ”select the function (D/R & Exp) in
the list Press “ ” to set the function and return to the previous menu.
2. Roll “ ” or “ ” to select ELEV and AILE to set the data.
3. ELEV setting ---- ‘ELEV’ is displayed
Once the Elevator D/R switch is on/up, the data displayed is ‘Pos 0’. Use “ ” or “
”
to increase or decrease the data.(2.3.1)
Once the Elevator D/R switch is off/down, the data displayed is ‘Pos 1’. Use “ ” or “ ”
to increase or decrease the data.(2.3.2)
4. AILE setting ---- ‘AILE” is displayed
Once the Aileron D/R switch is on/up, the data displayed is ‘Pos 0’. Use “ ” or “ ” to
increase or decrease the data. (2.3.3)
Once the Aileron D/R switch is off/down, the data displayed is ‘Pos 1’. Use “ ” or “ ”
to increase or decrease the data. (2.3.4)
5.Press “ ” to save and return to the previous menu.
2.2 Function List
Dual Rate
Reversing Switch
Sub Trim
Travel Adjustment
Swash Mixing
Swash Type
Stick Mode
Throttle Curve
PIT. Curve
Planes
Clear
Gyro Sensitivity
Idle Throttle
Idle Pitch
PLANE TYPE
Exit
R/C Introduction Manual
(2.3.4)
(2.3.3)
It is a default setting of helicopter in Model Type initially.
When the voltage displayed is 8.6V below, the number will be flashed and simultaneously
with warning.
"[FUNC.LIST]"
" D/R & EXP"
" Rev. SW"
" Sub Trim"
" Trvl ADJ."
" Swash Mix"
" Swash TYP"
" Stick Mode"
" Thro Curv"
" Pit Curv"
" Planes"
" Clear"
" Gyro Sens"
" Idel Thro"
" Idel Pith"
"PLANE TYPE"
" Exit"
(2.3.2)
2.4
Rev. SW
[REV.SW]
[REV.SW]
[REV.SW]
THRO
CH 1 2 3 4 5 6 7 8
ELEV
CH 1 2 3 4 5 6 7 8
AUX3
CH 1 2 3 4 5 6 7 8
Function
The Reverse switch is to change the servo for channel direction.
Operation
1.Select ‘REV. SW’ and entry the interface.
2.Use “ ” or “ ” to select the channel arrow position. Press “
channel; press “ ” to the normal status.
3.Press“ ” to save and return to the previous menu.
R/C Introduction Manual
” to reverse the
2.5
Sub Trim
[Sub.Trim ]
[Sub.Trim ]
ELEV
-19%
THRO
-13%
AILE
-20%
2.7 Swash TYP
RUDD
+10%
GEAR
-18%
PITH
- 3%
[SWASH TYP]
FLAP
+ 8%
[SWASH TYP]
[SWASH TYP]
180
CP MOD
120
[SWASH TYP]
90
3Servos
CCPM
2Servos
CCPM
AUX3
+10%
4Servos
CCPM
(2.5.2)
(2.5.1)
Function
The Sub trim is a trim position setting on 8 channels.
Operation
1.Select ‘Sub Trim’ and entry the interface.
2.Use “ ” or “ ” to select the channel arrow position. Press “ ” or “ ” to change
the data.(2.5.1)
3.Use “ ” or “ ”to display circularly the other channels below. Press “ ” or
“ ” to change the data. (2.5.2)
4.Press “ ” to save and return to the previous menu.
Function
This function is to select a Swash type.
Operation
SWASH TYP
1.Select ‘SWASH
TYP’ and entry the interface.
2.Use “ ” or “ ” to select the mode: CP mode/2Servos/3Servos/4Servos.
3.Press “ ” to save and return to the previous menu.
2.8 Swash Mix
2.6 Trvl ADJ.
[SWASH MIX]
On1
Ser
[TRVL ADJ.]
[TRVL ADJ.]
THRO
-13%
ELEV
-19%
GEAR
-18%
FLAP
+ 8%
AILE
-20%
RUDD
+10%
PITH
- 3%
AUX3
+10%
(2.6.1)
(2.6.2)
Function
The function is an electronic means to adjust the servo travel value.
Operation
1.Select ‘TRVL ADJ.’ and entry the interface.
2.Use “ ” or “ ” to select the channel arrow position. Press “ ” or “ ” to change
the data.(2.6.1)
3.Use “ ” or “ ”to display circularly the other channels below. Press “ ” or
“ ” to change the data. (2.6.2)
4.Press “ ” to save and return to the previous menu.
R/C Introduction Manual
one
os
[SWASH MIX]
[SWASH MIX]
[SWASH Mix]
2Servos
3Servos
4Servos
180
AI
PI
EL
+50%
+50%
+50%
120
AI +50%
PI +50%
EL +50%
90
AI
PI
EL
+50%
+50%
+50%
Function
This function is to set the swash mixing data.
Operation
1.Select ‘SWASH MIX’ and entry the interface.
2.Use “ ” or “ ” to select the channel arrow position. Press “ ” or “ ” to set the
mixing data between the Travel value and the Throttle.
3.Press “ ” to save and return to the previous menu.
Notes: Please set the ‘Swash TYP’ before entering the Swash Mix.(cp mode;2Servos;
3Servos;4Servos;)
R/C Introduction Manual
2.9 Stick Mode
2.11 Pit Curv
[STICK MODE]
[STICK MODE]
MODE 1
MODE 2
RIGHT STICK
LEFT STICK
[PIT. CURV]
[PIT. CURV]
L:
Function
This function allows you to exchange mode 1 and mode 2.
Operation
1.Select ‘STICK MODE’ and entry the interface.
2.Use “ ” or “ ” to select the mode.
3.Press “ ” to save and return to the previous menu.
Notes: To change the mode, it is necessary to remove the model of the transmitter.
[PIT. CURV]
H:
100
1:
25
Function
This radio offers 2 separate pitch curves with 5 adjustable points per curve: L/1/2/3/H.
Operation
1.Select ‘PIT.
PIT. CURV’
CURV and entry the interface.
2.Use “ ” or “ ” to select any point at arrow that is in need to reset the data. Press “
” or “ ” to set the data separately as the curve is being changed accordingly.
3.Press “ ” to save and return to the previous menu.
2.12 Planes
2.10 Thro Curv
[Planes]
[Planes]
[Planes]
[THRO CURV]
L:
[THRO CURV]
[THRO CURV]
H:
100
1:
25
Function
This radio offers 2 separate throttle curves with 5 adjustable points per curve: L/1/2/3/H.
Operation
1.Select ‘THRO CURV’ and entry the interface.
2.Use “ ” or “ ” to select any point at arrow that is in need to reset the data. Press “
” or “ ” to set the data separately as the curve is being changed accordingly.
3.Press “ ” to save and return to the previous menu.
R/C Introduction Manual
Function
This radio has a memory for 6 models with their data individually.
Operation
1.Select ‘PlANES’ and entry the interface.
2.Use “ ” or “ ” to select the model memorized with a code.
3..Press “ ” to save and return to the previous menu.
R/C Introduction Manual
2.15 Idel Thro
2.13 Clear
Reset or no?
[Y]
[IDEL THRO]
[Clear]
[Clear]
[N]
(2.13.1)
L:
Reset or no?
[Y]
[N]
[IDEL THRO]
[IDEL THRO]
H:
100
1:
25
(2.13.2)
Function
This function helps with returning the factory preset.
Operation
1.Select ‘CLEAR’ and entry the interface.
[Y] and [N] are displayed.
[Y] is to return the factory preset;(2.13.1)
[N] is not to return the factory preset. (2.13.2)
2.Use “ ” or “ ” to select the answer.
3.Press “ ” to save and return to the previous menu.
Function
This function is a possibility to adjust the throttle curve with 5 points in 3D mode.
Operation
1.Select ‘IDEL
IDEL THRO’
THRO and entry the interface.
2.Use “ ” or “ ” to select any point at arrow that is in need to reset the data. Press “
” or “ ” to set the data separately as the curve is being changed accordingly.
3.Press “ ” to save and return to the previous menu.
2.16 Idel Pith
2.14 Gyro Sens
[IDEL PITH]
[GYRO SENS]
[GYRO SENS]
Pos0
20%
Pos0
20%
Pos1
80%
Pos1
80%
(2.14.1)
(2.14.2)
Function
This function offers a gyro adjustment with 2 points.
Operation
1.Select ‘GYRO SENS’ and entry the interface.
2.Once ‘the Gyro Sensitivity Adjustment SW’ is off/down, the data displayed is ‘Pos 0’.
Use “ ” or “ ” to adjust the data.
Once ‘the Gyro Sensitivity Adjustment SW’ is on/up, the data displayed is ‘Pos 1’. Use “
” or “ ” to adjust the data.
3.Press “ ” to save and return to the previous menu.
L:
R/C Introduction Manual
[IDEL PITH]
[IDEL PITH]
H:
100
1:
25
Function
This function is a possibility to adjust the pitch curve with 5 points in 3D mode.
Operation
IDEL PITH’
PITH and entry the interface.
1.Select ‘IDEL
2.Use “ ” or “ ” to select any point at arrow that is in need to reset the data. Press “
” or “ ” to set the data separately as the curve is being changed accordingly.
3.Press “ ” to save and return to the previous menu.
R/C Introduction Manual
10
3. Transmitter Operation and Movement (for Airplane)
2.17
PLANE TYPE
[SWASH TYP]
CP MOD
[ PLANE TYPE ]
Airplane
3D Mix
V-Tail Mix
[ PLANE TYPE ]
Airplane
3D Mix
V-Tail Mix
[ PLANE TYPE ]
Airplane
3D Mix
V-Tail Mix
This chapter will introduce transmitter’s stick operation and movement of each servo
of aeroplane, including stick operation and movements of Elevator, Rudder, Throttle,
Aileron. (Mode 1)
3.1 Upright Operation of Left Stick and Movement of Elevator
Function
This function is loaded with airplane and helicopter programming.
Operation
1.Select “SWASH TYP” and entry the interface of "CP MOD”.
2.Entry “PLANE TYPE”.
3.Use “ ” or “ ” to select the model type.
4..Press “ ” to save and return to the previous menu.
Elevator
! Swash Adjustment
1. Turn on the transmitter. Press Select keys to enter the Swash Type and select swash
type you want.
ModeⅠ
2. Open the horns of swash plate servos.
Elevator
Plane
3. Move the throttle stick(engine turned on) to observe the circumvolving direction of the
servos horn. By reverse, you can adjust the direction.
L Stick
Downwards
L Stick
Upwards
4. Press Select keys to enter the Sub Trim and return all values to zero.
5. Lock the servos' horns.
6. Observe the circumvolving direction of the swash plate by moving aileron and elevator.
Change it by adjusting the value of aileron and elevator in Swash Mix list.
L e f t St i c k Ve r t a i c a l Op e r a t i o n
7. Gyro Adjustment------Press Select keys to enter the Gyro Sensor and adjust the value you
want by O/I switch.
8. Finished all of the above, you can fly your helicopter freely.
11
R/C Introduction Manual
R/C Introduction Manual
12
3.2 Level Operation of Left Stick and Movement of Rudder
3.4 Level Operation of Right Stick and Movement of Aileron
R Aileron
Rudder
L Aileron
ModeⅠ
Plane
Rudder
L Stick
Rightwards
L Stick
Leftwards
(ModeⅠ)
Left Stick Horizontal Operation
3.3 Upright Operation of Right Stick and Movement of Throttle
ModeⅠ
Right
Left
Aileron Aileron
Plane
R Stick
Rightwards
R Stick
Leftwards
Right Stick Horizontal Op e r a t i o n
Motor
Plane
R Stick
Downwards
Decelerating
Decelerating
R Stick
Upwards
Accelerating
Accelerating
Right Stick Vert a i c a l Operation
13
R/C Introduction Manual
R/C Introduction Manual
14
5. Installation and Adjustment
4.1
Back of Transmitter
This chapter will introduce the installation and adjustment of some important parts of
transmitter, including Control Stick Length and Tension Adjustment, Loading
Batteries, Loading Module and Connection between Receiver and Servos.
Module
Trainer
Battery Cover
4. 2 Trainer Function
5.1 Control Stick Length&Tension Adjustment
Low Cap
Connect the student and the instructor transmitters with the trainer cord. Confirm
the connection is OK.
The instructor transmitter is used as a normal setting; Turn down the student
transmitter and take off its Replaceable Module and batteries. (Do not extend
the antenna of student transmitter)
15
When the trainer switch of the instructor is pushed, like the following
illustration, the model can be controlled by student. When the trainer switch of
instructor returns, the model is under instructor's control.
For your convenient operation, the stick length
can be adjusted as your demand.
Screw the high cap anticlockwise to the desired
length and then, screw the low cap anticlockwise
to lock the high cap as the left illustration.
For your convenient operation, the stick tension
can be adjusted as your demand.
Use the screwdriver to adjust the screw clockwise
for the desired tension. anticlockwise to loosen
stick feel, clockwise to tighten stick feel.
This adjustment need take off the back cover of
transmitter.
High Cap
The training function is only active with T-1 trainer cord.
R/C Introduction Manual
R/C Introduction Manual
16
6.1 Three-servo Connection Diagram
5.2 Loading Batteries
(AILE.)
Front
(ELEV.)
5.2.1
(PITCH)
图
4.3.1
Open the battery cover in the direction of the arrow while pressing the non-slip
cover grips.
Load the batteries in accordance with the battery holder polarity marking and
close the battery cover.(5.2.1)
Servo 4
Servo 3
RUDD.
Gyro
Receiver
Power
Ch8
CH7
CH6
CH5
CH4
CH3
CH2
CH1
PITCH
ELEV.
AILE.
Electronic
Speed
Controller
Servo 1
Servo 2
Motor
17
R/C Introduction Manual
R/C Introduction Manual
18
6.3 Four-servo Connection Diagram
6.2 Two-servo Connection Diagram
(AILE.)
(AILE.)
Front
Front
(ELEV.)
(AUX3)
(ELEV.)
(PITCH)
Servo 3
Servo 4
Servo 5
AUX3
RUDD.
RUDD.
Gyro
Gyro
Receiver
Power
Ch8
CH7
CH6
CH5
CH4
CH3
CH2
CH1
Receiver
ELEV.
AILE.
Electronic
Speed
Controller
Power
Servo 1
Motor
19
R/C Introduction Manual
Servo 3
Ch8
CH7
CH6
CH5
CH4
CH3
CH2
CH1
PITCH
ELEV.
AILE.
Electronic
Speed
Controller
Servo 1
Servo 2
Servo 2
Motor
R/C Introduction Manual
20
6.5 V-tail Mixing Connection
6.4 ACRO Connection Diagram
Ch4
Ch2
Ch6
Ch3
Ch6
Ch2
Servo 4
Receiver
Power
Ch8
CH7
CH6
CH5
CH4
CH3
CH2
CH1
Electronic
Speed
Controller
Motor
R/C Introduction Manual
Servo 2
Receiver
Power
Servo 1
21
Servo 3
Ch8
CH7
CH6
CH5
CH4
CH3
CH2
CH1
Electronic
Speed
Controller
Servo 2
Servo 1
Motor
R/C Introduction Manual
22

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 13
Create Date                     : D:20070622091304
Modify Date                     : D:20070622091304
Producer                        : Corel PDF Engine Version 1.0.0.525
Author                          : fxzm
Creator                         : CorelDRAW 12.0 版
Title                           : N-8C Introduction  Manual.cdr

EXIF Metadata provided by EXIF.tools