Guangzhou EHang Intelligent Technology GVR-200B VR GOGGLES User Manual
Guangzhou EHang Intelligent Technology Co., Ltd. VR GOGGLES
User Manual
Modelďź GVRâ200BďźBluetooth+2.4GHz data transmission+5.8GHz video transmission,the 5.8G is receive onlyďź GVRâ200WďźWIFI+2.4GHz data transmission+5.8GHz video transmission,the 5.8G is receive onlyďź English Disclaimer Before using EHang VR goggles, please read the operating manual carefully and familiarize yourself with the operations, warnings and applications. Please avoid improperly installing antennas, using non-proprietary charger or gimbal. EHang shall not bear any liability or responsibility of the damage of the VR goggles, the gimbal, the camera, the copter or any other related accessories or the accidents arised from improper use. Introduction The Ehang VR goggles feature data and real-time video transmission functions. While wearing the goggles, users can easily see real-time videos through head tracking system as well as adjusting pitch angles of the camera which is attached on GHOSTDRONE 2.0. Packing List VR GogglesĂ1 5.8G AntennaĂ1 2.4G AntennaĂ1 USB CableĂ1 VR Goggles Carry CaseĂ1 Goggles Cleaning ClothĂ1 Diagram Ĺ Ĺ Ĺ Ĺ Ĺ MENU Ĺ Ĺ VIEW SWITCH VISION DATA POWER CHANNEL SEARCH 5.8G 2.4G Ĺ Ĺ Ĺ Above Menu Up Down 5.8G Antenna Interface Ĺ Ĺ Ĺ Ĺ Vision Signal Data Signal Power Indicator Copter/ Front Camera Ĺ Channel Search Ĺ ON/OFF 2.4G Antenna Interface Binocular Display Screen Back USB / Charging Portal AV OUT AV Output USB Ĺ Ĺ Ĺ Ĺ Bottom Specifications Communication Bluetooth /Wi-Fi + 2.4 GHz data transmission + 5.8 GHz video transmission Weight 255 g Power 4.5 W Charging Voltage DC 5 V Battery 3.7 V 1700 mAh Image Size 854*480 Interpupillary Distance 63 mm Battery Life about 60 min Charging the Goggles Please use the Ehang USB cable for charging. It takes about 3 hours to fully charge the goggles. When charging through a USB adapter, the required input current is 500 mA or higher. USB AV OUT Bottom Charging the VR goggles with Ehang power adapter Note: VR goggles can also be charged with Ehang power adapter for GHOST Drone 2.0. The VR goggles and smart flight battery can also be charged with the power adapter at the same time. Power Indicator Status: Charging: Slow Flas hing Fully Charged: Off MENU VIEW SWITCH VISION DATA POWER CHANNEL SEARCH 5.8G 2.4G Instructions 1. Install 5.8GHz antenna and 2.4GHz antenna to the corresponding antenna interfaces; 2.4G antenna 5.8G antenna 2. 2.Press and hold the power button to turn the VR goggles on. Power indicator displays solid red. Data signal indicator flashes blue. Press and hold MENU VIEW SWITCH VISION DATA POWER CHANNEL SEARCH 5.8G 2.4G 3. Bluetooth / Wi-Fi Connection 1) Android version: Launch the App to search for the Bluetooth connection. Once the connection is established, the Data signal indicator will display solid blue. 2) iOS version: Turn the iPhoneâs Wi-Fi on in system stettingâs. Once the Wi-Fi connection is established, launch the App, then the Data signal indicator will display solid blue and confirm Wi-Fi connection in App. The password for goggleâs Wi-Fi is on the sticker on the bottom of the VR goggle. Android: iOS: 4. Tap âBindâ in the App, then turn on the Ghost Drone 2.0, the data will appear on the App interface once binded successfully. 5. Press Channel Search button to automatically search for the right channel. The vision signal indicator will turn solid green from flashing when connection is successfully established. Note: If the image is not clear enough, press CHANNEL SEARCH button to search again for a clearer image. There are 32 channels on the VR goggles and the first channel to pop up might not be the best so keep searching. Press CHANNEL SEARCH MENU VIEW SWITCH VISION DATA POWER CHANNEL SEARCH 5.8G 2.4G 6. Choose âGogglesâ in settings in App before flight. You can control the cameraâ s pitch by moving your head up and down when this option is checked. The horizontal of the gimbal can be controlled by using the slide bar shown in the App. 7. Put on the VR goggles looking up or down. Controlling horizontal of the gimbal by this slide bar. 鼰꾡ĺˇä N N LNI ç˘ )*%& ęăš ęŁčĄ 龼č é¨ęĽĽ ä§â¨˘ 8. Press and hold the power button to turn off the VR goggles if not in use. Note: 1. Press the VIEW SWITCH button to switch from video transmission mode to front camera mode. Users can then watch the front view through the camera. To switch back to video transmission mode, press this button again. 2. After automatically searching the channels successfully, the channel will be recorded and no need to search again next time. 3. It is normal to observe some white noise on the screen. Menu Settings The parameters in the menu have been correctly set to the general settings before delivery. Adjust only when necessary. When turning the goggles on, press the MENU button to enter the menu. Then press â+â or â-âbutton to move up or down to choose the parameter for adjustment. Finally press the MENU Button again to select the parameter. Adjust the parameter with the â+â or â-â button. Press MENU Button again to exit. Brightness 10 Saturation Contrast CH 17 Current 5.8G Channel (Adjustable) CH SRCH 5.8G Automatically Search Channel RESET DATA Reset to Factory Settings CONNECT ON Connection Status ANGLE Âą90° Head Tracking Angle CH NUM 32 Frequency Band EXIT MENU Exit Menu Note: (1) After entering menu, if no further command is given within 2 seconds, the menu will disappear. (2) If your unable to find a clear channel, please got to the menu to change the frequency band or switch between CH NUM 32 or CH NUM 5 and try re-searching. Head Tracking Angle 1.Âą45° Goggle head tracking range Âą45°, gimbal is more sensitive to head track. 45° 30° Look up 45° 45° 90° Look down 45° 10 2.Âą90° Goggle head tracking range Âą90°, gimbal is less sensitive to head track. 90° 30° Look up 90° 90° 90° Look down 90° 11 Indicator Lights Instructions MENU VIEW SWITCH VISION DATA POWER CHANNEL SEARCH 5.8G 2.4G Power On Power Battery lifeâ¤30% Indicator Charging Power Off/ Fully Charged Data Signal Indicator Vision Signal Indicator Searching for Bluetooth Bluetooth/ Wi-Fi Connects Successfully Power Off Image Transmission Mode On Searches Channel Successfully. Power off/ Switch to Front Camera Legend High Frequency Flash Low Frequency Flash Solid Off Note: DATA indication light for the Android version VR goggles shows the Bluetooth connection status; DATA indication light for the iOS version VR goggles shows the Wi-Fi connection status. 12 Warnings 1.Keep the smartphone and the VR goggles within 3 meters when using the goggles. 2. Use the goggles in widely open space. Avoid using it in dangerous areas where you cannot walk freely about. Always fly with a second person when using the goggles. 3. Those who have eye diseases are not suggested to use the VR goggles. 4. It is suggested not to wear the VR goggles for over 90 minutes. 5. When the battery life of the goggles is less than 10%, you need to discontinue using the goggles and please charge them before using them again. 6. Please get familiar with the Menu and the function buttons before using the VR goggles. 7. Do NOT use the goggles in a direct path of sunlight (Please use the goggles less than 30 minutes if you have to use in direct sunlight) 8. Do NOT disassemble or damage the frames of the goggles. 9. Do NOT pierce or damage the adjustable headband. 10.Do NOT leave the battery on combustibles or unattended when charging for a long time. 11.Do NOT bend the antennas of the goggles. If the antennas are damaged due to improper use, Ehang will not offer complimentary maintenance. Storage Instructions 1. Please store the goggles at room temperature. 2. The goggles must be stored in places away from children, water, fire and especially excessive heat. 3. Do NOT discard batteries in general household waste. Damaged or unusable goggles batteries must be disposed in containers specially reserved for this purpose. When disposing of batteries, follow appropriate local guidelines and regulations. 13 Warranty Strict quality control will be conducted before delivery of your VR goggles. Please read the manual and get familiar with the operation before use. A 6-month warranty is guaranteed for problems not caused by userâs improper use. Removal of the products manufacturing label will be regarded as waiver of warranty. We will not offer complimentary maintenance if the label is removed or damaged, but limited warranty is still provided by Ehang. Contact Us Business Hour: Monday â Friday 10:00 A.M â 6:00 P.M (PST) Customer Service Phone: +1 650-533-8554 / 888-800-7056 Customer Service Email: support@ehang.com EHang, Inc. reserves all right to interpret this warranty. 14 The maximum operating ambient temperature of the equipment declared by the manufacturer is 40 The SAR limit of Europe is 2.0 W/kg. Device types VR Goggle Set has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification when properly worn on the body is 0.197 W/kg. This device was tested for typical body-worn operations with no distance between the back of the handset and the body. To maintain compliance with RF exposure requirements, use accessories that maintain a 0cm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements, and should be avoided. Hereby, Guangzhou EHang Intelligent Technology Co.,Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For the declaration of conformity, visit the Web site http://www.ehang.com/ Notice: Observe the national local regulations in the location where the device is to be used. This device may be restricted for use in some or all member states of the European Union (EU) This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the userâs authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help - This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types VR GOGGLES (FCC ID: 2ADPF-GVR-200B) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification when properly worn on head is 0.049W/kg.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Author : francis.zhang Create Date : 2016:03:07 16:28:27+08:00 Modify Date : 2016:06:08 15:25:39+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Title : VR眼镜说明书-美国版-3.7 Creator : francis.zhang Creator Tool : Adobe Illustrator CC 2014 (Windows) Metadata Date : 2016:06:08 15:25:39+08:00 Thumbnail Width : 88 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 9967 bytes, use -b option to extract) Original Document ID : uuid:9E3E5C9A8C81DB118734DB58FDDE4BA7 Document ID : xmp.did:9740a8c1-9554-c94e-b5dd-bcfe9afe5c07 Instance ID : uuid:913a9d16-57ce-46bd-a8e1-a5272faaa58b Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:dfba41f3-6de2-f243-8bab-f0e2ac49120c Derived From Document ID : xmp.did:dfba41f3-6de2-f243-8bab-f0e2ac49120c Derived From Original Document ID: uuid:9E3E5C9A8C81DB118734DB58FDDE4BA7 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:d0840d1a-d10e-c649-9922-d3a68c717eb3, xmp.iid:9740a8c1-9554-c94e-b5dd-bcfe9afe5c07 History When : 2015:05:11 12:36:44+08:00, 2016:03:07 15:44:52+08:00 History Software Agent : Adobe Illustrator CC (Windows), Adobe Illustrator CC 2014 (Windows) History Changed : /, / Startup Profile : Basic RGB N Pages : 1 Has Visible Transparency : True Has Visible Overprint : True Max Page Size W : 90.000000 Max Page Size H : 130.000000 Max Page Size Unit : Millimeters Font Name : ArialMT, HelveticaNeueLT-Thin, FZLTHK--GBK1-0, SourceHanSansCN-Light, SourceHanSansCN-Regular, AdobeSongStd-Light Font Family : Arial, HelveticaNeue LT 35 Thin, 方正兰亭黑_GBK, 思源黑体 CN, 思源黑体 CN, Adobe 宋体 Std Font Face : Regular, Regular, Regular, Light, Regular, L Font Type : Open Type, TrueType, TrueType, Open Type, Open Type, Open Type Font Version : Version 5.06, Version 6.1; 2002, 1.00, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 5.017;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168 Font Composite : False, False, False, False, False, False Font File Name : arial.ttf, HELVETICA LT 35 THIN_0.TTF, 58PIC_1.TTF, SourceHanSansCN-Light.otf, SourceHanSansCN-Regular.otf, AdobeSongStd-Light.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : 灰色 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: R=242 G=242 B=242 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 6.250000 Swatch Groups Colorants Magenta : 4.687500 Swatch Groups Colorants Yellow : 4.687500 Swatch Groups Colorants Black : 0.000000 Producer : Acrobat Distiller 10.0.0 (Windows) Page Count : 17EXIF Metadata provided by EXIF.tools