Guangzhou Juan Optical and Electronical Tech Joint Stock WG-20W-4 4 Channel Wireless 1080p Gateway with SD Card Recording User Manual

Guangzhou Juan Optical & Electronical Tech Joint Stock Co., LTD 4 Channel Wireless 1080p Gateway with SD Card Recording

User manual

                    General    A  gateway  that can  work  as  WNVR  but  use  TF card to record. It can add up to 4 WIFI cameras, and could  be  remote  access  by  cellphone. It  can  also work as a switch, to expand wired NVR or wired DVR to add WIFI cameras.   Features  Add up to 4 WIFI cameras  90 dB Audible alerts Recording to TF Card locally or to WNVR  Standalone and compatible with WNVR series  *IFTTT / Google home / Alexa integration*  Add device Step  Add to Home WIFI   Add to WNVR Add cameras to Gateway 1 Connect the Ethernet cable from router to gateway Press reset button for 3 seconds Press the SYNC button for 3 seconds 2 Open Night Owl connect Use an Ethernet cable to connect to WNVR and gateway directly Press the camera reset button for 3 seconds 3 Scan the QR code at the back of the gateway In NVR Menu, click Match code Wait until done 4 Input admin password Press the SYNC button for 3 seconds    5 Wait until done          User manualProduct name:4 Channel Wireless 1080p Gateway with SD Card Recording Model:WG-20W-4-JUN,WG4-2I,WG4-2I-16SDBrand:NIGHT OWL
 Spec GW-4 v1.0 Basic FOB Price USD  $14 Supplier Name  Juan Factory Model number    Components Main IC  Hi3518Ev200 WIFI mainchipset  RTL8188EUS Main function Speaker Enabled  Yes Speaker Output  8Ohm 0.5Watt Speaker Distance  20ft Recording  TF card(up to 128GB) Recording type  Motion / Doorbell / Manual(by app) Camera Connection Connection Type  WIFI IEEE 802.11 b/g/n Max connected cameras  4 Wireless range  MAX 360ft Line of sight General   Weatherproof Rating  N/A Power Supply  DC5V 1A Operating Humidity (%)  Humidity 95% or less (non-condensing) Operating Temperatures (F)  32ºF to 122ºF Weight (Product Only)(lbs)  TBC Dimensions (Product Only) L x W x H (inches)  TBC Power Consumption Per Camera  ≤5W Network Network connection  RJ45 10/100M   WIFI connection (to camera)  IEEE 802.11 b/g/n Transmission rate 11b: 11Mbps 11g: 54Mbps 11n: 150Mbps maxmum Antenna Gain  1.5 dBi ONVIF Version  N/A Protocols:   TCP/IP, UDP, HTTP, DHCP, DNS, NTP, QoS Dimensions / Weights Sell Unit UPC  N/A
 Sell Unit Dimensions L x W x H (inches)  N/A Sell Unit Weight (lbs)  N/A Master Pack UPC  N/A Master Pack Size  N/A Master Pack Dimensions L x W x H (inches)  N/A Master Pack Weight (lbs)  N/A Package Contents List all contents separately 1. 1 x Gateway; 2. 1 x DC 5V 1A power adaptor, 9ft power cable; 3. 1 x Mounting Hardware; 4. 1 x QSG Accessories Photos(except for the user manual)    Ref Photo
FCC Caution.  This  device  complies  with  part  15  of  the  FCC  Rules.  Operation  is  subject  to  the  following  two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  Any  Changes or  modifications  not  expressly  approved by the  party  responsible  for  compliance could void the user's authority to operate the equipment.  Note: This equipment has been tested and found to comply with the limits for a Class B digital device,  pursuant to part  15  of  the  FCC  Rules.  These  limits  are  designed to provide reasonable protection  against  harmful  interference  in  a  residential  installation.  This  equipment  generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,  may  cause  harmful  interference  to  radio  communications.  However,  there  is  no guarantee  that  interference  will  not  occur  in  a  particular  installation.  If  this  equipment  does cause harmful interference to radio or television reception, which can be determined by turning the equipment  off and on, the  user  is encouraged  to try  to correct  the  interference  by  one  or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into  an  outlet on a circuit different from that to which the  receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.  This  equipment  complies  with  FCC  radiation  exposure  limits  set  forth  for  an  uncontrolled environment.  This  equipment  should  be  installed  and  operated  with  minimum  distance  20cm between the radiator & your body.

Navigation menu