Guangzhou Panyu Juda Car Audio Equipment 4000774 Bluetooth Speaker User Manual

Guangzhou Panyu Juda Car Audio Equipment Co.,Ltd. Bluetooth Speaker

User Manual

2345678910retro bluetooth® speakerWe hope you enjoy your REALISTIC Retro Bluetooth Speaker with elegant cherry wood nishing to provide stunning sound. Please read this user's guide before using your new speaker.Package Contents • Speaker • AC Power cable • 3.5mm audio cable • User’s GuideWARNING: To reduce the risk of re or shock hazard, do not expose this product to rain or moisture.CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.The lightning symbol is intended to alert you to the presence of uninsulated, dangerous voltage within this product’s enclosure that might be of sucient magnitude to constitute a risk of electric shock. Do not open the product’s case.The exclamation symbol is intended to inform you that important operating and maintenance instructions are included in the literature accompanying this product.CAUTION!RISK OF ELECTRIC SHOCKDO NOT OPEN!IMPORTANT SAFETy INSTRUCTIONS1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all Instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.10. Only use attachment/accessories specied by the manufacturer.11. Unplug this apparatus during lightning storms or when unused for long periods of time.12. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.13. Water and Moisture: This product should be kept away from direct contact with liquids. The apparatus shall not be exposed to dripping or splashing and that no objects lled with liquids, such as vases, shall be placed on the apparatus. WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.14. Caution: This product uses a built-in battery. Batteries shall not be exposed to excessive heat such as sunshine, re, etc.15. Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. 16. This equipment is a Class II or double-insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.4000774User’s Guide3. Use the controls on your device, or the playback buttons on the speaker to play music. Notes: • The speaker will disconnect and power down from your device if they are too far apart, or left idle. To reconnect, move the speaker/ device within Bluetooth connection range, within 15 minutes. • Function of speaker playback buttons may vary depending on compatibility with your actual Blueooth device.Reset Bluetooth PairingNormally, your speaker automatically reconnects to the most recently paired device when switched on.If you want to change to other Bluetooth devices, or have diculty pairing to a new device, or experience problems reconnecting your current device, do the following: • In Bluetooth pairing mode, press and hold F/J for 3 seconds. You will hear an audio double tone (a low and a high note). This indicates the speaker is now successfully reset. Any previously paired devices are now cleared from the speaker's Bluetooth memory.Connecting with AUX INFor device players without Bluetooth functionality, use the included ⅛" (3.5mm) audio cable to connect to the speaker’s AUX IN jack. The speaker's AUX IN LED lights up green during connection.Note: • Bluetooth functionality is automatically deactivated when AUX IN is connected. • The speaker playback control buttons ; / and F/J are only valid in Bluetooth mode.ON/OFFTurn on/ o speakerF/J (Bluetooth mode and devices only) • Press once or more to skip to the next track(s) • Press and hold 3 seconds to skip to previous track; / (Bluetooth mode and devices only) • Play/ pause tracks • Activate Bluetooth mode to start searching pairing a Bluetooth device • Press and hold 3 seconds to disconnect Bluetooth connectionLEDsBLUETOOTH • ashes quickly − pairing • ashes slowly − out of range • lights steadily − connectedAUX IN lights green when line-in cable connectedBATTERY • Lights red during charging • Flashes slowly when battery lowVOLUME, BASS, TREBLEVolume and sound controlsTop Panel Controls TroubleshootingNo sound/power • Make sure the built-in battery is fully charged using the supplied AC power cable. Alternatively, use the cable to power and operate the speaker directly. • Check and turn up the volume on the speaker and your audio source. • If using AC power, check your cable is properly connected.Sound distorted • Adjust the bass and treble controls.FCC InformationThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. • Consult your dealer or an experienced radio/TV technician for help.Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: AUX IN For line-in listening optionBACK VIEWSubwoofer air portAC INConnect the included AC power cable here and to an AC mains outlet to charge the speaker's built-in battery, or to power the speaker directly.To AC outletTM(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Limited WarrantyGo to www.radioshack.com/help for details.RadioShack Customer Relations300 RadioShack Circle, Fort Worth, TX 7610217. No naked ame sources, such as lighted candles, should be placed on the apparatus.18. Batteries should be recycled or disposed as per state and local guidelines.19. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. 20. Allow at least 10cm distances around the apparatus for sucient ventilation.21. Use of the apparatus in moderate climates only.SpecificationsPower supply .......................................AC ~100-240V, 50/60HzPower consumption ............................................................... 25WBattery ...................14.8V, 2000mAh, 29.6W lithium polymerBattery Charging Time ......................................approx. 4 hoursPlaytime ..............................up to 16 hours at medium volumeFrequency Response .......................................... 45 Hz – 20KHz2.1 Output (max.) ............ 5 W x 2 tweeters, 15W subwooferS/N ratio .................................................................................... 70dBImpedance ...........................................................................4 OhmsDrivers ....0.75" neodymium tweeters, 4" ferrite subwooferBluetooth Protocol ................................................V2.1 with EDRDimensions (H x W x L) .........................................5.5 x 9.5 x 5.5"Speaker weight ................................................................... 5.51 lbsOperation Range......................................................................33 ftSpecications are subject to change and improvement without notice. Actual product may vary from the images found in this document.Power / Charge your Speaker1. Connect the supplied power cable to the AC IN jack and a standard mains wall outlet. •The BATTERY LED lights red during charging and turns o when fully charged.2. Unplug the cable after charging.Notes: • For best sound performance, fully charge the speaker before use, or when you hear the "Battery low" voice prompt, or the BATTERY LED ashes slowly.• The supplied power cable can also be used to directly power the speaker.Lithium Battery Notes:• Charge batteries on a reproof surface away from ammable items or liquids. Follow the instructions for charging the speaker and do not charge longer than recommended.• Recycle lithium batteries. Do not dispose of them in the trash. Do not burn or bury batteries. Do not puncture or crush. Do not disassemble.• If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. If in the eyes, rinse thoroughly with cool water. Immediately seek medical attention.Connecting to a Bluetooth Device1. Press the ON/OFF button to turn on the speaker. • The LED ashes blue quickly as your speaker searches for Bluetooth devices.2. Activate your device’s Bluetooth function (refer to your device’s user’s guide). When your device locates Realistic Retro, select this from the device list. If your smartphone requires a password, enter 0000. When paired, the indicator lights blue steadily.Complies with the European Union’s “Restriction of Hazardous Substances Directive,” which protects the environment by restricting specic hazardous materials and products.© 2016 General Wireless Operations Inc.All rights reserved. REALISTIC is a registered trademark used by General Wireless Operations Inc. dba RadioShack.radioshack.comThe Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by General Wireless Operations Inc. is under license.09A164000774 Printed in China4000774_UG_Eng.indd 1-10 9/9/2016 4:09:52 PM

Navigation menu