Guangzhou Panyu Juda Car Audio Equipment WC603 Bluetooth Speaker User Manual
Guangzhou Panyu Juda Car Audio Equipment Co.,Ltd. Bluetooth Speaker Users Manual
Users Manual
USER MANUAL WC 603 Classroom Bluetooth Speaker Contents Features .....................................................................................................................2 Contents For your Attention.....................................................................................................3-4 Panel.......................................................................................................................5-6 Connections...............................................................................................................7 Trouble shooting.........................................................................................................8 Specifications.............................................................................................................9 -1- Features Thanks for your purchase of our product. Please read through this manual before making connections and operating this product. Retain this manual for future reference. Bluetooth playback AUX input Package Contents: User manual DC adaptor Us er ma nua -2- For Your Attention IMPORTANT NOTES Please read through this manual before making connections and operating this product. Retain this manual for future reference. Don't open the cabinet of this unit. No user-serviceable parts inside. Refer servicing to qualified personnel only. Switch off the unit when you don't use it. Switch off the unit and disconnect it from the AC power supply when it is not being used for a long time. Don't install the unit in a place exposed to heating sources or direct sunshine. Don't install the unit in a place exposed to moisture or rain. The apparatus shall not be exposed to dripping or splashing and any object filled with liquids, such as vases shall not be placed on it. Install the unit on a horizontal, flat and firm surface with good ventilation. Never block the vents which will cause malfunction resulted from overheating. Use a soft and clean rag to clean the outside of the unit . Never clean it with chemicals or detergent. This book is only a guide for user's operation, not a criterion for configuration. Only use attachments/accessories specified by the manufacturer. Where the mains plug is used as the detachable device, the detachable device shall remain readily operable. -3- For Your Attention -4- Panel FRONT PANEL: 1. VOLUME+/Press to turn up/down the volume; 2. STANDBY/SOURCE SELECT Press to switch on the unit; Press repeatedly to select a signal source between Bluetooth or AUX input mode; 3. PLAY/PAUSE Press to temporarily pause a playback; press it again to resume the playback; 4. PREVIOUS/NEXT Press to return to the previous track or skip to the next track; (Note: All the button on the front panel are touch keys) 5. STANDBY (red indicator) 6. BLUETOOTH (blinking blue indicates pairing,solid blue indicates connected) 7. AUX IN (yellow indicator) -5- Panel REAR PANEL: 12 3 4 1. USB CHARGE PORT (5V) (Note: Use the USB cable (not included)to connect the USB and charge device.The charge port cannot charge battery in standby mode. There is no connection with the speaker after 10~15 minutes (no AUX input, USB charge or bluetooth connection), the speaker will turn to standby mode automatically and the red indicator light will illuminate. Press [PLAY/PAUSE] to wake up the speaker. The speaker will turn to auto standby mode after about 10~15 minutes. The unit cannot play music via USB charging port . 2. AUX INPUT 3. DC IN (10V) 4. POWER ON/OFF -6- Connections AUX IN This unit has an audio input terminal. Use the audio cable(not included) to connect the input terminal AUX IN on the rear panel of this player, press [SOURCE SELECT ] button on the front panel to switch to the AUX IN mode, the indicator on the front panel indicates in yellow that the player has been switched to AUX IN mode. Bluetooth Bluetooth Connection The model of the unit is WC 603,press [SOURCE SELECT] button on the front panel to switch to the corresponding signal source, use your mobile phone to search the bluetooth signal of the unit, then input the password 0000, the unit will synchronize to play songs on your mobile phone while they connected successfully. Disconnect the bluetooth on the mobile phone to switch off the bluetooth connect. Once the bluetooth is connected to your audio device successfully for the first time, you can power off the player then power on. The speaker will reconnect automatically.Press [PLAY/PAUSE] to resume the playback. Note: Bluetooth connection range is 30 feet. The model WC 603 in your device was not deleted. In bluetooth mode,[PLAY/PAUSE],[NEXT], [PREVIOUS], [VOLUME+/-] etc. are also active. -7- Model:WC 603 Troubleshooting Before resorting to maintenance service, please kindly check by yourself with the following chart. Symptom No Power Sound There is no sound or the sound is distorted. Cause(s) Remedy The DC power cord is not connected to the power Please check that the DC power cord is connected securely. supply or is not connected to a power supply securely. The volume is set to the minimum level. Audio device is not connected to the unit. Turn up the volume. Connect audio device via Bluetooth or Aux in. The buttons on the The unit is being interfered with static electricity Switch off and unplug the unit. Then connect the plug to the power supply unit do not work. etc. and switch it on again. -8- Specifications Power supply Power consumption Temperature Working environment Relative humidity Speaker output (Max) DC 10V 1.5A 15W -10~+35 5%~90% 5WX2 -9-
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 11 Create Date : 2014:08:04 14:51:50 Modify Date : 2014:08:04 14:51:50 Producer : Corel PDF Engine Version 9.397 Author : ¹ù¼ª¾ü Creator : CorelDRAW Version 9.397 Title : ÃÀ¹úLakeshore WC 603 (BL1603B) ¼ÓFCC˵Ã÷.cdrEXIF Metadata provided by EXIF.tools