Guangzhou Winson Information Technology WNC-5084 Barcode scanner User Manual
Guangzhou Winson Information Technology Co., Ltd. Barcode scanner
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3513128 |
| Application ID | Kpz2Yjhu7MkN5HMy943ihQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 77.12kB (964018 bits) |
| Date Submitted | 2017-08-16 00:00:00 |
| Date Available | 2017-08-16 00:00:00 |
| Creation Date | 2017-07-04 11:36:02 |
| Producing Software | Adobe PDF Library 11.0 |
| Document Lastmod | 2017-07-04 11:36:19 |
| Document Title | User Manual |
| Document Creator | Acrobat PDFMaker 11 Word 版 |
| Document Author: | xiaotong wei |
Winson bluetooth barcode scanner user manual Version V1.0 Content FCC&IC STATEMENT .............................................................................................................................................................. 一、Introduction....................................................................................................................................................................... 4 二、Using method .................................................................................................................................................................... 4 三、Setting method ................................................................................................................................................................. 4 四、Function introduction ..................................................................................................................................................... 5 4.1 Wire communication interface ................................................................................................................................... 5 4.1.1Wire output method options ............................................................................................................................... 5 4.1.2Wire output method automatic transfer switch ............................................................................................. 5 4.2 Keyboard language selection ...................................................................................................................................... 6 4.3 Sleeping time selection ................................................................................................................................................ 7 4.4 Character prefix and suffix .......................................................................................................................................... 8 4.4.1 Prefix setting ........................................................................................................................................................... 8 4.4.2 Suffix setting ........................................................................................................................................................... 8 4.5 Operation mode ......................................................................................................................................................... 9 4.6 Check parameter............................................................................................................................................................ 9 4.7 Character (Chinese) output code switch ................................................................................................................ 10 4.8 Restore default setting ............................................................................................................................................... 10 4.9 Firmware upgrade ....................................................................................................................................................... 10 4.10 Customize data edition/communication protocol/function setting ............................................................. 11 五、System Working status indication .............................................................................................................................. 12 六、 Trouble removal ............................................................................................................................................................ 14 七、Appendix - character list............................................................................................................................................... 14 FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. - English: " This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device." - French:" Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil nedoit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement." 一、Introduction Bluetooth barcode scanner uses Bluetooth 4.0 project design，matching with different decoding engines, it can meet the using requirements in different scenes. This guide mainly provides bluetooth barcode scanner’s various functions set commands and methods， Users can refer to this document to set up different functions. “*”logo means those functions are default function. 二、Using method The first time you get the bluetooth scanner, please follow the following three steps to use. 1. Turn on the scanner, means press the power button, red light flash. 2. Turn on mobile phone’s bluetooth, search for new bluetooth device. Different devices/ mobile phones you use, the first name of our bluetooth scanner shown on your devices are different, as “ Keyboard”, “Accessory”, “General Bluetooth HID barcode scanner” etc, so when your device searches for those name’s bluetooth device, please connect. After connection, your device will show “ WinsonScanner”, scanner red light off, green light normally on, and comes with successful connection sound. 三、Setting method Winson bluetooth scanner can switch different functions by scanning function barcodes to meet different application. There are two methods for setting: One: Common setting method: Scan “@SET” barcode, then scan relevant function barcode, finally scan “ @END” barcode. Two: Quick setting method: scan relevant function barcode directly, as set up inventory model: Scan “ @.WNT-F2000/” barcode directly, then scan “ @.WN-X-XXXXX/”. 四、Function introduction 4.1 Wire communication interface 4.1.1Wire output method options Two options: ① USB-HID keyboard output ② USB virtual com port output Function Command Barcode Remark @SET *USB output WN-W-L1000 USB-HID output USB-VCP output USB virtual com port output Notice:Before using USB virtual com WN-W-L1001 port please install USB transfer serial port driver first @END 4.1.2Wire output method automatic transfer switch The default is the open state, after opened, insert USB cable, it will shift to be wire output automatically. According to the request, client can close that automatic shift function Function Command Barcode Remark @SET *Turn on “USB wire output” Turn off “USB wire output” WN-T-L0000 USB port only charging function WN-T-L0001 After closed, USB cable is just for charging, data need to transfered by wireless transmission. @END 4.2 Keyboard language selection According to user computer language to choose corresponding keyboard language. If corresponding keyboard language don’t match computer language, the output character will appear scrambled. Function Command Barcode Remark @SET *USA WN-W-B1000 American FRENCH WN-W-B1001 France GEMRAN WN-W-B1002 Germany TUKISH WN-W-B1003 Turkey BELGIUM WN-W-B1004 French (Belgium) BRAZIL WN-W-B1005 Brazil CRZCH WN-W-B1006 Czech Republic SPANISH WN-W-B1007 @END Spanish (Latin America) 4.3 Sleeping time selection Function Command Barcode Remark @SET *20 seconds WN-T-G0001 60 seconds WN-T-G0003 3 minutes WN-T-G0009 minutes WN-T-G0015 15 minutes WN-T-G0045 30 minutes WN-T-G0090 No Sleeping time WN-T-G0000 @END No Sleeping time (Under wire output situation, recommend to use No Sleeping time; Under wireless output situation, Not Recommend to use No Sleeping time) 4.4 Character prefix and suffix 4.4.1 Prefix setting According to the request, scanner can be added the length 10Byte prefix and suffix. For example, Sets the prefix character “#Ab9” to barcode “1234567” , then output barcode content is “#Ab91234567”. 1. Scan “Enter setting” barcode 2. Scan “User-defined prefix + barcode” barcode 3. Scan “#”, “A”, “B”, “9” Barcode one by one. 4. Scan “Save&Exit” Function Command Barcode Remark @SET *Disable prefix WN-T-I0000 User-defined prefix barcode WN-T-I0002 @END 4.4.2 Suffix setting For example, Sets the suffix “1234567%B”. character “%B” to barcode “1234567” , then output barcode content is 1. Scan “Enter setting” barcode 2. Scan “User-defined suffix + barcode” barcode 3. Scan “%”, “B” barcode one by one. 4. Scan “Save&Exit” Notice: System default: Common End symbol 0x0D(Enter)，0x0A(line feed)，0x09(Tab) Command Barcode Remark @SET Disable suffix *User-defined suffix barcode WN-T-I1000 WN-T-I100A @END No suffix The suffix character can belongs to anyone of ASCii list, user can set according to the request 4.5 Operation mode Notice: 1.The above 5 barcodes are quick commands, successful scanning means successful setting 2. The following three functions “Upload data”, “Data amount”, “Delete data” in inventory mode are not available when the scanner is under setting situation. After scanned “ Exit &Save” barcode, that three functions will be back to be available. 3. Storage(Suitable for all winson wireless barcode scanner) Inventory mode: The storage is 49,000 pcs 30Byte barcodes, 104,500 pcs 13Byte barcodes Cache mode: The storage is 14,200 pcs 13Byte barcodes, 30,300 pcs 13Byte barcodes Function *Common mode/Real time mode Quick command Barcode Remark @.WN-T-F0000/ Scan and transfer, failure alarm Inventory mode @.WN-T-F2000/ Scan the barcode, not upload immediately, store in memory automatically, all data will upload after scan “Upload data”barcode, and it will clear all data after scan “Clear data”, or check the data amount after scan “Data amount” barcode. Upload data @.WN-T-F2001/ Upload barcode data Data amount @.WN-T-F2002/ Delete data @.WN-T-F2003/ Upload barcode data amount Delete all Inventory data 4.6 Check parameter Function Command Barcode Remark @SET Output parameter system 1.Firmware version WN-W-C1000 @END 2.battery capacity 4.7 Character (Chinese) output code switch Chinese character output is mainly for China Mainland user to develop suitable for Chinese output’s function. Function Command No Chinese output @.WN-W-F3000/ GBK output @.WN-W-F3001/ UTF output @.WN-W-F3002/ Barcode 4.8 Restore default setting Function Command Barcode Remark @SET Restore default setting WN-WH0000 Bluetooth will not interrupt @END 4.9 Firmware upgrade Function Command Barcode Remark @SET TX Firmware upgrade WN-T-K0000 @END Connect scanner to PC by USB cable, scan upgrade barcode, then restart the scanner to check whether it finishes upgrade or not 4.10 Customize data edition/communication protocol/function setting 1、This function is for users with special requirements to customize data edition function. Users without a custom character editing function please ignore this feature. Custom-1 User customize character request:�If barcode is more than 17Bytes, then only left the last 17Bytes; if barcode is more than or equal with 17Bytes, all character will keep；�Remove the suffix return 五、System Working status indication Serial number Boot to detect hints Status indicators Sounds indicators LED light indicators Wireless module detect abnormality Three short frequency) Red light flash three times External storage module abnormality Two Long frequency) Normally turn on means in bluetooth pairing status beeps(high beeps (high None Red light flash two times Red light Continuous flashing Pairing status hint Wireless pairing failure None Red light continuous flashing until power off Wireless success Two short beeps（high／mid frequency） Green light normally on pairing Setting status hint Enter setting One long beep and two short beeps （ high ／ mid ／ low frequency） Green light flash one time Exit & Save One long beep and two short beeps （ high ／ mid ／ low frequency） Green light flash one time Setting command state One long beep and one short beep （ high ／ low frequency） Green light normally on Effective command One long beep and two short beeps （ high ／ mid ／ low frequency） Green light flash one time 10 on-effective command One long beep Green light off, red light on,sound stop, indicator returns to its previous state 11 Inventory mode data upload success One short frequency) beep(high Green light flash one time 12 Inventory mode data upload failure Three short frequency) beeps(middle Red light flash three times 13 Inventory mode data Overflow Two long frequency) Inventory hint mode beeps(high Red light flash two times Real time/common mode hint 14 Data upload success One short frequency) beep(high 15 Data upload failure Three short frequency) beeps(middle Battery hint Green light flash once Red light flash three times capacity 16 Charging status None 17 Charging completed None Blue light on Blue light off，green light on 18 Sleeping power off None Light off 19 Low battery hint None Red light on (does not affect the green light status) Quick hint 20 command Quick command One long beep and two short beeps （ high ／ mid ／ low frequency） Green light flash once 六、 Trouble removal 七、Appendix - character list Control character Hex ^@（NULL） 00 ^A（SOH） 01 ^B（STX） 02 ^C（ETX） 03 ^D（EOT） 04 ^E（ENQ） 05 ^F（ACK） 06 ^G（BEL） 07 ^H（BS） 08 ^I（HTab） 09 ^J（LF） 0A ^K（VTab） 0B ^L（FF） 0C ^M（CR） 0D ^N（SO） 0E ^O（SI） 0F ^P（DLE） 10 ^Q（DC1） 11 ^R（DC2） 12 ^S（DC3） 13 ^T（DC4） 14 ^U（NAK） 15 ^V（SYN） 16 ^W（ETB） 17 ^X（CAN） 18 ^Y（EM） 19 ^Z（SUB） 1A ^[（ESC） 1B ^\（FS） 1C ^]（GS） 1D ^^（RS） 1E ^_（US） 1F SPC 20 Character Hex 21 22 # 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 30 31 32 33 34 35 36 7 37 38 39 3A 3B 3C 3D 3E 3F 40 41 42 43 44 45 46 47 48 49 4A K 4B 4C 4D 4E 4F 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5D 5E _ 5F 60 61 62 63 64 65 66 67 68 69 6A 6B 6C 6D 6E 6F 70 71 72 s 73 74 75 76 77 78 79 7A 7B 7C 7D 7E DEL 7F Function button Hex F1 80 F2 81 F3 82 F4 83 F5 84 F6 85 F7 86 F8 87 F9 88 F10 89 F11 8A F12 8B Backspace 8C Tab 8D Return（ENTER） 8E Enter（Numeric Keypad） 8F Esc 90 Arrow Down 91 Arrow up 92 Arrow right 93 Arrow left 94 Insert 95 Home 96 End 97 Page up 98 Page down 99 Left Shift 9A Left Ctrl 9B Left Alt 9C Left GUI 9D Right Shift 9E Right Ctrl 9F Right Alt A0 Right GUI A1 Caps Lock A2
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : xiaotong wei Create Date : 2017:07:04 11:36:02+08:00 Modify Date : 2017:07:04 11:36:19+08:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08 Metadata Date : 2017:07:04 11:36:19+08:00 Creator Tool : Acrobat PDFMaker 11 Word 版 Document ID : uuid:da4b1347-a4ce-452e-a66f-2b974f0e4f0e Instance ID : uuid:fd757ce4-e9fe-4137-b937-5c89ea1d125d Subject : 530 Format : application/pdf Creator : xiaotong wei Producer : Adobe PDF Library 11.0 Source Modified : D:20170704030436 Company : KSO Product Build Ver : 2052-10.1.0.6554 Page Layout : OneColumn Page Count : 22EXIF Metadata provided by EXIF.tools