Guangzhou Xunbao Electronics Technology XB-50566R wireless barcode scanner User Manual

Guangzhou Xunbao Electronics Technology CO., LTD wireless barcode scanner

User Manual

1、Scan Factory Default”“Forced PairingOne scanner pair with one receiverWireless Barcode Scanner User ManualVersion (Customized) Power Off (Note: Scan this barcode, scanner will make a long beep, then power off) This barcode scanner provides a precise and complete solution with easy-using、fast data-recording and saving for computer information system. The scanner supplies three scanning mode: Button-trigger mode、Auto-continuous mode and Auto-flash mode ,and the default one is Button-trigger mode Introduction of the lights that in the base: When plug thebase into PC, the orange indicator light of POWER and red indicator light of DEVICE are on. The blue indicator light of DATA will be flash continuously, when paired succeed, or 20s later after inserted into PC, the blue light will change to flash once every about one second. When the scanner is charged on the base, the green indicator light of CHARGE will flashing, when fullycharged, it will be off. The scanner will turn off in 20s with a long beep if it not work. If you want to use it again, just press the button, and two beeps will be heard. All parameter settings of the scanner can finished by scan the setting barcodes, and saved in the storage, even power off these settings still exist. This is a easily user manual for this scanner, if you need more details about how to use ,please get the manual from distributors, or download from our official websiteIntroductionFactory Default2 Pull and plug receiver to PC3、When blue indicator light of DATA in receiver flashing continuously, to scan “Forced Pairing”, this step will clear away the previous pairing, and finish the present pairing, after pairing succeed, the scanner will make a sound of “Beep”、Note: After pairing succeed, the blue indicator light DATA in receiver will flash (about 1time/sec), then open a text to scan needed barcode, in this case blue light flash too, and the data can be seen in the text. of Inventory ModeUpload all data and cleared (Note: Upload all data stored and clear them) Upload all data and no cleared（Note：Upload all data stored but do not clear them） Upload one data and cleared (Note: Upload one data stored and clear it) Upload one data and no cleared(Note: Upload one data stored but do not clear it) Display the number of barcode to be uploadedClearData Saving SettingScanning Mode Button Trigger Mode (Default)Auto-Continuous Scanning ModeAuto-Flashing ModeSuccessful data upload indicate (two beeps)（Note：There is two beeps after data uploaded succeed）Sound On (Default) Sound Off Sound LouderSound Lower Buzzer Successful data upload indicate (one beep)（Note:There is one beep after data uploaded succeed）USA (Default)GermanyFranceKeyboard Mode Language ChoiceXB-5066R
Capitalize Lower CaseCase SwapNoneKeyboard Caps Lock ControlSuffix SettingCR CR & LF NoneShock Setting Enable DisableSymbologies SelectionEnable CODE-39Disable CODE-39Enable FULL ASCIIDisable FULL ASCII Enable UPC-ADisable UPC-AEnable UPC-EDisable UPC-EEnable EAN-13Disable EAN-13Enable EAN-8Disable EAN-8Enable CODE-93Disable CODE-93Enable CODE-128Disable CODE-128Enable CODEBARDisable CODEBAREnable Interleaved 2 of 5Disable Interleaved 2 of 5 Enable Industrial 2 of 5Disable Industrial 2 of 5 Enable MSI Disable MSI Enable CODE-11Disable CODE-11Enable Matrix 2 of 5 Disable Matrix 2 of 5 Enable Postal 2 of 5 Disable Postal 2 of 5 Enable Aviation 2 of 5Disable Aviation 2 of 5Enable GS1 OmnidirectionalDisable GS1 OmnidirectionalEnable GS1 LimitedDisable GS1 Limited
FCC StatementThis device complies with Part 15 of the FCC rules. Operation is subject to the following twoconditions: 1) this device may not cause harmful interference, and 2) this device must acceptany interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generatesuses and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct the interference by one or moreof the following measures:--Reorient or relocate the receiving antenna.--Increase the separation between the equipment and receiver.--Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.--Consult the dealer or an experienced radio/TV technician for help.Changes or modifications not expressly approved by the party responsible for compliance couldvoid the user’s authority to operate the equipment.

Navigation menu