Guangzhou Xunbao Electronics Technology XB-50566R wireless barcode scanner User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3063760
Application ID	U+bUCkX8CjQq9jT0j/3E7A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.97kB (87109 bits)
Date Submitted	2016-07-14 00:00:00
Date Available	2016-07-17 00:00:00
Creation Date	2016-06-07 10:50:55
Producing Software	Corel PDF Engine Version 14.0.0.701
Document Lastmod	2016-07-11 10:56:01
Document Title	5066RT 2.4G英文无线使用手册
Document Creator	CorelDRAW
Document Author:	lenovo

Introduction
Wireless Barcode Scanner
User Manual
XB-5066R
This barcode scanner provides a precise and complete
solution with easy-using、fast data-recording and saving
for computer information system. The scanner supplies
three scanning mode: Button-trigger mode、
Auto-continuous mode and Auto-flash mode ,and the
default one is Button-trigger mode
Introduction of the lights that in the base: When plug
thebase into PC, the orange indicator light of POWER
and red indicator light of DEVICE are on. The blue
indicator light of DATA will be flash continuously, when
paired succeed, or 20s later after inserted into PC, the
blue light will change to flash once every about one
second. When the scanner is charged on the base, the
green indicator light of CHARGE will flashing, when fully
charged, it will be off.
The scanner will turn off in 20s with a long beep if it not
work. If you want to use it again, just press the button, and
two beeps will be heard.
All parameter settings of the scanner can finished by
scan the setting barcodes, and saved in the storage,
even power off these settings still exist.
This is a easily user manual for this scanner, if you
need more details about how to use ,please get the
manual from distributors, or download from our official
website
Data Saving Setting
Inventory Mode
Upload all data and cleared
(Note: Upload all data stored and clear them)
Buzzer
Sound On (Default)
Sound Off
Upload all data and no cleared
（Note：Upload all data stored but do not clear them）
Sound Louder
Upload one data and cleared
(Note: Upload one data stored and clear it)
Sound Lower
Upload one data and no cleared
(Note: Upload one data stored but do not clear it)
Factory Default
Display the number of barcode to be uploaded
Successful data upload indicate (one beep)
（Note:There is one beep after data uploaded succeed）
Forced Pairing
One scanner pair with one receiver
1、Scan “ Factory Default”
Clear
Successful data upload indicate (two beeps)
（Note：There is two beeps after data uploaded succeed）
Scanning Mode
Keyboard Mode
Version (Customized)
2、Pull and plug receiver to PC
3、When blue indicator light of DATA in receiver flashing
continuously, to scan “Forced Pairing”, this step will
clear away the previous pairing, and finish the present
pairing, after pairing succeed, the scanner will make a
sound of “Beep”
Language Choice
Button Trigger Mode (Default)
USA (Default)
Auto-Continuous Scanning Mode
Power Off
(Note: Scan this barcode, scanner will make
a long beep, then power off)
Note: After pairing succeed, the blue indicator light of
DATA in receiver will flash (about 1time/sec),
then open a text to scan needed barcode, in
this case blue light flash too, and the data can
be seen in the text.
Auto-Flashing Mode
Germany
France
Keyboard Caps Lock Control
Capitalize
Symbologies Selection
Disable EAN-8
Enable CODE-39
Enable CODE-93
Lower Case
Disable MSI
Disable CODE-39
Enable CODE-11
Disable CODE-11
Disable CODE-93
Enable FULL ASCII
Case Swap
Enable Matrix 2 of 5
Enable CODE-128
Disable Matrix 2 of 5
Disable FULL ASCII
Disable CODE-128
None
Enable Postal 2 of 5
Enable UPC-A
Suffix Setting
Enable CODEBAR
Disable Postal 2 of 5
CR
Disable UPC-A
Disable CODEBAR
Enable Aviation 2 of 5
CR & LF
Enable UPC-E
Enable Interleaved 2 of 5
Disable Aviation 2 of 5
Disable UPC-E
None
Shock Setting
Enable
Disable
Enable EAN-13
Disable EAN-13
Enable EAN-8
Disable Interleaved 2 of 5
Enable GS1
Omnidirectional
Enable Industrial 2 of 5
Disable GS1
Omnidirectional
Disable Industrial 2 of 5
Enable GS1 Limited
Enable MSI
Disable GS1 Limited
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: 1) this device may not cause harmful interference, and 2) this device must accept
any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
--Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : lenovo
Title                           : 5066RT 2.4G英文无线使用手册
Create Date                     : 2016:06:07 10:50:55+08:00
Creator Tool                    : CorelDRAW
Modify Date                     : 2016:07:11 10:56:01+08:00
Metadata Date                   : 2016:07:11 10:56:01+08:00
Producer                        : Corel PDF Engine Version 14.0.0.701
Document ID                     : uuid:5883b5be-25e4-4537-917d-bde0089f327c
Instance ID                     : uuid:2bcccbac-788c-484c-b57a-ebb86f009232
Page Count                      : 3
Author                          : lenovo

EXIF Metadata provided by EXIF.tools