Guard RFID Solutions AT ACTIVE RFID TAG USED FOR LOCATION AND PERIMETER PROTECTION OF ASSETS User Manual Tag Exciter Location Appliance

Guard RFID Solutions ACTIVE RFID TAG USED FOR LOCATION AND PERIMETER PROTECTION OF ASSETS Tag Exciter Location Appliance

Users Manual

PRODUCT INFORMATION 02-00001-101 Specifications Subject to Change Without Notice. © 2009 Guard RFID Solutions, Inc. Guard RFID Solutions Inc. #140 – 766 Cliveden Avenue Delta, BC Canada V6M 6C7 Tel: 866.785.7343 Fax: 604.524.4018 www.guardrfid.com Conforms to UL-294 FCC ID: VZKAT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. Article Tags AT-1BLF, AT-2BLF FE A T U R E S :  Small and light for deployment on small or large articles  36 months battery life  Tamper detection and motion sensors  Waterproof DE S C R I P T I O N : The AT-1BLF and AT-2BLF are Active Tags for tracking, location and protection of Articles and Equipment. Both tags have locating Beacon message capability, and include a Low Frequency (LF) Receiver so that it can be instantly detected at locations that are equipped with GuardRFID’s Tag Exciters. This detection method enables GuardRFID’s system to control doors, for example, so as to protect a tagged article from leaving the perimeter, or to support applications where better granularity of tag location is required. The AT-1BLF transmits periodic Beacon messages at a constant rate, while the AT-2BLFhas an integrated motion detector which is used to alter the Beacon rate based on whether the tag is stationary or in motion. The AT-2BLF also contains a tamper detection mechanism. Transmission of data from the Tags is exceptionally rapid, allowing literally hundreds of Tags to be detected simultaneously at choke points, and also enabling a high density of Tags to coexist within the system coverage area. Both Tags are designed to be either mounted using an adhesive “peel and stick” label at the back of the Tag, or by employing GuardRFID’s patented tag mounting mechanism. The tag mount enables the Article Tags to be mounted on round and cylindrical surfaces, such as poles and power cables. SP E C I F I C A T I O N S : A T - 1 B LF A T - 2 B L F Part Number 61-10200 61-10201 Transmit Frequency 433 MHz 433 MHz Receive Frequency 125 KHz 125 KHz Battery Life 36 months 36 months Beacon Interval 12 seconds constant 10 minutes static, 12 seconds moving Sensors None Motion and Tamper Dimensions 1.1 x 0.48” (28 x 12.2 mm) 1.1 x 0.48” (28 x 12.2 mm) Weight 8 gm 8 gm Operating Temperature -4° F to 122°F (-20°C to 50°C) -4° F to 122°F (-20°C to 50°C) Humidity 0 – 95% RH non-condensing 0 – 95% RH non-condensing Regulatory FCC Part 15 Approved FCC Part 15 Approved Warranty Prorated over 36 months Prorated over 36 months

Navigation menu