Guard RFID Solutions AT4 ACTIVE RFID TAG USED FOR PROTECTION OF ASSETS User Manual Tag Exciter Location Appliance

Guard RFID Solutions ACTIVE RFID TAG USED FOR PROTECTION OF ASSETS Tag Exciter Location Appliance

User Manual

PRODUCT INFORMATION 02-00083-104 Specifications Subject to Change Without Notice. © 2013 Guard RFID Solutions, Inc. Guard RFID Solutions Inc. #140 – 766 Cliveden Place Delta, BC Canada V6M 6C7 Tel: 866.785.7343 Fax: 604.524.4018 guardRFID.com Article Tag – Acive Label AT-4BLF FE A T U R E S :  Small, lightweight and only 0.23” (5.95mm) in height  Can be applied to most surfaces including on metal  Up to 24 months operation  Integrated motion and temperature sensors  Waterproof and easy-to-clean DE S C R I P T I O N : The AT-4BLF Article Tag is an active RFID tag for tracking, locating, and protecting equipment and other assets that require an ultra-low profile tag with a small footprint. The tag can be placed on almost any surface, including metal surfaces, without significant degradation in performance. The Tag has an integrated motion sensor that can be used to alarm on movement, and which increases the Beacon rate when the tag is in motion. A temperature sensor allows monitoring of ambient temperature between -10º to +60º Celcius. The tags have Ultra-High Frequency (UHF) Beacon message capability for presence-detection and long-range location using GuardRFID’s Tag Readers. They also include a Low Frequency (LF) Receiver that instantly detects entry into critical security zones or other locations of interest that are equipped with GuardRFID’s Tag Exciters. This proximity location technology can instantly secure doors to protect a tagged article from leaving the perimeter, and can support numerous applications where better granularity of tag location is required. GuardRFID’s industry-leading tag communication protocol allows hundreds of tags to be detected simultaneously at security or detection points and enables a high density of tags within the system coverage. The Article Tag can be directly applied to an object using an extremely strong peel-and-stick adhesive label at the back of the tag. SP E C I F I C A T I O N S : AT- 4 B L F Part Number 61-10500 Transmit Frequency 433 MHz Receive Frequency 125 KHz Battery Life 12 months nominal based on 60% motion 24 months nominal based on 5% motion Beacon Interval 10 minutes static, 12 seconds while in motion Sensors Motion, Temperature - 14° to 140° F (-10° to +60° C) Dimensions 1.56” x 1.26” x 0.23” (40mm x 32 mm x 5.95mm) Weight 6 gm Operating Temperature -4° F to 122°F (-20°C to 50°C) Tag Replacement Warranty – Prorated up to a maximum term of 12 months This device complies with part 15 of the FCC Rules and with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. FCC ID: VZKAT4 IC: 9937A-AT4

Navigation menu