Guard RFID Solutions AT4 ACTIVE RFID TAG USED FOR PROTECTION OF ASSETS User Manual Tag Exciter Location Appliance

Download:
Mirror Download [FCC.gov]
Document ID	2136876
Application ID	VvExobdgXw4PCz/d8kxp+w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	44.64kB (557978 bits)
Date Submitted	2013-12-09 00:00:00
Date Available	2013-12-09 00:00:00
Creation Date	2013-12-04 10:44:02
Producing Software	Microsoft® Word 2010
Document Lastmod	2013-12-04 10:44:02
Document Title	Tag Exciter – Location Appliance
Document Creator	Microsoft® Word 2010
Document Author:	John Mitchell

PRODUCT INFORMATION
Article Tag – Acive Label
AT-4BLF
FEATURES:

Small, lightweight and only 0.23” (5.95mm) in height

Can be applied to most surfaces including on metal

Up to 24 months operation

Integrated motion and temperature sensors

Waterproof and easy-to-clean
DESCRIPTION:
The AT-4BLF Article Tag is an active RFID tag for tracking, locating, and protecting equipment and
other assets that require an ultra-low profile tag with a small footprint. The tag can be
placed on almost any surface, including metal surfaces, without significant degradation
in performance.
The Tag has an integrated motion sensor that can be used to alarm on movement,
and which increases the Beacon rate when the tag is in motion. A temperature
sensor allows monitoring of ambient temperature between -10º to +60º Celcius.
The tags have Ultra-High Frequency (UHF) Beacon message capability for presencedetection and long-range location using GuardRFID’s Tag Readers. They also include a Low
Frequency (LF) Receiver that instantly detects entry into critical security zones or other locations of
interest that are equipped with GuardRFID’s Tag Exciters. This proximity location technology can
instantly secure doors to protect a tagged article from leaving the perimeter, and can support
numerous applications where better granularity of tag location is required.
GuardRFID’s industry-leading tag communication protocol allows hundreds of tags to be detected
simultaneously at security or detection points and enables a high density of tags within the system
coverage. The Article Tag can be directly applied to an object using an extremely strong peel-andstick adhesive label at the back of the tag.
SPECIFICATIONS:
AT-4BLF
Part Number
61-10500
Transmit Frequency
433 MHz
Receive Frequency
Battery Life
Guard RFID Solutions Inc.
#140 – 766 Cliveden Place
Delta, BC
Canada V6M 6C7
Tel: 866.785.7343
Fax: 604.524.4018
guardRFID.com
Beacon Interval
Sensors
Dimensions
Weight
Operating Temperature
125 KHz
12 months nominal based on 60% motion
24 months nominal based on 5% motion
10 minutes static, 12 seconds while in motion
Motion, Temperature - 14° to 140° F (-10° to +60° C)
1.56” x 1.26” x 0.23” (40mm x 32 mm x 5.95mm)
6 gm
-4° F to 122°F (-20°C to 50°C)
Tag Replacement Warranty – Prorated up to a maximum term of 12 months
FCC ID: VZKAT4
IC: 9937A-AT4
This device complies with part 15 of the FCC Rules and with Industry Canada license‐exempt RSS standard(s). Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE:
02-00083-104
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Specifications Subject to Change Without Notice. © 2013 Guard RFID Solutions, Inc.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
Language                        : en-CA
Tagged PDF                      : Yes
Title                           : Tag Exciter – Location Appliance
Author                          : John Mitchell
Creator                         : Microsoft® Word 2010
Create Date                     : 2013:12:04 10:44:02-08:00
Modify Date                     : 2013:12:04 10:44:02-08:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools