Guard RFID Solutions ST ACTIVE RFID TAG USED FOR LOCATION AND PERIMETER PROTECTION OF PEOPLE AND ASSETS User Manual Tag Exciter Location Appliance

Guard RFID Solutions ACTIVE RFID TAG USED FOR LOCATION AND PERIMETER PROTECTION OF PEOPLE AND ASSETS Tag Exciter Location Appliance

Users Manual

PRODUCT INFORMATION 02-00038-107 Specifications Subject to Change Without Notice. © 2011 Guard RFID Solutions, Inc. Conforms to UL-294 FCC ID: VZKST This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. Guard RFID Solutions Inc. #140 – 766 Cliveden Avenue Delta, BC Canada V6M 6C7 Tel: 866.785.7343 Fax: 604.524.4018 www.guardrfid.com Staff Tag ST-1BLF, ST-3BLF-TR FE A T U R E S :  Low profile for attachment to Proximity Cards  12 months battery life – Replaceable batteries  2-way communications for Paging capability  Two configurable buttons for custom functions  Audio-Visual Indicators, Motion and Fall Detection  Splash-resistant DE S C R I P T I O N : The ST-1BLF and ST-3BLF-TR are low profile tags for tracking, location and security of personnel. These tags have locating “Blink” message capability for RTLS applications and also include a Low Frequency (LF) Receiver so that they can be instantly detected at areas of interest such as building exits, secure rooms, or workstations. The tags can trigger security-related action, identification/authentication, and patient interaction recording upon entering detection or security zones created using GuardRFID Tag Exciters. The ST-3BLF-TR has two buttons to allow users to send configurable alerts to the system as well as two visual indicators. It also has a UHF Receiver so that the tag-wearer can receive alerts or acknowledgements from the system through the indicators and an audible buzzer, and contains a sensor to provide the ability to sense motion or detect a fall. This enables powerful staff duress call and personnel safety capability, as well as paging functionality. The low profile design ensures that they can be comfortably carried using a clip or lanyard. They can also be coupled with existing personnel badges or proximity cards using the convenient adhesive label on the tag. Splash-resistance ensures that these tags can be worn outdoors and can be easily cleaned and sterilized. SP E C I F I C A T I O N S : S T - 1 B L F S T - 3 B L F - TR Part Number 61-10401 61-10400 Transmit Frequency 433 MHz 433 MHz Receive Frequency 125 KHz 433 MHz and 125 KHz Battery Life 12 months – replaceable batteries 12 months – replaceable batteries Beacon Interval 10 sec Programmable, 10 sec to 10 min – default 30 sec User Interfaces None 2 x buttons, 2 x Visual Indicators, Audio transducer Sensors None Fall and Motion Detection Dimensions 3.28 x 1.94 x 0.17” (83 x 49 x 4.3 mm) 3.28 x 1.94 x 0.17” (83 x 49 x 4.3 mm) Weight 20 gm 20 gm Operating Temperature -4° F to 122°F (-20°C to 50°C) -4° F to 122°F (-20°C to 50°C) Humidity 0 – 100% RH non-condensing 0 – 100% RH non-condensing Regulatory FCC Part 15 Approved FCC Part 15 Approved Warranty Prorated over 12 months Prorated over 12 months

Navigation menu