Guard RFID Solutions WK1 Wireless Keypad Module User Manual GuardRFID Wireless Bypass Keypad 02 40000 001

Download:
Mirror Download [FCC.gov]
Document ID	1025087
Application ID	8Y1EJjbM6pqhHMuHtpSJxw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	75.3kB (941235 bits)
Date Submitted	2008-11-03 00:00:00
Date Available	2008-11-04 00:00:00
Creation Date	2008-07-29 10:26:55
Producing Software	Acrobat Distiller 8.0.0 (Windows)
Document Lastmod	2008-07-29 10:26:55
Document Title	GuardRFID Wireless Bypass Keypad 02-40000-001
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Zahir Abji

BK-A433W
ARGUS Wireless Bypass Keypad
Product Overview
The ARGUS BK‐A433W Wireless Bypass Keypad is used at egress points to:
• Override a magnetic door lock in the event a staff member takes the re‐
sponsibility to allow egress to a Tag that is not normally allowed through
the egress point. A unique PIN code is required to be entered on the Key‐
pad in order to perform this function, which is recorded, along with the
time of day, within GuardRFID’s system.
• Annunciate Warnings and Alarms at egress points.
The Keypad only requires power to operate, and has radio transmitter to commu‐
nicate with the Argus Tag Reader/Controller that it is associated with at the re‐
spective egress location.
Application
The Keypad requires 12VDC to operate. It is usually placed within the Low Fre‐
quency field created by GuardRFID’s Tag Exciter, as shown in the diagram below.
#8 ‐ 1600 Derwent Way
Delta, BC
Canada V3M 6M5
T: 604.998.4018
F: 604.524.4018
www.guardrfid.com
When a prohibited Tag enters the associated Tag Exciter field, and a door or ele‐
vator is sensed to be closed, the Keypad emits an audible Warning signal, and the
yellow LED flashes. If the door is sensed to be open when the Tag enters the field,
a full Alarm condition will be declared and a much louder audible signal is emit‐
ted, and the red LED will flash. These Warning and Alarm audible sounds are ter‐
minated upon entering a pre‐determined unique PIN code.
Wireless Keypad
Tag Exciter
125KHz RF Field
Physical Features
Specifications:
Alarm
Warning
Power/Good RF connection ‐ Solid
Bad RF connection ‐ Flashing
Input Voltage: 12 VDC, 0.2A
Power Consumption: 2.4W Typ.
Indicators:
Power ON/RF Connection OK
Warning LED
Alarm LED
Audible Enunciator
Dimensions: 4.53” x 2.78” x 1.5”
Weight:
85 g
Environmental: ‐10° to +50°C
95% RH (non‐condensing)
Antenna
Audio Transducer
Front View
©2008 Guard RFID Solutions Inc. All rights reserved. Specifications subject to change without notice
Side View
02-40000-001

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2008:07:29 10:26:55-07:00
Create Date                     : 2008:07:29 10:26:55-07:00
Title                           : GuardRFID Wireless Bypass Keypad 02-40000-001
Creator                         : Zahir Abji
Producer                        : Acrobat Distiller 8.0.0 (Windows)
Author                          : Zahir Abji

EXIF Metadata provided by EXIF.tools