LAVINA 25LMX USA Version 1 2016
2016-06-14
: Guide Lavina 25Lmx Usa Version 1 2016 LAVINA 25LMX USA version 1 2016 SUNBELT LAVINA X SERIES 2016 Lavina manuals Niagara-Library
Open the PDF directly: View PDF 
Page Count: 41
- WARRANTY AND RETURNS
- 1. GENERAL INFORMATION
- Manufacturer
- General Description
- Machine characteristics
- Main design
- Environmental Conditions
- Electrical Connection
- VACUUM CONNECTION
- TECHNICAL DATA
- VIBRATIONS
- SONOROUS EMISSIONS
- LABEL DATA
- CUSTOMER SERVICE
- 2. SAFETY INSTRUCTIONS
- Recommended Use
- Prohibited Use
- Preparation for work
- Protection Devices
- Arrest Functions
- Safe Use
- Residual Risks
- Before You Begin
- Operating Machine
- After Work is completed
- The Work Area
- Personal Protective
- Equipment (PPE)
- Operator
- 3. HANDLING AND TRANSPORTATION
- splitting the carriage from the mainhead
- LIFT THE MACHINE from working to tool mounting position
- Lifting
- Adjusting the handle
- Storage
- 4. OPERATION
- Preliminary Controls
- Water Flow Control Unit
- Adjusting and Mounting Tools
- The Control Board
- Starting the Machine
- Operating the Machine
- Stopping the Machine
- Alarm
- 5. TOOLS AND ACCESSORIES
- Weights
- Tool holder key
- Foam Plate
- Security plate for Quickchange pads
- 6. POPULAR TOOLS
- RECOMMENDED TOOLS
- Use Only Superabrasive’s Recommended Tools. For More Tooling Options, Visit www.superabrasive.com
- 7. MAINTENANCE AND INSPECTION
- Cleaning
- CHECK DAILY
- Check Every 200 Working Hours
- Check Every 400 Working Hours
- VACUUM
- WATER LEAKS
- MECHANICAL PARTS
- ELECTRICAL SYSTEM
- 8. TROUBLESHOOTING
- Index of Problems and Solutions
- 8.1 Replacing Power Cord and Plugs
- 8.2 DISMOUNTING AND MOUNTING TOOL HOLDER TO CHANGING V-RINGS AND FELT-RINGS
- 8.3 DISASSEMBLING AND MOUNTING TOOL HOLDER TO CHANGE BUFFERS AND ELASTIC ELEMENT
- 8.4 CORRECTING SAG OF THE USED PLANETARY CHAIN
- 8.5 Mounting new planetary CHAIN
- 8.6 Replacing the Planetary DRIVING Chain Wheel AND Planetary Tensioner
- 8.7 tensioning and replacing the belts
- 8.8 Replacing the Planetary driven Chain Wheel
- 8.9 replacing the pulley units
- 8.10 replacing the planetary unit
- 8.11 REPLACING PARTS FROM THE DRIVING OF THE CARRIAGE
- 8.12 Motor Connection
- 8.13 Fault diagnosis Inverter YASKAWA V1000
- 9. DISPOSAL
- 10. MANUFACTURER’S CONTACTS
- 11. SPARE PARTS
- ASSEMBLY AND PARTS SPECIFICATIONS
- 11. Lavina® 25LM-X Control Box Parts 200-240 Volt
- 12. Lavina® 25LMX-HV Control Box Parts 440-480 Volt