Guilin Zhishen Information Technology ZYSL Digital Camera Stabilizer User Manual 1 4 0
Guilin Zhishen Information Technology Co.,Ltd. Digital Camera Stabilizer 1 4 0
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3082685 |
| Application ID | 1mZVu3QA9mcqM4vUP/SKEA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 98.32kB (1229053 bits) |
| Date Submitted | 2016-08-01 00:00:00 |
| Date Available | 2016-08-01 00:00:00 |
| Creation Date | 2016-07-29 09:55:53 |
| Producing Software | Adobe Acrobat Pro 9.3.2 |
| Document Lastmod | 2016-07-29 09:56:30 |
| Document Title | 1-4.0.cdr |
| Document Creator | Adobe Acrobat Pro 9.3.2 |
| Document Author: | å®¶å¨ |
SlfiNIN~~IJ(_ User Manual ~~-r~ Zhiyun Disclaimers and warnings Shining User Manual Disclaimers and warnings Congratulations on purchasing your new Zhiyun product. Please read this manual and disclaimer carefully before using this product. By using this product, you hereby agree to this disclaimer and signify that you have read it fully. You agree that you are responsible for your own conduct and any content created while using this product, and for any consequences thereof. You agree to use this product only for purposes that are proper and in accordance with local regulations, terms and any applicable policies and guidelines. Do not modify or adjust the Shining. As Zhiyun has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed or accepted for any resulting damage or injury. By the using, setting up, or assembling of the product, the user accepts all resulting liability. Zhiyun assumes no liability for damages or injuries incurred directly or indirectly from the use of this product. You shall get product information and user manual through visiting the theme page of Shining in www.zhiyun-tech.com . Please check the latest manual according to the version number. If not, please download and use the latest one. Zhiyun shall not inform of the manual upgrade. If you meet some problems while setting up the product, please turn to the authorized agent or Zhiyun client service center for help. Zhiyun and Shining are registered trademarks of Zhiyun. All names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective owner companies. This product and manual are copyrighted by Zhiyun, with all rights reserved. No part of this product or manual shall be copied or translated in any form without permission. Using the manual Legend CD Important References or Definitions Summary Developed for filmmaking professionals, the Zhiyun Shining marks a generational leap forward in camera stabilization technology. The Shining is light, small and convenient to use. The technology built into the Zhiyun Shining allows a broad spectrum of cameras, of varying sizes and weights, to be stabilized during filming. A brushless gimbal stabilization system is not simply three brush less motors moving on three axes. Shining can processes movement calculation in milliseconds, which reduces angular vibration to less than ±0.05" of translated movement, meaning that the camera will remain perfectly steady. The Shining can be used in two operation modes: Locking Mode and Pan and Tilt Following Mode. Shining User Manual Shining Contents I, Disclaimers and Warnings II, Using the Manual Ill, Summary IV, Shining Introduction 1 .Shinning Features 2.Packing List 3.Shining Diagram V, Getting Started 1 . 18650 Li-ion Battery 2.Turning on the Shining 3.Assembling the Handle Bar 4.1nstalling Handle Bar onto the Gimbal 5.Mounting the Camera 6.Configuring the Handle Bar 10 VI, Balancing 1 .Balancing the Vertical Tilt 2.Balancing the Roll Axis 3.Balancing the Tilt Axis 4.Balancing the Pan Axis 5.Advanced Roll Adjustment 12 12 13 13 13 VII, Operation Modes 1 .Underslung Status 2.Upright Status 3.Briefcase Status 14 14 15 VIII, Maintenance of Gimbal 15 IX, Specifications 16 X, Technical Parameters 16 Features Shining User Manual Shinning Features 1 .The first professional gimbal with removable 18650 batteries, advanced protection technology from overdischarge, reverse and over-current. 2.Each motor, with the automotive grade magnetic encoders, brings precise sine wave FOG, and very smooth torque. 3. Quick, simple and tool-less camera mounting system saves time and effort. 4.Multiple 1/4 inch screw thread brings more convenience for auxiliary equipment. 5.The built-in wireless control module can be connected with Zhiyun's gimbal remote controller or smartphone APP which can also be used for wireless control and firmware upgrade. 6. The industry's first to achieve 32bX4 MCUs, running in parallel at 4k hertz. The number is far beyond the reach of any other gimbals. 7.9-axis IMU sensor, combined with Zhiyun's efficient attitude control algorithm and advanced servo control algorithm, the gimbal is able to sense, compute then control the camera to a 0.01-degree accuracy, within 0.25 millisecond. 8.Very broad load range (350g - 3600g), from Mirrorless to professional DSLR without parameter adjustment. 9.Advanced control method and clever roll space design, enter three status (underslung, upright and briefcase) without any settings, avoid over stress caused by camera reverse. 1O.Reserved external extended interface to meet future constantly increased accessories. Shining User Manual Packing List Gimbal x1 The Shining includes built-in Zhiyun motor drive modules, USB port, an external interface port, a 32-bit DSP processor, a battery protection module, a built-in wireless module, a built-in independent IMU module. Handle Bar x1 Customizable handle bar for the gimbal. The handle bar is assembled from five parts, including a top handle, two handle bars and two grips. Li-ion Battery Charger x2 Customized for 18650 Li-ion Battery. 18650 Li-ion Battery x8 Capacity:2000mAh Battery Storage Box x2 For 18650 Li-ion batteries. ..·. ,,~oc·.·. Shining User Manual Micro-USB Cable x2 For upgrade and batteries charge. Camera Mounting Plate x1 For mounting your camera onto the gimbal. Accessories Package Camera Screw A (1 /4") x2 Camera Screw B (3/8") x2 Camera Screw C (1 /4") x2 Camera Screw D (3/8") x2 Lens Support x1 Lens Support Screw x1 3 mm Allen Wrench x1 6 mm Allen Wrench x1 Certificate of Quality x1 IT ;) User Manual x1 Warranty Card x1 Dlegrem Shining UMr llenuel Shining Diagram [16] 1.1/4 Screw thread 2.3/8 Screw thread 3. Top Handle Bar 4.Side Handle 5.Quick Release Mount 6.Pan Motor 7.Pan Aqjustment Slider 8.USB Port 9.Power Button 1O.Batteries compartment 11.Roll Motor 12.TIIt Motor 13.Fore and Aft Adjustment 14.Tilt Vertical Adjustment 15.Roll Adjustment 16.Extended Function Interface [15) Shining Uaer llanual Getting Started 18650 Li-ion Battery Zhiyun 18650 Li-ion battery was specially designed for the Shining. Before you start using your Shinning, be sure to charge the battery with Zhiyun approved charger. When the 18650 Li-ion batteries are fully charged, the Shining has a maximum run-time of six hours. (When installing the batteries, please note the cathode and anode.) Power Protection Over-Discharge Protection Discharging stops automatically when the battery voltage reaches 3.0V, preventing over-discharge damage Short-Circuit Protection Automatically cuts power supply when a short circuit is detected Zhiyun 18650 Li-ion Battery Specifications Type Li-ion Capacity 2000mAh Charging Environment Temperature o· Operating Environment Temperature -10-40' c Charging/Discharging Environment Relative Humidity <8096 c-40' c Note: be sure that every battery is fully charged in the right way, any battery voltage lower than 3.0V cannot run the gimbal. o Always use Zhiyun approved chargers. Zhiyun takes no responsibility for any consequences resulting from the use of non-Zhiyun approved chargers. Turning on the Shinning Press the Power button, Shining enters standby mode. After about seven seconds, Shining starts to work. The default mode is Following Mode. Shining User Manual Getting Started Assembling the Handle Bar l.Adjust the handle bar to the angle you need, then tighten the screw. If a re-adjustment of the angle is needed, loosen the screw and pull the handle in radial direction, when the angle is proper, tighten the screw again. 2.Attach the handle bars to both sides of the top handle and tighten the grip screws. 3.Attach the grips to the handle bar and lock them in the preferred position. -- Getting Started Shining User Manual Installing Handle Bar onto the Gimbal 1.Piace the handle bar in position as shown below, then slide it horizontally into the gimbal and tighten the lock-knob. 2.Hold the gimbal by the grips, make sure that the gimbal is not obstructed during a 360 degrees pan. The installation is complete. Mounting the Camera The Shining uses an adjustable camera mounting plate that allows you to easily balance, install and remove the camera.The Shining has been tested with the following types of cameras. Other cameras similar in size and weight may also be compatible. Black Magic Cinema Camera Canon 50 MK Ill Nikon 0800 Black Magic Pocket Cinema Camera Canon 60 Panasonic GH3 Canon 1 De Canon 70 Panasonic GH4 Canon 50 MK II Canon C100 Sony a 7 series CD 1. Make sure the g1mbal IS not turned on when mountmg the camera. 2. Camera Size Requirements: The maximum depth from the center of gravity on the camera base plate is 120 mm. The maximum width is 169 mm as shown in the image to the right. The maximum height, measured from the top of the camera base plate, is 187 mmas shown in the image to the right. 3. To avoid obstructing camera movement, the use of soft connection cable is recommended. 1.Attach the camera mounting plate to your camera using the provided camera screws A,B,C or D. Camera screws A and B only fit the holes of the mounting plate, while the camera screws C and D only fit the slot of the mounting plate. Be sure to use the correct 1 /4" or 3/8" screws. Secure the camera as firmly as possible. Some cameras have two tripod mounting holes. If two mounting holes are available on your camera, use them both. Choose the correct screw holes, according to your camera's configuration. 2.1nstall the lens support by gently pushing it up, so that it is applying light pressure to the lens. Then tighten the thumbscrew. Shining User Manual Getting Started Why do you need a lens support? Certain cameras have a very tight lens securing system, and some cameras such as the Canon 50 MK II and MK Ill have very loose lens securing systems. The Shining balances the camera as one solid unit. If the mounted camera has a loose lens securing system, the lens support must be used. This is because a loose connection between the lens and the camera body may allow vibrations that travel through to the camera but not directly to the lens, resulting in the two masses shaking at different frequencies. The resulting oscillations will be transmitted to the IMU, causing the whole gimbal to shake. If the lens support fits, it's best to use it at all times. CD · The lens support can be installed facing outward or inward to accommodate different lens types. · Ensure alignment of the camera plate and then tighten the mounting screw, before tightening the lens support. 3.With the gimbal facing outward on the tuning stand, slide the mounting plate into the receiver until the safety lock engages. Make sure the gimbal is not turned on when balancing the camera. 4.When the camera achieves a rough balance, tighten the camera base side clamp. You can adjust the tightness of the clamp with an Zhiyun Allen Wrench. Configuring the Handle Bar The customized handle bar of the Shining can be removed. If necessary, by following the steps below. l.Loosen the two grip screws where the handle bar meets the gimbal, as shown. GeHing Started Shining User Manual 2.Remove the grips from the handle bar. 3.You can remove one or both sides of the handle bar. 4.The resulting configuration is shown below. Balancing To obtain the best performance from the Shining, proper balancing is a must. Accurate balance is critical for shots where the Shining will be subjected to extreme movements or acceleration (running, horseback riding, biking, car mounts, helicopters, etc.). proper balance will also offer a longer battery runtime. There are three axes that need to be accurately balanced prior to turning on the Shining and setting up the software. CD • The camera needs to be fully configured, with all accessories, prior to installing and balancing the camera on the gimbal. If the camera has a lens cap, be sure to remove it prior to balancing. • Be sure that the Shining's power is turned off while balancing the camera. Shining User Manual Step 1: Balancing the Vertical Tilt 1 .Rotate the Tilt Axis so that the camera lens is pointing upward and loosen the two vertical adjustment tabs. 2.Gently slide the camera mount crossbar forwards or backwards until the camera points upwards when released. 3.Tighten the tabs and manually rotate the assembly, simulating tilt, to ensure there is no binding in the tilt motor. When proper balance is achieved, you can rotate the camera to any tilt angle, and it will stay in that position. CD Ensure the measurement marks match up on either side of the vertical bars. If they do not match up, the assembly could possibly be skewed higher or lower on one side, which would cause the tilt motor to bind. Step 2: Balancing the Roll Axis 1 .Loosen the two lock-knobs to allow the camera and mounting plate to slide left and right. 2.Siide the camera left or right until the Roll Axis remains level. 3.Tighten the two lock-knobs to lock the camera mounting plate in position. CD When adjusting the roll balancing position of the camera, only loosen the two lockknobs a few turns to allow the camera base to slide. Do not loosen the lock-knobs excessively. Shining User Manual Step 3: Balancing the Tilt Axis 1 .Loosen the camera base's side clamp to allow the camera and mounting plate to slide forwards and backwards. 2.Siide the camera forwards or backwards until the tilt axis remains level. Only very small adjustments are required to achieve the proper balance. 3.Tighten the side clamp to lock the camera and mounting plate in position. If properly balanced, the camera should be able to remain steady at any given tilt angle. Step 4: Balancing the Pan Axis 1 .Loosen the clamp on the pan axis via 3mm allen wrench and turn the knob to slide the assembly. Identify if the Shining is front heavy or rear heavy. 2.While the Shining is resting on the tuning stand, try rotating the Shining along the pan axis by lifting one side of the handle bar. If the camera does not swing, the pan axis is properly balanced. Tighten the clamp after balancing is complete. Note: it is normal that the rotary knob still can rotate after tightening the screw. Advanced Roll Adjustment If additional roll adjustment is needed in cases where the camera itself is too light in comparison to the tilt motor assembly, advanced roll adjustment can be achieved by loosening the indicated screws and pushing the assembly to the right or left. Shining User Manual Operation Modes The Shining can be used in two operation modes: Pan and Tilt Following Mode and Locking Mode. You can change to the Underslung Status, Upright Status and Briefcase Status at any mode. Note: modes only can be switched by using Zhiyun wireless controller or Zhiyun APP(Zhiyun Assistant). Underslung Status The Underslung Status is the default working status. Upright Status Flip the gimbal forward 180 degrees and it will automatically change to Upright Status. Alternatively, you can change the gimbal into upright status before turning it on. Upright Status is ideal for car mounts or other top down perspective camera positions, as it allows you to shoot higher and/or at eye level. Maintenance Shining User Manual Briefcase Status Briefcase Status allows you to hold the Shining in a narrow space , makes camera more flexible while shooting. To use Briefcase Status, tilt the gimbal go· to the left or right on the roll axis. Maintenance of Gimbal l.Balance the handle bar and keep the gimbal flat. (When putting the gimbal upside down, please ensure the ground is flat and the top handle bar should be down, otherwise the gimbal may fall forward and overturn.) 2.The electronic gyroscope initialization or acceleration sensor calibration may be required in the following circumstances: 1) .If there is deviation in the starting angles on roll or tilt. 2).lf the gimbal has not been used for a long period of time. 3).lf the temperature of the operating environment has changed considerably since the gimbal was last calibrated. 3.Refer to "Zhiyun Gimbal Tools" or Zhiyun Assistant to get the method of calibration. When the batteries are not in use, please have them fully charged and put in dedicated storage box and prevent them from water, moisture and high temperature. Shining User Manual Product Parameter Specifications General Built-in Functions • Zhiyun motor drive modules ·Two Operation Modes • 32-bit DSP processor Pan and Pitch Following Mode • Battery protection module • USB connection Locking Mode • Built-in wireless module • External extended interface • Built-in independent IMU module Dimension 520 mm(W) x 260 mm(D) x 420 mm(H) Camera Tray Dimensions Maximum depth from the center of gravity on camera base plate: 120 mm Maximum height measured from top of the camera base plate: 187 mm Maximum width: 169 mm PC/MAC Assistant Windows XP SP3 or above; Mac OS X 10.9 or above Software Requirements Mobile Assistant iOS 7.0 or above; Android 4.3 or above; Support for Bluetooth 4.0 or Software Requirements above Micro USB Port For firmware upgrade, parameter adjustment and advanced calibration. Please refer to the Shining User Manual and Software Instruction. Technical parameters Minimum Standard Maximum Note 4S 4x 1 8650 batteries Operating current 110mA 300mA 6A Extended interface output voltage 14.0V 14.8V 16.8V Input voltage Extended interface output current 3A Static attitude tracking accuracy ±0.01" ±0.03" Dynamic attitude tracking accuracy ±0.05" ±0.2" Tilt axis mechanical movement range -11 Roll axis mechanical movement range -65" Pan axis mechanical movement range Tilt axis controlled rotation range -11 Roll axis controlled rotation range -25" o· o· +185" +245" 360" +185" +25" Product Parameter Pan axis controlled rotation range 360" +25" Tilt axis following rate 1" /S 50" /S Pan axis following rate 1" /s ao· /s Load Weight capacity (reference value) 350g 3.6kg Battery run-time(25"C) 6h -10"C 25"C 45"C 3.1 kg Operating temperature Gimbal weight Shining Uaer Manual 2000mAh*4 (Gravity balanced) With batteries Federal Communication Commission (FCC) Radiation Exposure Statement When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. FCC statements: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : 家威 Create Date : 2016:07:29 09:55:53+08:00 Modify Date : 2016:07:29 09:56:30+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2016:07:29 09:56:30+08:00 Creator Tool : Adobe Acrobat Pro 9.3.2 Format : application/pdf Title : 1-4.0.cdr Creator : 家威 Document ID : uuid:a8bd9dde-b9a1-42b3-a47f-5f5b9fc798e2 Instance ID : uuid:4c395523-35c3-4a26-9e95-ef3bba74df23 Producer : Adobe Acrobat Pro 9.3.2 Page Count : 19EXIF Metadata provided by EXIF.tools