Guillemot 4660306D Wii Wireless Nunchuck Adapter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1033694
Application ID	F0k91iUDrOKCycAn7LYDWQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	69.72kB (871444 bits)
Date Submitted	2008-11-21 00:00:00
Date Available	2008-11-21 00:00:00
Creation Date	2008-11-05 17:02:45
Producing Software	pdfFactory v1.57 (Windows XP Chinese)
Document Lastmod	0000-00-00 00:00:00
Document Title	User manual.pdf
Document Creator	pdfFactory http://www.pdffactory.com
Document Author:	cee3

User Guide
Wii Wireless Nunchuk Adapter
Introduction
Before operating the Wireless Racing Wheel, please read this Manual thoroughly,and retain it for future
reference.
Unleash your Wii Remote 81 Nunchuk. . .Go Wireless!
Transform your existing Wii Remote and Nunchuk into wireless gaming weapons! This Wireless
Nunchuk Kit allows you to play your favorite Wii games without being limited by the Remotefto—Nunchuk
cable.
Features
. Allows user to play favorite Wii games without being limited by the Wiimote-to-Nunchuk cable
‘ Auto Battery Save function (Sleep mode)
. An integrated Signal Lock Indicator lets the user know when it is connected, synched and ready
to go
. RF transmission distance is around 5 meters
' Auto connect function
. 4-player compatible
. Powered by 2 AAA batteries (not included) which providearound 55 hours of non-stop gaming
. ISM frequency: 2.4OZGHz~2.478GHz
Product Overview
Receiver Wireless Nunchuk Housing
Plug to Wiimote
Signal Lock Indicator
CONN ECT button
Setup
- Remove the top cover aid battery compartment cover of the Wireless Nunchuk Housing, Connect
the Nunchuk plug to the Wireless Nunchuk Housing following the below photo instruction.
- Properly mount the Nunchuk into the Nunchuk shell of the Wireless Nunchuk Housing and insert the
top cover.
/ " -
. Insert 2 AAA batteries into the battery compartment of Wireless Nunchuk Housing observing the
correct polarity (4+). Insert and close the battery compartment cover.
Connection
Turn on WII console, synch the Wiimote. Simply snap the wireless receiver to the bottom of the Wiimote
Signal Lock Indicatoron receiver begin to flash. Press CONNECT button onWireless Nunchuk Housing, the
CONNECT LED begins flashing. The connection is established automatically and your Wireless
Nunchuk Adapter is functional. You can continually press button C and button Z, the Signal Lock
Indicator will illuminate implying the connection is established.
Functions description
- After you have set up your Wireless Nunchuk Housing and insert the batteries into the battery
compartment of Wireless Nunchuk Housing, the CONNECT LED on housing Will flash once and
enter sleep mode after (CONNECT LED is off) press CONNECT button on Wireless Nunchuk
Housing to detect available receiver. It will enter sleep mode after ‘lO seconds of no receiver
detected.
- When the connection have been established With one current receiver, you intend to connect the
Wireless Nunchuk Housing to another receiver, Please press and hold CONNECt button for 4
seconds, it will begin to detect another available receiver and automatically connect. If it cannot
connect to the receiver within 10 seconds, it Will enter sleep mode. Press CONNECt button again to
reconnect to origin receiver.
- Auto Battery Save function:
a) The Wii Remote(TM) automatically goes into standby mode after 5 minutes of inactivity. This
results in automatically switching off the Wireless Nunchuk Adapter. To wake the 2 controllers
back up again, press the A button on the Wii Remote(TM), then press the CONNECT button on
the Wireless Nunchuk Housing,
b) The Wireless Nunchuk Housing failed to connect to the receiver. It Will enter sleep mode. Press
CONNECT button to wake it.
c) The Nunchuk’s connector is improperly connected or doesn't connect to the Wireless Nunchuk
Housing. The Wireless Nunchuk Housing Will enter sleep mode in 30 seconds. Press
CONNECT button to Wake it.
- Low Power Indicator
The LED on the CONNECT button flashes quickly and continuously when the batteries are too
weak. Replace the used batteries with new batteries.
SUMMARY
- CONNECT LED + Signal Lock Indicator FLASH ALTERNATELY— Wii Wireless Nunchuk Adapter is
connected and functional.
- CONNECT LED FLASHES 10 seconds, then off- The connection with the receiver failed or was
interrupted. Enter sleep mode
. CONNECT LED OFF- Wii Wireless Nunchuk Adapter is off
- CONNECT LED FLASHES quickly 30 seconds, then off- The Nunchuk(TM)’s connector is mt
connected to the Wireless Nunchuk Housing
- CONNECT LED FLASHES quickly and continuously- Your Wireless Nunchuk Adapter's batteries
are weak.
User Manual information:
FCC Part 15 Section 15.21 Information to user
The users manual or instruction manual for an intentional or unintentional radiator shall caution the user
that changes or modifications not expressly approved by the pai1y responsible for compliance could
void the user's authority to operate the equipment. In cases where the manual is proVided only in a form
other than paper, such as on a computer disk or over the Internet, the information required by this
section may be included in the manual in that alternative form, provided the user can reasonably be
expected to have the capability to access information in that form.
NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODlFlCATIONS TO THIS EQUlPMENT SUCH MODlFICATIONS COULD VOlD THE USER
AUTHORITY TO OPERATE THE EQUlPMENT
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital deVice,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment offand on, the user is encouraged to try to correct the interference
by one or more of the followmg measures:
—— Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Title                           : User manual.pdf
Author                          : cee3
Creator                         : pdfFactory http://www.pdffactory.com
Producer                        : pdfFactory v1.57 (Windows XP Chinese)
Create Date                     : 2008:11:05 17:02:45
Page Count                      : 4

EXIF Metadata provided by EXIF.tools