Guoguang Electric VIFANORDIC1 Bluetooth Speaker User Manual

Guoguang Electric Co.,Ltd Bluetooth Speaker Users Manual

Users Manual

Download: Guoguang Electric VIFANORDIC1 Bluetooth Speaker User Manual
Mirror Download [FCC.gov]Guoguang Electric VIFANORDIC1 Bluetooth Speaker User Manual
Document ID2846544
Application IDYijG9WE2ZvvIlsdGvbStcw==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize60.79kB (759886 bits)
Date Submitted2015-12-18 00:00:00
Date Available2016-06-15 00:00:00
Creation Date2015-11-02 11:23:38
Producing SoftwareAdobe PDF Library 15.0
Document Lastmod2015-11-02 11:23:41
Document TitleUsers Manual
Document CreatorAdobe InDesign CC 2015 (Windows)

1115_Vifa_Oslo_Manual_REV1.indd 1
OSLO
Owner’s Manual
02-11-2015 11:23:3
IMPORTANT SAFETY INSTRUCTIONS
Regulatory Safety Information
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings.
Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat.
Do not defeat the safety purpose of
the polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If
the provided plug does not fit into your
outlet consult an electrician for replacement of the obsolete outlet.
10
Make sure the power cord is not stepped
on or otherwise interferred with, particularly at the mains socket and where it
exits the apparatus.
11
Only
use
attachments/accessories
specified by the manufacturer.
12
Use only with the cart, stand,
tripod, bracket or table specified by the manufacturer or sold
with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid injury from
tip-over.
1115_Vifa_Oslo_Manual_REV1.indd 2
13
Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14
Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in
any way, such as damage to the power
cord or plug, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally
or has been dropped.
15
To completely disconnect unit power
from the AC mains, disconnect the unit’s
power cord from the mains socket.
WARNING:
•
•
•
To reduce the risk of fire and electric
shock do not expose this apparatus to
rain or moisture.
Do not place objects filled with liquids
such as vases on the apparatus.
Do not open the appartus. There are no
user-serviceable parts inside. Risk of
electric shock inside.
The lightning flash and arrow head
within the triangle is a warning sign
alerting you of dangerous voltage
inside the product.
The exclamation point within the
triangle is a warning sign alerting you to important instructions
accompanying the product.
02-11-2015 11:23:3
IMPORTANT STATEMENTS
This device complies with Part 15 of the FCC
Rules. Its operation is subject to the following
two conditions:
1.	This device may not cause harmful interference, and
2.	This device must accept any interference
received, including interference that may
cause undesired operation.
Cet appareil est conforme à la section 15 des réglementations de la FCC. Le fonctionnement de
l’appareil est sujetaux deux conditions suivantes:
1.	
Cet appareil ne doit pas provoquer
d’interférences néfastes, et 2. Cet appareil doit tolérer les interférences reçues, y
compris celles qui risquent de provoquer
un fonctionnement indésirable.
Note: This product has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This product generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this product does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
·	Reorient or relocate the receiving antenna.
·	
Increase the separation between the
equipment and receiver.
·	Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
·	Consult the dealer or an experienced radio/
TV technician for help.
1115_Vifa_Oslo_Manual_REV1.indd 3
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
This device complies with Industry Canada
licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2.	This device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR
d’Industrie Canada applicables aux appareils
radioexempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1.	
l’appareil ne doit pas produire de brouillage, et
2.	l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
Vifa Denmark A/S
Mariendalsvej 2A
DK-8800 - Denmark
www.vifa.dk
02-11-2015 11:23:3
Product Care................................................................................... 6
Oslo Functions
Buttons and indicators on Oslo....................................................... 8
Mode button & Status indicator...................................................... 9
Battery charge...............................................................................10
Connecting to Oslo
Connecting with Bluetooth............................................................12
Connecting with Bluetooth - NFC .................................................13
Wired connection .........................................................................14
Troubleshooting
Factory Default..............................................................................16
Oslo Reset.....................................................................................17
Specifications................................................................................19
Support ........................................................................................ 20
Trademarks................................................................................... 21
For manuals in other languages please visit www.vifa.dk/support
1115_Vifa_Oslo_Manual_REV1.indd 4
02-11-2015 11:23:3
You’ve chosen well
Vifa Oslo. A loudspeaker for anyone who values exclusive
Nordic design and authentic sound.
Designed to be intuitive for you to use, this manual just
spells out the details - for instance, how to connect
wirelessly in a flash.
1115_Vifa_Oslo_Manual_REV1.indd 5
Enjoy!
02-11-2015 11:23:3
PRODUCT CARE
Oslo is built for a long-lasting relationship. In order to ensure the
quality music performance please ensure no exposure to rain,
moisture, high humidity or sources of heat that may damage the
product. The intended use is within a temperature range of
5 - 40 °C (40 - 105 °F).
Cleaning
Your Vifa product is covered by beautiful highly durable textile from
Kvadrat. Remove non-greasy stains by carefully dabbing with a
lint-free cloth or use a lint roller to remove lint from the textile.
Never use a vacuum cleaner, this can cause damage to the
loudspeaker units behind the textile.
1115_Vifa_Oslo_Manual_REV1.indd 6
02-11-2015 11:23:3
OSLO
FUNCTIONS
1115_Vifa_Oslo_Manual_REV1.indd 7
02-11-2015 11:23:3
BUTTONS AND INDICATORS ON OSLO
TM
NFC area
Status indicator
Volume up
Volume down
Power socket, battery charge
USB service
Aux analog input
Battery indicator, Reset
MODE button
1115_Vifa_Oslo_Manual_REV1.indd 8
02-11-2015 11:23:3
MODE BUTTON & STATUS INDICATOR
Turn Oslo ON
Press and hold the MODE button until the status indicator turns
solid YELLOW.
Turn Oslo OFF
Press and hold the MODE button until the status indicator flashes
YELLOW. Then release.
Oslo SLEEP mode
If no signal input or no button is being pressed for 3 minutes, Oslo
goes into SLEEP mode, meaning the status indicator will pulsate.
Status Indicator
BLUE - Bluetooth connection
GREEN - AUX connection
RED - Fault indications
YELLOW - No connections active
1115_Vifa_Oslo_Manual_REV1.indd 9
02-11-2015 11:23:3
BATTERY CHARGE
A full charge will take 3-4 hours. Please charge Oslo for more than
4 hours the first time you charge it. Keep Oslo plugged in when
near power outlet. The intelligent power management will keep
battery in perfect condition.
When charging you can see the progress,
Low
Battery level below 5% RED
Medium
Battery level between 5 and 80% YELLOW
Full
Battery level above 80% GREEN
10
1115_Vifa_Oslo_Manual_REV1.indd 10
02-11-2015 11:23:3
CONNECTING TO
OSLO
1115_Vifa_Oslo_Manual_REV1.indd 11
02-11-2015 11:23:3
CONNECTING WITH BLUETOOTH
14:52
Bluetooth
Bluetooth
VIFA_BTxxxx
Paired
1.
To turn Oslo on, press and hold the MODE button until
status indicator turns on.
2.
Press and hold the MODE button until status indicator
flashes BLUE.
3.
Enable Bluetooth pairing on your device and select Vifa
BTxxxxxx as your Bluetooth device.
4.
The status indicator turns solid BLUE when a connection is
established. Let the music play.
12
1115_Vifa_Oslo_Manual_REV1.indd 12
02-11-2015 11:23:4
CONNECTING WITH BLUETOOTH - NFC
Only for NFC enabled devices
TM
NFC AREA
NFC
NFC
1.
To turn Oslo on, press and hold the MODE button until
status indicator turns on.
2.
The NFC area of Oslo is placed by the volume buttons.
3.
Activate NFC function on your device. Place NFC enabled
device on NFC area and accept pairing on your device.
4.
The status indicator turns solid BLUE when a connection is
established. Let the music play.
1115_Vifa_Oslo_Manual_REV1.indd 13
13
02-11-2015 11:23:4
WIRED CONNECTION
1.
To turn Oslo ON press and hold the MODE button until
status indicator turns on.
2.
Connect the wire on the back side and start music playback
from your device.
3.
The status indicator turns solid GREEN when wired playback is
enabled.
Oslo prefers Bluetooth over AUX. But briefly pressing the MODE
button the connection will switch from Bluetooth to AUX.
Pressing it again turns it back to normal priority.
14
1115_Vifa_Oslo_Manual_REV1.indd 14
02-11-2015 11:23:4
TROUBLESHOOTING
1115_Vifa_Oslo_Manual_REV1.indd 15
02-11-2015 11:23:4
FACTORY DEFAULT
Factory default
Resets Oslo’s software to factory settings
To factory default Oslo, press and hold the MODE button and the
volume up and volume down buttons simultaneously until the
status indicator turns red.
Release the buttons and Oslo will go to factory default. Please note
that after factory default ALL USER SETTINGS WILL BE LOST.
To update Oslo’s firmware, please go to www.vifa.dk/support for
further information.
16
1115_Vifa_Oslo_Manual_REV1.indd 16
02-11-2015 11:23:4
OSLO RESET
Reset
Reset
May be used if Oslo freezes.
To reset Oslo, briefly press the reset button - no user settings will
be lost.
If you experience issues that are not described in this manual, please
refer to www.vifa.dk/support
1115_Vifa_Oslo_Manual_REV1.indd 17
17
02-11-2015 11:23:4
1115_Vifa_Oslo_Manual_REV1.indd 18
02-11-2015 11:23:4
SPECIFICATIONS
Description
Portable wireless loudspeaker
Technical features
Bluetooth 4.0 aptX
AUX 3.5 mm mini-­‐jack
NFC
Lithium Ion battery
Force Balanced Woofers
DSP crossover, optimized for low distortion
and high precision
4 channel digital PurePath amplifier
Drive Units
Full-range
2 X 50 mm Vifa driver unit with aluminum
cone and neodymium magnet
Woofer
2 x 65 mm Vifa drive units with flat
sandwich cone and neodymium
magnet. Mounted mechanically back
to back in a force balanced configuration
supported by 2 passive radiators.
Frequency response
55 Hz – 18 kHz @ +/-­‐ 3 dB
Input voltage, wall adaptor
100 Volt - 240 Volt 50/60 Hz 1500mA Max
Input voltage, loudspeaker
Standby power consumption
18VDC,2500mA
Less than 0.5 watt when battery is
fully charged.
Inputs
Bluetooth aptX
AUX 3.5 mm mini-­‐jack.
Dimensions Height/Width/Depth
Net weight
Frame
Enclosure
Grilles
268 mm / 181 mm / 90 mm
2,4 kg
One piece diecast aluminium
Reinforced ABS
Custom made Kvadrat textile
1115_Vifa_Oslo_Manual_REV1.indd 19
19
02-11-2015 11:23:4
SUPPORT
Vifa App
An app will be available for your Vifa Oslo.
More info will be announced on www.vifa.dk/support
Register your Oslo
We encourage you to register your product at www.vifa.dk/support
20
1115_Vifa_Oslo_Manual_REV1.indd 20
02-11-2015 11:23:4
TRADEMARKS
A Vifa product is in compliance with
directives of relevance, including RoHS
directive – Vifa declaration of conformity can be found and downloaded from:
www.vifa.dk/support - see product label for more regional regulatory approvals.
The NFC Forum has developed the “N-mark” trademark as a universal
symbol for Near field communication.
The Bluetooth logo, the Bluetooth name and the combination are
trademarks owned by Bluetooth SIG Inc.
© 2013 CSR pic and its group companies. The aptX® mark and the
aptX logo are trade marks of CSR pic or one of its group companies
and may be registered in one or more jurisdictions.
1115_Vifa_Oslo_Manual_REV1.indd 21
21
02-11-2015 11:23:4
2015 11 REV.1
For more information please visit our website at
1115_Vifa_Oslo_Manual_REV1.indd 22
www.vifa.dk
02-11-2015 11:23:4

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c067 79.157747, 2015/03/30-23:40:42
Create Date                     : 2015:11:02 11:23:38+01:00
Metadata Date                   : 2015:11:02 11:23:41+01:00
Modify Date                     : 2015:11:02 11:23:41+01:00
Creator Tool                    : Adobe InDesign CC 2015 (Windows)
Instance ID                     : uuid:1eea02e6-083f-410a-b357-4f8eb2f18d09
Original Document ID            : xmp.did:0E612CB36A0DE311924EC39E07416973
Document ID                     : xmp.id:69bf357c-4ff6-394f-a949-8fa3c30a6960
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:bfc0b457-a008-4e44-b2bd-df406575c8a6
Derived From Document ID        : xmp.did:f7a9a907-0c22-b44e-ae7e-64e9b29640bc
Derived From Original Document ID: xmp.did:0E612CB36A0DE311924EC39E07416973
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Windows)
History Changed                 : /
History When                    : 2015:11:02 11:23:38+01:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 22
Creator                         : Adobe InDesign CC 2015 (Windows)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AAP8-VIFANORDIC1

Navigation menu