HAICOM Electronics HI406B Bluetooth GPS receiver User Manual Exhibit E User Manual Part 1 pd

Download:
Mirror Download [FCC.gov]
Document ID	610849
Application ID	BMkKjh1OVpQ3+/gG0RoWFg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	114.16kB (1427032 bits)
Date Submitted	2005-12-13 00:00:00
Date Available	2005-12-12 00:00:00
Creation Date	2005-12-09 18:18:30
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2005-12-13 11:27:30
Document Title	Exhibit-E-User_Manual_Part 1.pd.PDF
Document Creator	PScript5.dll Version 5.2
Document Author:	HZhao

HI-406BT
Bluetooth GPS receiver
Table of Contents
1.1 Overview ...........................................
1.2 Main Features .....................................
2.1 Setting up: Bluetooth GPS receiver ........
3. Dimensions .......................................... 11
4. Packaging
4.1 Standard Packaging .............................. 12
4.2 Optional Packaging ............................... 15
5. System Specifications ............................. 19
6. Get Connected; Installation Guide
6.1 Laptop PC Installations ........................ 22
6.2 PDA Installations ................................. 25
1.1 Overview
Introduction
HI-406BT is a GPS (Global Positioning System)
receiver in wireless Bluetooth interface with buildin active antenna and extra digital compass
functions. With HI-406BT, your mobile devices, such
as, Smartphone, PocketPC, laptopPC, tabletPC, etc.
can receive GPS data wirelessly and perform the
GPS applications, such as, car navigation, personal
navigation, route planning, tracking, etc.
Equipped with the most powerful and ultra high
sensitive SiRF StarIII chip set, HI-406BT can get the
3D fix in very short time and under poor reception
environment, such as in the middle of the car, next
to the tall building, in your backpack, or pocket.
1.2 Main Features:
• 20 Channels "All-In-View" Tracking
• Position accuracy of 10 meters 2D RMS
• Cold/Warm/Hot Start Time: 42/38/1 Seconds
(Signal Strength > 30 dB-HZ)
• Reacquisition Time: 0.1 seconds
• Support Standard NMEA-0183 at 19200 bps baud
rate (Defined by customer 4800 up to 57600)
• Support Power Saving Mode
• Compatible with Bluetooth devices with Serial
Port Profile (SPP)
• Superior Sensitivity for Urban Canyon and Foliage
Environment
• Ultra small, sleek, and lightweight design easily
fits in your hand
• Li-polymer battery lasts for more than 8 hours of
use in connection
2.1 Setting up:
Bluetooth GPS receiver
STEP 1:
Open the battery cap and put the battery (406-BTT)
into the battery compartment.
Push down
and pull out
STEP 2
Connect the AC charger to home
electronics outlet or connect the inclusive DC
charger to the car cigarette lighter. As soon as they
connected, the solid amber light on the right side in
front of HI-406BT will turned on (stay on) meaning
the battery charging.
AC charger to home
electronic outlet
DC charger to car cigarette
lighter (DC 12V~24V)
Mini-1394
MMCX external antenna plug
female
connector for power in and GPS signal out
STEP 3
As soon as the battery fully charged, the amber light
will turned off, then, unplug the charger.
Indicator for
power charging
and GPS status
Indicator for
battery low (Red)
and Bluetooth
status (Blue)
STEP 4
There is switch on side of HI-406BT. The switch on
the right side is for Bluetooth GPS receiver.
As soon as turn on the switch on the side, the GPS
receiver will start to function and search the
satellites. Meanwhile, the LED indicator on the right
side in front of HI-406BT will turned green (stay on
- the GPS receiver not get 3D fixed yet) Please
make sure place the HI-406BT outdoor open space
so that it can get the proper satellite signal. After
HI-406BT gets enough satellite data (lock more than
4 satellites), HI-406BT is in 3D fixed and the green
light start blinking.
Bluetooth GPS Switch
LED indicator
color
Status
Amber
LED off
Green (blinking)
Green (Stay on)
HI-406BT battery charging
HI-406BT battery fully charged
GPS in 3D fixed
GPS searching more satellite and
not in 3D fixed yet
Blue (blinking)
Blue (stay on)
Red
Bluetooth searching host device
Bluetooth paired and connected
HI-406BT battery low
STEP 5:
As soon as turn on the switch on the right side, the
Bluetooth will also start to function and searching.
The blue light on the left side in front of HI-406BT
will turned on (Blinking) meaning the Bluetooth is
searching the host device and not get paired yet.
Please consult the Bluetooth step by step
connection guide from this manual on section. The
pin code is " 0000 " when asked the pin code. After
the Bluetooth paired and connected, the blue light
will stay on.
STEP 6:
Open the mapping software from your mobile
device, select the corresponding COM port and start
GPS.
STEP 7:
Enjoy the state of the art wireless GPS navigation.
10
3. Dimensions
Unit: mm
Top View
Button View
64.80
46.40
Side View
Front View
Back View
24.00
11
4. Packaging
4.1 Standard Packaging:
Model Name
model#
1 Bluetooth GPS receiver
HI-406BT
2 Rechargeable Li-Polymer
406-BBT
3.7V 1000 mAh battery
3 Mini1394 to USB cable
401-USB
4 Cigarette lighter adaptor
USB-DCC
with USB female plug
5 Carrying pouch
BAG-002
6 HI-406BT user manual
MAU-406
7 Mini CD
CDR-01
12
2
13
5
14
4.2 Optional Packaging:
Model Name
1. MMCX external antenna
2. mini-1394 to PS/II connecting cable
3. AC power adaptor with USB female plug
model#
ANT-MMC
PS2-1394
USB-ACC
ANT-MMC
PS2-1394
USB-ACC
15
MMCX antenna
Under blocking area, the external antenna can
extend the signal reception from HI-406BT
16
PS2-1394
By connecting to different optional connecting
cables, HI-406BT can be a wired PS/II GPS receiver
and used with all kinds of mobile devices.
17
HI-406BT as a GPS mouse
By counecting different optional counecting cables,
HI-406BT can be all kinds of wired GPS receiver
solutions.
18
5. System Specifications
Main Features
GPS
General
Chipset
SiRF Star III
Channel
Supports 20-channel
Frequency
L1 (1575.42MHz), CA code
TTFF (Open Sky)
Hot Start
8 sec.
Warm Start
38 sec.
Cold Start
42 sec.
Acquisition Sensitivity
Hot
17dBHz
Warm
23dBHz
Cold
30dBHz
Tracking Sensitivity
-159dBm
Position Accuracy
10m, 2D RMS
Dynamic Conditions
Altitude(Maximum)
18,000m (60,000ft)
Velocity(Maximum)
515m/sec(1,000knots)
Acceleration(Maximum) <4g
19
Bluetooth
General
Frequency
Modulation Method
Max. Data rate
Transmission Power
(Maximum)
Hoping
Receiving Signal Range
Receiver IF Frequency
Baseband Crystal OSC
Compliant
2400MHz to 2483.5MHz
GFSK, 1Mbps, 0.5BT Gaussian
Asynchronous: 723.2kbps/57.6kbps
Synchronous: 433.9kbps/433.9kbps
4dBm(Class 2)
1600hops/sec,1MHz channel space
-84 to -15dBm
1.5MHZ center frequency
16MHz
Bluetooth Specification v1.1
Electrical
Main power input
Power consumption
Backup Power
Operation time
5±5%VDC
0.4W @ 3.3VDC (Full Power)
1.5±10%VDC input
8 hours (1000mAh Li-Ion battery)
20
GPS Firmware
Protocol
Baud Rate
Update Rate
Datum
NMEA/SiRF Binary
19200 bps
1Hz
WGS84
Environmental
Temperature
Operating Temperature 10°C to +55°C
Storage Temperature
20°C to +65°C
Relative Humidity
5% to 95%, non-condensing
LED Indicator
LED 1
Color
Blue
Flashing Blue
Red
BT Active
Yes
No
Low Power
Yes
GPS Fix Status
No
Yes
Battery Charging
Yes
LED 2
Color
Green
Flashing Green
Orange
21
6. Get Connected; Installation Guide
6.1 Laptop PC Installations
Run "My Bluetooth Places" and Double
Click the "Find Bluetooth Devices " icon
Double Click "HI-406BT"
22
Double Click "GPS OUTPUT on HI-406BT"
23
Key in pin code: “0000”
Connected
24
6.2 PDA Installations
Double Click the Bluetooth icon
25
Double click “HI-406BT”
26
Key in pin code: “0000”
Found the host device
27
For Connected with device
Select the correct com port
28
Start GPS, NMEA message inflow
29
More satellites info
Notice : The changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance
requirements, no change to the antenna or the device is permitted. Any
change to the antenna or the device could result in the device exceeding
the RF exposure requirements and void user’s authority to operate the
device.
The antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
30
FCC INFORMATION
The Federal Communication Commission Radio Frequency
Interference
Statement includes the following paragraph:
The equipment has been tested and found to comply with the limits for
a Class B Digital Device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction, may cause harmful
interference to radio communication. However, there is no grantee
that interference will not occur in a particular installation. If this
equipment dose cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on , the user is encouraged to try to correct the interference by one or
more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that
to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
The user should not modify or change this equipment without written
approval form HAICOM ELECTRONICS CORP. Modification could
void authority to use this equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2005:12:09 18:18:30Z
Modify Date                     : 2005:12:13 11:27:30+08:00
Page Count                      : 32
Creation Date                   : 2005:12:09 18:18:30Z
Mod Date                        : 2005:12:13 11:27:30+08:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : HZhao
Metadata Date                   : 2005:12:13 11:27:30+08:00
Creator                         : HZhao
Title                           : Exhibit-E-User_Manual_Part 1.pd.PDF
Has XFA                         : No

EXIF Metadata provided by EXIF.tools