HANWAY TECHNOLOGY V50L VENTILATION FAN User Manual

Download:
Mirror Download [FCC.gov]
Document ID	911297
Application ID	ZboDrqRyNvNyXEjAoPt4PQ==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	105.91kB (1323813 bits)
Date Submitted	2008-03-07 00:00:00
Date Available	2008-03-07 00:00:00
Creation Date	2008-02-29 10:48:49
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2008-02-29 10:49:59
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2
Document Author:	鑴﹀瀯鑴犻搯鑴剻绂勬悅

Honeywell
Ventilation Fan/Light/Nightlight
Model V50L/V70L/V80L/V90L
/V100L/V110L Model
Decorative Ventilation Fan/Light/Nightlight
Model DV50L/DV70L/DV80L
/DV90L/DV100L/DV110L
Installation instructions
Before operating this unit, please read and save these instructions carefully.
The Honeywell Trademark is used under license from Honeywell Intellectual Properties Inc. by Lonon
Industry Company, Ltd.
Honeywell International Inc. Makes no representations or warranties with respect to this product.
Table of Contents
ACCESSORIES................................................................................................2
DESCRIPTION................... . ............................................................................3
DIMENSION............................................... .....................................................3
SPECIFICATIONS.............................................................................................4
GENERAL SAFETY INFORMATION....................................................................4
INSTALLATION................................................................................................6
CLEANING & MAINTENANCE...........................................................................10
SERVICE PARTS..............................................................................................11
WARRANTY....................................................................................................13
Page1
AACCESSORIES(V50L/V70L/V80L/90L/V100L/V110L)
Part name
Picture
Grille
Screw A
M4X10
Screw B
M4X30
Quantity
Quantity
Part name
Light unit
26W
Fluorescent
Lamp
4W
Incandescent
Lamp
Picture
ACCESSORIES(DV50L/DV70L/DV80L/DV90L/DV100L/DV110L)
Part name
Picture
Quantity
Part name
Picture
Quantity
Light unit
26W
Fluorescent
Lamp
Decorative
cap
4W
Incandescent
Lamp
Bolt
Screw A
M4X10
Nut
Screw B
M4X12
Screw C
M4X30
Grille pan
Glass panel
unit
Page2
DESCRIPTION
Honeywell Ventilation Fans were designed with your comfort in mind. With many different
features, Honeywell fans fit your needs whether your bathroom is big or small, needs a light,
no light or even a nightlight, Honeywell fans have the features you need.
Honeywell Ventilation Fans are some of the quietest fans ever tested. Steamy mirrors,
damp walls and foggy windows can be annoying during daily life but what's more, this
excess moisture can lead to the development of problems like mold and mildew, ruined
nsulation and wood rot. Honeywell fans can help provide a ventilation solution to any room
n your house. What's more, Honeywell fans can help clear the air quickly and help remove
irritants before they cause problems in your home.
Honeywell ceiling mounted ventilation fans use high-capacity sirocco fan driven by
capacitor motor. The sirocco fan reduce the noise level.
The motor is designed to have an extended service life with reduced energy consumption.
Honeywell ventilation fans also incorporate a thermal cut off for safety. The grille unit can
be quickly detached from the main unit for cleaning. A damper for preventing air backdraft
is incorporated into every fan.
The light unit is an energy efficient lighting device which uses one 26W fluorescent lamp.
DIMENSION(V50L/V70L/V80L/V90L/V100L/V110L)
AxA
2 7/8
Model No.
V50L
V70L
V80L
V90L
10 5/8
8 1/4
8 1/4
1 3/16
5/16
2 1/2
V100L
V110L
11 3/8
9 1/2
9 1/2
6 3/4
1 5/8
1/2
2 3/8
DIMENSION(DV50L/DV70L/DV80L/DV90L/DV100L/DV110L)
AxA
Page3
2 7/8
Model No.
DV50L
DV70L
DV80L
DV90L
12 3/16
8 1/4
8 1/4
1 3/16
5/16
2 9/32
DV100L
DV110L
13
9 1/2
9 1/2
6 3/4
1 5/8
1/2
2 3/8
ASPECIFICATIONS(V50L/V70L/V80L/V90L/V100L/V110L)
Air
Duct
Weight
Movement Noise
Diameter
Light Unit
(lb.)
0.1" WG (sone)
(inch)
Night
Light
Light
(CFM)
Power consumption*(W)
Model
No.
Power
Supply
Fan
Unit
17.5
20.0
26.5
V90L 120V/60Hz 47.0
V100L 120V/60Hz 37.0
V110L 120V/60Hz 40.0
V50L
V70L
V80L
120V/60Hz
120V/60Hz
120V/60Hz
26.0
26.0
26.0
4.0
4.0
4.0
50
70
80
0.8
2.0
3.0
26.0
26.0
4.0
4.0
90
100
3.5
3.0
26.0
4.0
110
3.5
*At 0.0" Static pressure.(Pa)
Specifications are based on HVI standard.
ASPECIFICATIONS(DV50L/DV70L/DV80L/DV90L/DV100L/DV110L)
Fan
Unit
Air
Duct
Weight
Movement Noise
Light Unit
Diameter
(sone)
(lb.)
0.1" WG
(inch)
Light Night Light
(CFM)
120V/60Hz
120V/60Hz
120V/60Hz
18.5
22.0
26.5
26.0
26.0
26.0
4.0
4.0
4.0
50
70
80
0.8
2.0
3.5
DV90L 120V/60Hz
DV100L 120V/60Hz
48.5
37.0
26.0
26.0
4.0
4.0
90
100
3.0
3.0
DV110L 120V/60Hz
40.5
26.0
4.0
110
3.5
Power consumption*(W)
Model
No.
Power
Supply
DV50L
DV70L
DV80L
*At 0.0" Static pressure.(Pa)
Specifications are based on HVI standard.
GENERAL SAFETY INFORMATION
1.Do not install this ventilating fan where air temperature may exceed 104 (40 ).
2.Make sure that the electric service supply voltage is 120V, 60Hz.
3.Follow all local electrical and safety codes, as well as the National Electrical Code (NEC)
and the Occupation Safety and Health Act (OSHA).
4.Always disconnect the power source before working on or near the fan, motor or junction
box or light fixture.
5.Protect the power cord from sharp edges, oil, grease, hot surfaces, chemicals or other
objects.
Page4
GENERAL SAFETY INFORMATION
6.Do not kink the power cord.
7.This unit is approved for use over a bathtub or shower when installed in a GFCI protected
branch circuit.
8.This unit must be grounded.
9.This unit is U.L. Listed. Type I.C. Inherently protected.
10.These models are UL listed for tub and shower enclosures.
11.Provide suction parts with proper ventilation.
12.Do not install the unit where ducts are configured as shown in Fig.1.
Fig.1
WARNING:
TO REDUCE THE RISK OF FIRE ,ELECTRIC SHOCK,OR INJURY TO PERSONS, OBSERVE
THE FOLLOWING:
1. Use this unit only in the manner intended by the manufacturer. If you have questions,
please contact the manufacturer at the address or telephone number listed in the
warranty.
2.Before servicing or cleaning unit, switch the power off at service panel and lock the
service disconnecting means to prevent power from being switched on accidentally.
When the service disconnecting means cannot be locked, securely fasten a prominent
warning device, such as a tag, to the service panel.
3.Installation work and electrical wiring must be done by a qualified person(s) in accordance
with allapplicable codes and standards, including fire-rated construction codes and
standards.
4.Sufficient air is needed for proper combustion and exhausting of gases through the flue
(chimney) of fuel burning equipment to prevent backdrafting. Follow the heating
equipment manufacturer's guideline and safety standards, such as those published by
the National Fire Protection Association (NFPA) and the American Society for Heating,
Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.
5.When cutting or drilling into wall or ceiling, make sure not to damage electrical wiring and
other hiddenutilities.
6.Ducted fans must always be vented to the outdoors.
7.NEVER place a switch where it can be reached from a tub or shower.
8 .Solid state controls may cause harmonic distortion that can cause motor humming noise.
9.To reduce the risk of fire or electric shock, Do not use this fan with any solid-state speed
control device.
10.Not to be in a ceiling thermally insulated to a value greater than R40.
11. Fluorescent models only: Do not use a dimmer switch to control the light of this unit.
12. Motor and grille assembly must be installed with housing assembly that are marked (on
their cartons) to indicate the suitability with this model. Other housing assembly cannot
be substituted.
13. To reduce the risk of fire use only these 26 watt fluorescent lamps and 4watt maximum
type C incandescent lamp nightlight.
GENERAL ELECTRIC: F26DBXT4/SPX27/4P
PANASONIC: FDS26E27/4
LONON: YDW2U26C/120, YDW2U26D/120
Page5
GENERAL SAFETY INFORMATION
CAUTION:
1.For general ventilating use only. Do not use to exhaust hazardous or explosive
materialsand vapors.
2.This product is designed for ceiling installation only. This product is designed for
installation in ceilings up to a 12/12 pitch. Ductwork must point up. DO NOT MOUNT THIS
PRODUCT ON A WALL.
3.The light fixture assembly must be mounted to the fan housing assembly included with
this product. Do not mount the light fixture assembly to a wiring outlet box.
4.To avoid motor bearing damage and noisy and /or unbalanced impellers, keep drywall
spray, construction dust, etc. off power unit.
5.Please read specification label on product for further information and requirements.
6. Not for use SAFETY
in cooking area.
(Fig. 2)
GENERAL
INFORMATION
(Cooking area)
Do not install above or
Inside this area
Cooking
Equipment
45
45
Floor
Fig.2
AINSTALLATION(joist mounting)(V50L/V70L/V80L/V90L/V100L/V110L)
Power cable
Suspension
bracket
4 Round duct
Suspension
bracket
Ceiling joist
Ceiling joist
Power cable
Housing
Housing
Ceiling material
Grille
Ceiling material
Housing mounted directly to joist
2x4(or larger)
Discharge parallel to joist
I joist
Grille
Additional framing
Housing mounted to additional framing
2x4(or larger)
Discharge 90 to joist
4 Round duct
Suspension
I joist bracket
Power cable
Suspension
Power cable bracket
Housing
Housing
Ceiling material
Grille
Ceiling material
Housing mounted directly to I joist
2x4(or larger)
Discharge parallel to joist
Housing mounted to I joist
Require additional framing
Discharge 90 to joist
*Additional fr aming must be a 2x6(minimum height), at least 9-inches long.
Page6
Grille Additional framing
INSTALLATION(joist mounting)(DV50L/DV70L/DV80L/DV90L/DV100L/DV110L)
4 Round duct
Suspension
bracket
Power cable
Suspension
bracket
Power cable
Ceiling joist
Ceiling joist
Housing
Housing
Ceiling material
Ceiling material
Grille
Housing mounted directly to joist
2x4(or larger)
Discharge parallel to joist
I joist
Power cable
Grille
Additional framing
Housing mounted to additional framing
2x4(or larger)
Discharge 90 to joist
4 Round duct
Suspension
I joist bracket
Power cable
Suspension
bracket
Housing
Housing
Ceiling material
Grille
Ceiling material
Housing mounted directly to I joist
2x4(or larger)
Discharge parallel to joist
Grille Additional framing
Housing mounted to I joist
Require additional framing
Discharge 90 to joist
*Additional fr aming must be a 2x6(minimum height), at least 9-inches long.
INSTALLATION(joist mounting)
STEP.1:PLAN THE INSTALLATIONS
The unit operates most quietly and efficientlywhen located
where the shortest possible duct run and minimum number of
elbows are needed.(Fig.3)
Plan to supply the unit with proper line voltage and appropriate
power cable.
STEP.2:INSTALL THE HOUSING
NOTE
Fig.3
THE FOLLOWING INSTALLATION ILLUSTRATIONS SHOW 2X6 JOISTS. IF YOU HAVE A
TRUSS OR "I"- JOIST INSTALLATION, MOUNT THE VENTILATOR TO THE ADDITIONAL
FRAMING IN THE SAME MANNER.
New Construction (attaching to joist)
1. Choose the location for your fan in the ceiling. For best possible performance, use the
shortest possible duct run and a minimum number of elbows.
2. Position mounting brackets against joist so that bottom edge of housing will be flush
with finished ceiling.
Additional positioning feature for 1/2", 3/4", 1", &1-1/4" thick ceiling material:
Holes in corners of housing are labeled with various ceiling material
thicknesses. Positionhousing so bottom edge of joist is visible through
a matched set of holes. The housing is now in the proper position for
that ceiling material thickness.(Fig.4)
Fig.4
Page7
3. Set housing aside and drive nails partially into joist at the top of both keyhole marks.(Fig.5)
4. Hang housing from nails and pound nails tight. To ensure a noise-free mount, pound
another nail through the top hole of mounting bracket A. (Fig.6)
Fig.5
Fig.6
Existing Construction (accessible from above)
1. Choose the location for your fan/light in the ceiling. For best possible performance, use
the shortest possible duct run and a minimum number of elbows.
2. In attic, position mounting brackets against joist. Trace outline of housing on ceiling
material.(Fig.7)
3. Set housing aside and cut ceiling opening slightly larger than marked.(Fig.8)
4. Place housing in opening so that its bottom edge is flush with finished ceiling. Nail it to
joist through keyholes on both sides. To ensure a noise-free installation, drive another
nail through the top hole of each mounting bracket.(Fig.9)
5. Additional mounting holes are provided for installations where access from above is
inconvenient or not possible. Nail or screw housing directly to joists or framing.(Fig.10)
Additional
mounting holes
Fig.7
Fig.8
Fig.9
Fig.10
Page6
INSTALLATION(joist mounting)
STEP.3:INSTALL THE DUCTWORK
1. Attach damper/duct connector
Snap the damper/duct connector onto housing. Make sure that tabs on the connector lock
into slots in housing. Top of damper/duct connector must be flush with top of housing.(Fig.11)
2. Install 4 inch round ductwork
Connect 4" round duct to damper/duct connector and extend duct to outside through a roof
or wall cap. Check damper to make sure that it opens freely. Tape all duct connections to make
them secure and airtight.(Fig.12)
Fig.11
STEP.4:CONNECT WIRING
Fig.12
Run 120VAC house wiring to installation location, Use proper UL Approved connector to
secure house wiring to wiring plate. Refer to wiring diagram below. Using wire nuts connect
house power wires to ventilating fan wires: black to black; white to white; green to green.
(Fig.13)
Page8
Wiring diagram
Wiring boxing
Terminal
White
White
Lamp
Ballast
Black
Fan unit
AC120V 60HZ
Terminal
Blue
Motor
Black
Power supply
Condenser
White
White
White
Black
Black
Black
Power supply
AC120V 60HZ
Terminal
White
Black
Night Lamp
Power supply
AC120V 60HZ
Green
Earth ground
Earth ground
STEP.5:MOUNTING MOTOR UNIT AND ATTACH THE GRILLE
1.Install ceiling material. Cut out around housing.
2.Mounting the motor unit into the housing, and fastness with one M4x16 screw.(Fig.14)
3. Insert the plug connector into the receptacle respectively, and attach the lighting unit to
the fan unit with 2 screws (M4X10) . (Fig.15)
4. Insert the fluorescent lamp and screw the night lamp into the lighting unit.
5. Squeeze grill springs and insert them into slot on each side of scroll.
Push grill against ceiling. (Fig.16)
Housing
Spring
Lighting
unit
Motor unit
Screw
Grille
Screw
Fig.14
Fig.15
Fig.16
INSTALLATION(joist mounting)
STEP.5:MOUNTING MOTOR UNIT AND ATTACH THE GRILLE
1.Install ceiling material. Cut out around housing.
2.Mounting the motor unit into the housing, and fastness with one M4x16 screw.(Fig.17)
3.Screw the bolt into motor plate.(Fig.18)
4. Insert the plug connector into the receptacle respectively, and attach the light unit to the
fan unit with 2 screws (M4X10).(Fig.19)
5. Insert the fluorescent lamps and screw the night lamp into the light unit.
6. Locate the grille unit over the fan housing, Screw the nut into the bolt.(Fig.20)
7. Insert the bolt of Glass panel to four holes of the motherboard, push the panel in the
indicated direction, wedge the panel to the motherboard. (Fig.21)
Page9
Housing
Connector
Motor
unit
Bolt
Grille
pan
Lighting
unit
Screw
Screw
Fig.17
Fig.18
Nut
Fig.19
Fig.20
Glass panel
Fig.21
CLEANING & MAINTENANCE
WARNING:
1.Disconnect power source before working on unit.
Routine maintenance must be done every year.
2.The lamp's glass is fragile. Please handle with care. To remove lamp, grasp at base and
move back and force to loosen.
3.Do not pull hard on the lamp or you may break the glass.
4.4W night lamp has threaded base. Remove by turning counterclockwise. The glass panel
is fragile. Remove it with care.
CAUTION:
1. Never use petrol, benzene, thinner or any other such chemicals for cleaning the ventilating
fan.
2. Do not allow water to enter motor.
3. Metal and electrical parts should never be immersed in water.
4. Do not immerse resin parts in water over 140 (60 ).
CLEANING
Remove decorative caps and machine screw (M4X12) from grille pan unit, and remove glass
panel carefully. Remove the grille pan unit from fan body. Glass shade can be wiped clean with
a mild detergent solution or glass cleaner and dried with a soft cloth. Grille pan unit may be
gently vacuumed and wiped clean with a soft cloth. And wipe grille pan unit dry with new cloth.
Never use abrasive cloth, steel wool pads or scouring powders on glass shade or grille pan unit.
Remove bulbs if necessary. Remove dust and dirt on fan body using a vacuum cleaner. Using
a cloth dampened with mild dish soap, remove any dirt from fan body. Wipe dry with new cloth.
Replace bulbs, grille pan unit, glass pan and decorative caps.
MAINTENANCE
The motor is permanently lubricated and never needs oiling. If the motor bearings are
making excessive or unusual noises, replace the motor with the exact service motor. You
must replace the impeller at the same time.
REPLACEMENT OF LAMP
Remove decorative caps and machine screw (M4X12) from grille pan unit, and remove
glass panel carefully. Remove grille pan unit from fan body. Disconnect the connectors of
light unit from fan unit. Change the 26W fluorescent bulb or the 4W incandescent lamp,
connect the connectors and replace grille pan unit, glass panel and decorative caps.
SERVICE PARTS(V50L/V70L/V80L/V90L/V100L/V110L)
18
19
20
21
22
23
24
10
11
12
13
14
16
17
15
Page10
No.
Part name
No.
Part name
Housing
Outlet cover
Mounting Bracket A
13
14
15
Casing
Motor support
Mounting Bracket B
16
Motor
Adaptor
17
Damper
18
Screw
Reflecting cover unit
Female pin connector
19
Wiring cover
Blower Wheel setting nut
20
21
Compact Fluorescent Lamp
setting bracket
Compact Fluorescent Lamp
Lamp holder
10
Blower Wheel
22
Spring hook
11
12
Condenser box cover
Condenser
23
24
Grille spring
Ballast
Grille
These instructions may be printed in English ("the English version") and one or more other
languages ("other versions"), in which case the English version shall prevail if there is any
inconsistency between the English version and any one or more of the other versions.
SERVICEPARTS(DV50L/DV70L/DV80L/DV90L/DV100L/DV110L)
22
23
11
12
24
13
14
15
17
18
26
20
16
25
10
21
19
Page11
No.
Part name
No.
Part name
Housing
14
Motor support
Outlet cover
15
Ballast
Mounting Bracket A
16
Motor
Mounting Bracket B
17
Screw
Adaptor
18
Reflecting cover unit
Damper
19
Compact Fluorescent Lamp
setting bracket
Female pin connector
20
Compact Fluorescent Lamp
Wiring cover
21
Lamp holder
Blower Wheel setting nut
22
Bolt
10
Blower Wheel
23
Grille pan
11
Condenser box cover
24
Nut
12
Condenser
25
Glass panel unit
13
Casing
26
Decorative cap
These instructions may be printed in English ("the English version") and one or more other
languages ("other versions"), in which case the English version shall prevail if there is any
inconsistency between the English version and any one or more of the other versions.
Page12
WARRANTY
LONON USA, LLC
LIMITED WARRANTY
Product Name:
Date of purchase:
Date of installation:
Model Number:
Dealer:
Builder/ Installer:
Warranty Period (from date of original purchase) ("Warranty Period"): Five (5) years for the
motor; One (1) year for other parts.
LIMITED WARRANTY. Lonon USA, LLC ("LONON") gives this limited warranty ("this Warranty")
to the original purchaser of the Product ("Buyer"), subject to the following terms: LONON warrants
that the Product will be free from original defects in materials and workmanship for the Warranty
Period, PROVIDED (i) that the Product has been properly stored,installed, serviced, maintained
and operated; (ii) that the Product has not been ltered or repaired in any way which, in LONON's
reasonable judgment, will affect its performance or eliability; and (iii) that the Product has not
been improperly installed or subjected to misuse, negligence, or accident, or incorrectly used
in combination with other articles. Save where provided otherwise in this Warranty,Buyer assumes
all risks and liability for results of use of the Product. Where applicable, warranties on purchased
parts are limited to the terms of the warranties extended by LONON's supplier(s). Without
prejudice to the limitations and exclusions below, THIS WARRANTY SHALL BE VALID ONLY
IF THE PRODUCT IS PURCHASED AND INSTALLED IN THE UNITED STATES.
WARRANTY SERVICE. All claims under this Warranty shall be made in writing and delivered
to LONON at the address set out below within 15 days after discovery of the defect and prior
to the expiration of the Warranty Period. Buyer shall be barred from any remedy if Buyer fails
to make such claim within such period. Within 30 days after receipt of a timely claim, LONON
shall have the option either to inspect the Product while in Buyer's possession or to request
Buyer to return the Product to LONON at Buyer's expense for inspection by LONON. Subject
to the terms of this Warranty, LONON will, during the Warranty Period, at its option replace or
repair, free of charge, the Product or part thereof which LONON determines is defective under
normal use and maintenance.
This Warranty does not cover and LONON is not responsible for : (i) normal maintenance
and service; (ii) any Product which has been subjected to misuse, improper maintenance or
modification, neglect, electrical current fluctuations, negligence, accident, improper or faulty
operation or installation or installation contrary to the installation instructions, use of parts or
supplies other than LONON's that cause damage to the Product, defacement, alteration, or
removal of a product serial number; (iii) the cost of removal of the defective Product or part,
damages due to removal, or any expenses incurred in shipping the defective Product or part
to or from LONON's service centre, or the installation of the repaired or replacement product
or part; (iv) any glass component, light bulb, fluorescent lamp, starter, tube, filter, duct, roof
cap, wall cap or other ducting accessories even where the Product is equipped with any of the
same.
Subject to the above warranty, to the maximum extent permitted by applicable law:
(i) LONON and its suppliers provide the Product as is and hereby disclaim all other warranties
and conditions whether express implied or statutory, including without limitation implied
warranties or conditions of merchantability and of fitness for a particular purpose, and any
responsibility for any loss of revenues or profits, inconvenience, expense for substitute
equipment or service, storage charges, or loss or corruption of data;
(ii) implied warranties, when applicable, shall commence upon the same date as the express
warranty provided above,and shall, except for warranties of title, extend only for the duration of
the express warranty above;
(iii) LONON assumes no liability on account of any recommendations, opinions or advise as
to the choice, installation or use of the Product, and any such recommendations, opinions or
advice given are accepted at the original purchaser's own risk and shall not constitute any
warranty or guarantee concerning any matter;
Page13
WARRANTY
(iv) in no event shall LONON and its suppliers be liable for any special, incidental, punitive,
indirect, or consequential damages whatsoever arising out of or in any way related to the use
of or inability to use the Product for whatever reason and based on whatever cause of action;
(v) the entire liability of LONON and its suppliers in relation to the manufacture and supply of
the Product is limited to the amount actually paid by the original purchaser for the Product.
Damages are limited to the purchase price of the Product.
This Warranty gives the Buyer specific legal rights. Some states do not allow limitation on
how long an implied warranty lasts, or exclusion of or limitation on incidental or consequential
damages. The extent to which the above limitations and exclusions are valid may vary from
state to state.
No agent, dealer, employee or other person is authorized to give any other warranties or
assume any other liability on LONON's behalf in connection with the Product except in writing
signed by an authorized officer of LONON.
Notwithstanding any past practice or dealings or any custom of the trade, the supply of the
Product does not include the provision of any technical advice or system design, which may be
provided at LONON's sole option and subject to additional charges.
This Warranty may be printed in English ("the English version") and one or more other languages ("other
versions"), in which case the English version shall prevail if there is any inconsistency between the English
version and any one or more of the other versions.
FOR ASSISTANCE: PLEASE CONTACT
Lonon USA, LLC
Customer Service Centre:
4320 Winfield Road, Suite 200 Warrenville, IL 60555
Opening hours: Mon. - Fri. (except public holidays): 8:00 am to 3:30 pm
Toll free service hotline: 1-888-566-6687
IMPORTANT: The original invoice for the purchase of the Product together with this
warranty card must be presented in order to qualify for service under this Warranty.
Page11
Version:A
Revision Data: 12/14/2005
CBT-126L-120S
APPLICATION and PERFORMANCE SPECIFICATION
Description: Electronic ballast for compact fluorescent Lamp (1) Quad 4pin 26W or (1) TwinT5 4pin 24W or (1)T5 linear 24W
• Line Voltage : 120Vac, 60Hz
• Rapid Start
• Lamp Connection: Single Lamp WS-1
Model
Line
Volts
Lamp
Type**
Freq-Hz
No.of
lamps
Input
Nominal
Power
Crest
Watts*
Line Amps
Factor
Factor
27
0.39
25
0.37
0.56
<1.7
24
0.32
26W/8T4/Q/G24q-3
(Quad 4pin/PL-C 26W)
CBT-126L-120S
120
60
24-27W/13T5/T/2G11/PH-RS
(Twin T5 4pin/PL-L 24W)
T5 linear 24W
Case ULC #
#90-5B
*ANSI measured wattage,25ć ambient,benchtop,lamps base up ; Enclosed fixture, wattage may change depending on fixture type.
**Lamp Type: Quad 4pin T4
Application and Performance Specification Information Subject to Change without Notification.
Performance:
• Meets ANSI Standard C82.11-1993
• Meets ANSI Standard C62.41-1991
• Meets UL 935
• Meets FCC Part 18 (Class B) for EMI
• Operating Frequency Range: 45-55 kHz
Safety:
• No PCB's
• UL listed (Class P)
• UL # 221323
• Abnormal Protection Circuit
• End of lamp life protection Circuit
• Auto-Reset Shutdown Circuit
- lamp(s) should be replaced at end of lamp life
- Lamp relights upon insertion in socket
Application:
•
•
•
•
Minimum Starting Temperature:
Maximum Ambient Temperature:
Maximum Case Temperature (@ tc):
Sound Rated:
Physical Parameters
5° F (-15° C)
122° F(50° C)
158° F(70° C)
Case:
Overall Length(L):
Width(W):
Mounting(M):
Height(H):
Weight:
Qty/Carton:
Color:
Can Material:
Red
White
Black
BALLAST
Blue
Install in accordance with
the National Electrical Code
Wire length:
(±25.4mm)
CM-31(#90-5B)
3.86"(99mm)
2"(52mm)
3.5"(90mm)
1.00"(25.4mm)
0.55bs(0.25kg)
30
Black/White
Metal
Black
320mm
White
300mm
Blue
240mm*2
Red
240mm*2
Ballast must be grounded.
FCC NOTE:
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modification
could void the user's authority to operate the equipment.
This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other
critical navigation or communication equipment operating between 0.450-30MHz.
Warranty:
Universal Lighting China warrants to the purchaser that each electronic ballast will be free from defects in material or
workmanship for a period of 3 years from date of manufacture when properly installed and under normal conditions of use.
Call 8621-64808118*218,128 for technical assistance.
ƻƻƻƻƿƿ
Manufactured in China

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2008:02:29 10:48:49+08:00
Modify Date                     : 2008:02:29 10:49:59+08:00
Metadata Date                   : 2008:02:29 10:49:59+08:00
Creator Tool                    : PScript5.dll Version 5.2
Document ID                     : uuid:1F13DFD770E6DC11B82B89118832AEBB
Instance ID                     : uuid:cde72331-ec92-4d1c-9772-584a322e1240
Derived From Instance ID        : uuid:0636a09a-5206-42ec-b52a-41c480665b83
Derived From Document ID        : uuid:13E922585FC9DC11A2FD9F55E337BAFC
Format                          : application/pdf
Creator                         : 鑴﹀瀯鑴犻搯鑴剻绂勬悅
Title                           : V鑴х鑴曡劏楹撻叾纰岃劃鑴ｇ鑴欐鑴㈣寘(鑴瀯鑴﹁剾).cdr
Page Count                      : 15
Author                          : 鑴﹀瀯鑴犻搯鑴剻绂勬悅

EXIF Metadata provided by EXIF.tools