HARRIS TR-414-A2 GSM Portable Phone - computer interface User Manual change

HARRIS CORPORATION GSM Portable Phone - computer interface change

Exhibit 8 addendum

Download: HARRIS TR-414-A2 GSM Portable Phone - computer interface User Manual change
Mirror Download [FCC.gov]HARRIS TR-414-A2 GSM Portable Phone - computer interface User Manual change
Document ID120019
Application IDMY5j10tvdSXSLKn9iOmOpg==
Document DescriptionExhibit 8 addendum
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize1.35kB (16935 bits)
Date Submitted2000-10-05 00:00:00
Date Available2000-11-30 00:00:00
Creation Date0000-00-00 00:00:00
Producing SoftwareAcrobat PDFWriter 3.02 for Windows
Document Lastmod0000-00-00 00:00:00
Document Titlechange.PDF
Document CreatorMicrosoft Word
Document Author: Unknown

Text added:
To comply with FCC RF exposure requirements for mobile transmitting devices, the external antenna
used for this device must be vehicle-mounted to provide a minimum separation distance of 20cm from all
persons, with the antenna gain not exceeding 3dBi.
INSTALLATION PROCEDURE
Note! Always have your handsfree unit, antenna and cables installed by qualified personnel.
The installation chart on page 90 shows connections and recommended locations for all parts of
the handsfree equipment, as well additional accessories.
We recommend that you use an external antenna for best reception. For advice on which antenna
to use and for professional installation, please refer to your local car dealer. Some car
manufacturers require that you use an external antenna for your mobile telephone, please consult
your car manual.
The holder should be placed so that you can see the display and reach the keys from your normal
driving position. However, it should not interfere with the operation of the vehicle, block the
driver’s view, or distract the driver.
General
1. Mount the electronics unit behind the instrument panel or under the passenger seat. Use the
screws delivered with the equipment to mount the electronics unit by the fastening device.
2. The loudspeaker should be mounted on a fixed part of the car interior, e.g. on the wall in the
foot space at the passenger side. Connect the loudspeaker to terminal B on the electronics
unit.
3. The microphone should be mounted on a fixed part of the car interior. It should be mounted
as close to the speaker’s mouth as possible and be directed towards him. The distance
between the loudspeaker and the microphone should be at least 50cm. Connect the
microphone to terminal D on the electronics unit.
Note! Do not mount the microphone on the sun visor. Vibrations will cause echoing. You will
get the best conditions if you mount the microphone close to the rearview mirror, see installation
chart on page 90.
4. Your handsfree equipment also includes a music mate cable. The cable should be connected
to terminal E on the electronics unit. For instructions on how to connect the cable to your car
stereo, see your car stereo manual.
To comply with FCC RF exposure requirements for mobile transmitting devices, the
external antenna used for this device must be vehicle-mounted to provide a minimum
separation distance of 20cm from all persons, with the antenna gain not exceeding 3dBi.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 2
Creator                         : Microsoft Word
Create Date                     : Tuesday, September 26, 2000 2:06:55 PM
Title                           : change.PDF
Author                          : Unknown
Producer                        : Acrobat PDFWriter 3.02 for Windows
Subject                         : 
EXIF Metadata provided by EXIF.tools
FCC ID Filing: AXATR-414-A2

Navigation menu