HCY Electrics and Technology HCY-57B Air Mouse User Manual 15 HCY 57B UserMan

Download:
Mirror Download [FCC.gov]
Document ID	3660400
Application ID	NFIUxN1ZaIsPcx/PlifTcA==
Document Description	15_HCY-57B UserMan
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	53.56kB (669538 bits)
Date Submitted	2017-12-01 00:00:00
Date Available	2017-12-01 00:00:00
Creation Date	2017-11-24 16:41:56
Producing Software	Corel PDF Engine Version 15.1.0.588
Document Lastmod	2017-12-01 09:40:39
Document Title	HCY57B-A999-001-V10说明书(认证版).cdr
Document Creator	CorelDRAW X5
Document Author:	Administrator

Air Mouse Use Manual
FCC ID:2AOBUHCY-57B
Picture Image
Led Indicator
Charging Indicator
Power ON/OFF
Air mouse
Air Mouse function:
Air mouse and receiver has been paired , so the receiver
can be inserted after the automatic connection of the air
mouse, in the course of misuse or other causes of air mouse
and receiver can not connect the normal communication
can be connected through the following methods:Matching
operation is as follows:
Click cursor lock button to open the function of the air
mouse, the blue indicator light on. In the air mouse state,
with the remote control interface, the mouse will follow
the same direction, the left mouse button to confirm the
correct function.
After inserting the receiver, close the air
mouse near the receiver (within 10CM),
Start
then press and hold the [Volume +] button
pairing and the [Volume -] button for about 3
seconds. The blue light flashes three times,
it means into the pairing mode.
Confirm
/direction key
Return
Increases the speed of the air mouse: press and hold the
[OK] key + [volume +] key for about 3 seconds, the work
indicator flashes twice and then releases the CPI on the
original basis increase of 1 file.
Volume+,Volume-
IR learning Function:
When the remote control is not connected to the USB
dongle, the front button is the infrared function (except
the mouse button); when connected with the USB Dongle
2.4G function; [power] key always in infrared function.
a:Press and hold the “ok” button and “power” button at
the same time, the indicator light become slightly light ,
after 3 seconds the indicator light become more bright ;
Fn Led indicator
Esc
Caps
Shift
Ctrl
b:Press the remote control to learn the infrared function
button ,the indicator light flashing;
c :Use the transmitting tube of learning remote control
alignment the transmitting tube of learning which keep
1cm distance proceed to learning operation ,after
succeed learning then indicator light flash 3 times
become normally on.repeat the step of b-c could
learning multiple key successively.
Del
BACK
www.
.com
Click the mouse button again to turn off the mouse
function. The blue light turns off.
CPI adjustment
After the 30 seconds,the blue light flashes
Pairing
three times and goes out,it means exits the
Failure
pairing mode.
The mouse speed slow down: hold down the [OK] key +
[volume -] key for about 3 seconds, the work indicator
flashes twice after the release, CPI on the basis of the
original reduction of 1 file.
Auto sleep and wake up feature
When the remote control for 15 seconds
without any operation, the remote control
into sleep mode, blue light is off.
After the remote control entering
hibernation , press any key to wake up the
remote control to enter the normal
working condition.
Charging line instructions
Fn:switch to the blue character function, the indicator
light on, then press once to switch back to the default
function, the Indicator goes off.
WWW./.COM:quick input WWW. and .COM characters.
Prohibit flip function
In order to prevent the wrong operation of the key, the air
mouse in normal use only allows the function of the button
on the side, the next button function to prohibit the output.
Charger
Project
1. Air Mouse
2. USB Receive
3. USB charging cable
Indicator led status
Separate status
Blue light flashing slowly
with USB receiver
Click Button
Press Button
Connection status
long time
with USB receiver
Open the
air mouse
Enter pairing mode
Pairing
Pairing successed
Power
indication
Charging
Low power
Blue light flashes once
Remote
(DC5V)
4. User Manual
Blue light flashes once
Warning
Blue light normally on
Blue light normally on
Blue light flashing 3
times quickly
Charging :Red light normally on
Full of charging: red light off
Press any buttons,the blue light
flashes 3 seconds quickly.
Specifications
Wireless modulation mode：GFSK
Modulation frequency:2.406GHZ
Working temperature:-20℃~65℃
Battery type: 300mah ,3.7 V lithium battery
Overall power consumption: less than 9mA
Standby power consumption: less than 25uA
Key number: 57keys
Remote control distance: ＞10 meters
Charging port:micro USB
Size: 158*55*16.5MM
Weight:About 86.5g±5g
Support system:Windows\Android\Mac OS\Linux
changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV
technician for help.
THANKS FOR READING
Notice:
This product uses built-in lithium battery, charging
input voltage of 5V.
If the remote control is not used for a long time or when
the battery is low, please use it when it is fully charged.
Use the specified USB cable to charge the remote control,
overcharge the battery will shorten the battery life.
Avoid use in hot or cold environments, which will shorten
battery life.
d :Press the( Air mouse )button to exit the learning mode
and save learning date.
Usb Charging port
Package contents
Led Indicator instructions
CPI (mouse pointer movement speed) default second file
(CPI is divided into four files, respectively, 1,2,3,4 file),
the greater the value of the stall the faster the speed
of the mouse.
After a few seconds of pairing, the blue light
Pairing
flashes three times to indicate that the
Success
pairing is successful.
Home
Menu
Pairng Method
RoHS
Made ln China
VER:1.1

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Format                          : application/pdf
Creator                         : Administrator
Title                           : HCY57B-A999-001-V10说明书(认证版).cdr
Create Date                     : 2017:11:24 16:41:56+08:00
Creator Tool                    : CorelDRAW X5
Modify Date                     : 2017:12:01 09:40:39+08:00
Metadata Date                   : 2017:12:01 09:40:39+08:00
Producer                        : Corel PDF Engine Version 15.1.0.588
Document ID                     : uuid:b97e576f-0d6d-43a9-807d-c1d3a61a16c6
Instance ID                     : uuid:c243db4b-d244-4edf-a7d4-180229b8049f
Page Count                      : 1
Author                          : Administrator

EXIF Metadata provided by EXIF.tools