HHC Changzhou CB20HHC011 Control Box User Manual CB20B Control Box Instructions

Download:
Mirror Download [FCC.gov]
Document ID	3903489
Application ID	TySw77WnIz3DNCARt9MtRA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.28kB (203465 bits)
Date Submitted	2018-06-27 00:00:00
Date Available	2018-06-27 00:00:00
Creation Date	2018-05-28 13:39:33
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2018-06-27 09:32:09
Document Title	Microsoft Word - CB20B Control Box Instructions
Document Creator	PScript5.dll Version 5.2.2
Document Author:	baclsh51

CB20B Control Box Instructions
1. Product Overview
Product Name：
Control Box
Product Model No.： CB20B
2. Environment requirement
Operation temperature: +10℃~ +40℃.
Storage temperature: －10℃~65℃.
Operating Humidity：10%~80%RH，non‐condensing.
Storage Humidity：10%~ 85%RH，non‐condensing.
3. Directions for Operation
To use the control box, the switch power supply must be connected as the control box power
supply (input: DC29V 4A). The CH06 remote control must also be paired to be used. Detailed
usage for each port is as follows:
3.1 Before use, the remote control CH06 and CB20B control box must be paired:
CH06
3.2 Then, turn on the control box's Power, and after the beep sound the system will work. Follow
the example below to proper plug parts in.
4. The port is introduced
4.1 “Motor 1 Port”：Connects to the first motor, and lifts/lowers the section.
4.2 “Motor 2 Port”：Connects to the second motor, and lifts/lowers the section.
4.3 “Motor 3 Port”：Connects to the third motor, and lifts/lowers the section.
4.4 “Motor 4 Port”：Connects to the fourth Tilt motor, and lifts/lowers the section.
4.5 “Motor 5 Port”：Connects to Head massage motor, controls strength of head massage and
on/off.
4.6 “Motor 6 Port”： Connects to Foot massage motor, controls strength of foot massage and
on/off.
4.7 “Power Port”：Connects to the power supply box, controls power supply.
4.8 “USB Port”：Connects to the USB adapter box and USB socket connection.
4.9 “LED Port”：Connects with lights.。
4.10 “SYN Port”: Connect another control box, and two control boxes will synchronize.
4.11 “Motion Port”: Connect to the motion sensor.
4.12 “Program Port”: Used for programming.
4.13 “Handwand Port”: Connect to the Handwand.
4.14 “Voice Control Port”: Connect to the Voice Contorl module.
5. Matters needing attention：
5.1 The function will only work normally in proper working power conditions.
5.2 Control box input voltage must be less than 29.2VDC.
5.3 The CH06 remote control is needed for proper control.
5.4 If problems are identified, they must be treated by professional personnel.
6. Additional attention for user：
6.1 This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/ TV technician for help.
6.2 This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
6.3 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment .This equipment should be installed and operated with minimum distance
20cm between the radiator& your body.
6.4 For Intentional and unintentional radiators the manual shall caution the user that changes or
modifications not expressly approved by the party responsible for compliance could void the users
authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : baclsh51
Create Date                     : 2018:05:28 13:39:33+08:00
Modify Date                     : 2018:06:27 09:32:09-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2018:06:27 09:32:09-07:00
Format                          : application/pdf
Title                           : Microsoft Word - CB20B Control Box Instructions
Creator                         : baclsh51
Document ID                     : uuid:d60587ec-6419-4220-9e4d-ec70ea733b39
Instance ID                     : uuid:439269d9-1b84-4dad-89c3-a563c05c3f4e
Page Count                      : 3

EXIF Metadata provided by EXIF.tools