HHC Changzhou CH18HHC003 Control Box User Manual CH18 Hand Control Instructions V1

Download:
Mirror Download [FCC.gov]
Document ID	2728525
Application ID	jgQBIkadZ0ckY879s3ldxA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.2kB (202442 bits)
Date Submitted	2015-08-27 00:00:00
Date Available	2015-08-27 00:00:00
Creation Date	2015-08-25 09:38:25
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2015-08-25 09:38:25
Document Title	Microsoft Word - CH18 Hand Control Instructions-V1
Document Creator	PScript5.dll Version 5.2.2
Document Author:	jack.chen

CH18 Hand Control Instructions
1. Product Overview
Product Name：
Hand Control
Product Model No.： CH18
FCC ID:
2AEQWCH18HHC003
2. Environment requirement
Operation temperature: +10℃~ +40℃.
Storage temperature: －10℃~65℃.
Operating Humidity：10%~80%RH，non‐condensing.
Storage Humidity：10%~ 85%RH，non‐condensing.
3. Directions for Operation
In order to operate, place three 1.5V AAA batteries in the remote control and use in conjunction
with the CB18 control box. In addition, the PSK2920A power supply switch must be connected as
the power supply for the control box. Detailed operation directions below:
Match Code：
Press and hold the button, approx. 15 seconds, until the remote’s front indicator lights
up. Then, connect it to the control box Power plug. After the beep sound, the pairing is complete
and remote can operate.
Indicator
light
1/4
4.
The port is introduced
All motorized functions of the bed are controlled by the remote control.
4.1.BackrestLift.
Press this button to lift up the backrest. Keep the button pressed and release
when the desired tilt is achieved.
Press this button to lower the backrest. Keep the button pressed and release
when the desired tilt is achieved.
4.2.FootrestLift.
Press this button to lift up the footrest. Keep the button pressed and release
when the desired tilt is achieved.
Press this button to lower the footrest. Keep the button pressed and release
when the desired tilt is achieved.
4.3.Bed Tilt.
If the optional bed Tilt is NOT installed on your bed, these buttons are without
operation.
Press this button to lift up the head end of the bed. Keep the button pressed
and release when the desired tilt is achieved.
Press this button to lower the head end of the bed. Keep the button pressed
and release when the desired tilt is achieved.
4.4.Massage Function
Press this button to increase the intensity of the back massage.
2/4
Press this button to reduce the intensity of the back
massage.
Press this button to stop the back massage.
Press this button to increase the intensity of the foot massage.
Press this button to reduce the intensity of the foot
massage.
Press this button to stop the foot massage.
4.5.Backlit illumination of remote control
To illuminate the buttons for better night view when press this button . The light
will turn off automatically after approximately 10 seconds.
Note: The light also turns on when pressing any of the other buttons.
5. Matters needing attention：
5.1 Do not mix old and new batteries or different types of batteries in remote.
5.2 When the battery power is weak, electrolyte leakage may occur, and will damage the
remote. Once the power is low, replace the battery as soon as possible.
5.3 If the remote will not be used for a long period of time, remove the batteries to avoid
electrolyte leakage.
5.4 The battery should not be exposed to direct sunlight, fire, or other excessive heat. To
protect the environment, used batteries should be recycled in a proper manner.
6. Additional attention for user：
6.1 This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/ TV technician for help.
6.2 This device complies with part 15 of the FCC Rules. Operation is subject to the following two
3/4
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
6.3 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF exposure
compliance. To maintain compliance with FCC RF exposure compliance requirements, please
using a minimum separation distance of 5 mm from the device.
This transmitter must not be co‐located or operating in conjunction with any other antenna
or transmitter.
6.4 For Intentional and unintentional radiators the manual shall caution the user that changes
or modifications not expressly approved by the party responsible for compliance could void the
users authority to operate the equipment
4/4

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : jack.chen
Create Date                     : 2015:08:25 09:38:25+08:00
Modify Date                     : 2015:08:25 09:38:25+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : jack.chen
Title                           : Microsoft Word - CH18 Hand Control Instructions-V1
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:2f8d550b-e49e-4c20-9341-84fcba7e721b
Instance ID                     : uuid:b3647e04-6612-4e83-92f3-0146a2697fa4
Page Count                      : 4

EXIF Metadata provided by EXIF.tools