HID Global 630XA 61xxBxx iCLASS Proximity Readers User Manual

HID Global Corporation 61xxBxx iCLASS Proximity Readers Users Manual

Contents

Users Manual

Download: HID Global 630XA 61xxBxx iCLASS Proximity Readers User Manual
Mirror Download [FCC.gov]HID Global 630XA 61xxBxx iCLASS Proximity Readers User Manual
Document ID640422
Application IDvaopWSH6h1TnbH1hJHfz0Q==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize86.82kB (1085262 bits)
Date Submitted2006-03-23 00:00:00
Date Available2006-03-23 00:00:00
Creation Date2006-01-17 13:26:47
Producing SoftwareAdobe PDF Library 7.0
Document Lastmod2006-01-17 13:26:52
Document TitleUsers Manual
Document CreatorAdobe InDesign CS2 (4.0)

R10 • R10A • R30 • R40 • RP40 • RW100 • RW300 • RW400
4 RW100, RW300, RW400 HSI Expansion Modules
HSI Modules
connect to terminal readers
(3122 - RS232, 3123 - RS485, 3124 - USB)
P1-1
P2-1
Recursos
5 OPTIONAL FEATURES
•	HSI modules are available which plug into all terminal readers to provide optional functionality.
3122 - RS232, 3123 - RS485, 3124 - USB.
•	Open Collector Output - controls an external device (16 VDC Max) operating in Host Mode
only. See iCLASS Application Note for details.
•	Configuration Options - Configure LED, Speaker, keypad operation, keypad lighting, and other
features. See How To Order Guide or iCLASS Application Note for details.
•	Hold Input - when asserted, this line either buffers a card or disables a card read until released,
as configured.
FCC warning
This device complies with part 15 of the FCC rules.
Optionale Funktionen
•	HSI modules are available which plug into all terminal readers to provide optional
functionality.
3122 - RS232, 3123 - RS485, 3124 - USB.
•	Offener Kollektorausgang – steuert ein externes Gerät (16 V max.), das
nur im Hostmodus betrieben wird. Nähere Informationen unter iCLASS
Anwendungshinweis.
•	Konfigurationsoptionen – LED, Lautsprecher und anderes konfigurieren. Nähere
Informationen unter Auftragsleitfaden oder iCLASS Anwendungshinweis.
•	Halteeingang – wenn aktiviert, puffert diese Leitung entweder eine Karte oder
deaktiviert eine Kartenlesung bis zur Freigabe, je nach Konfiguration.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference that may cause undesired operation.
• For proper regulatory compliance, the drain wire should be disconnected at the power supply end of the cable.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
• The Reader is intended to be powered from a limited power source output of a previously certified power supply.
Características
opcionales
•H
 SI modules are available which plug into all terminal readers to provide optional functionality.
3122 - RS232, 3123 - RS485, 3124 - USB.
•	Salida a colector abierto – Controla un dispositivo externo (16 VCC Máx.) operando en Modo
Host solamente. Para mayor información, consulte la Nota de Aplicación de iCLASS.
•	Opciones de configuración – Permite configurar el Led, altavoz y otras características. Para
más detalles, consulte la Guía Cómo Hacer su Pedido o la Nota de Aplicación de iCLASS.
•	Entrada de retención – Según sea la configuración, cuando esta línea se activa, se almacena
el valor de la última tarjeta leída o se deshabilita la lectura. Esto sucederá mientras esta línea
permanezca activada.
Caractéristiques
opcionais
• HSI modules are available which plug into all terminal readers to provide optional
functionality.
3122 - RS232, 3123 - RS485, 3124 - USB.
• Tomada aberta de captação – controla um dispositivo externo (máximo de 16
VDC) em
operação exclusivamente no modo host. Para obter maiores detalhes, consulte a
observação de aplicação do iCLASS.
• Opções de configuração – configura o LED, o alto-falante e os outros recursos.
Para obter maiores detalhes, consulte o guia "Como fazer seu pedido" ou a
observação de aplicação do iCLASS.
• Bloqueio de entrada de sinal – quando ativada, esta linha impede a utilização
do cartão lido, ou desativa o cartão lido, até o momento em que for liberado,
de acordo com a configuração.
Funzioni Opzionali
•	HSI modules are available which plug into all terminal readers to provide optional
functionality.
3122 - RS232, 3123 - RS485, 3124 - USB.
•	Uscita collettore aperto - controlla un dispositivo esterno (mass. 16 V c.c.) che funziona solo in modalità host. Per dettagli, vedere la nota applicativa iCLASS.
•	Opzioni di configurazione - per configurare il LED, lo speaker e altre funzioni. Per
dettagli, vedere la guida alle ordinazioni o la nota applicativa iCLASS.
•	Ingresso trattenuta - quando viene attivata, questa linea mette in buffer una
scheda o disabilita una scheda, secondo la configurazione.
optionnelles
• HSI modules are available which plug into all terminal readers to provide optional functionality.
3122 - RS232, 3123 - RS485, 3124 - USB.
• Sortie auxiliaire : peut être pilotée via la liaison série. Cf la note d'application iCLASS N° 28
• Configurations optionnelles : fonctionnement des LED, du Beeper, et autres fonctionnalités. Cf le
guide de commande pour plus de détails
• Entrée Hold : permet, si utilisée, de mémoriser une carte ou de désactiver la lecture de cartes
selon la configuration choisie.
6 PARTS
parts
componentes
pièces
peças
teile
componenti
• 1 - iCLASS Reader
• 1 - Installation Manual
• 2 - 3.5 mm x .6 pitch x 12 mm
Phillips machine screws
• 3 - #6-32 x .375” Phillips
self-tapping machine 		
screws
• 2 - #6 x 1.5” Phillips sheet
metal screws
• 1 - #6 x .375” Spanner
security screw, anti-tamper
Recommended
• Up to 9 wire splices (pigtail)
• Cable, 5-9 conductor 		
(Wieg. or RS232), 22 AWG
shielded (pigtail)
• Linear DC Power supply
• Metal or plastic junction box
• Security Tool (for antitamper screw) HID 04-0001-03
• 1 lector
• 1 manual de instalación
•	2 Tornillos Phillips de 3.5mm
x 12mm, paso 0.6
•	3 Tornillos autoperforantes
N.° 6 para metales Phillips
32 x 0.375"
•	1 Tornillo de seguridad
N.° contra sabotaje 0.375"
Recomendado
•	9 empalmes para cable
•	1 cable, 5-9 conductores
(Wiegand o Rs-232) blindado 22AWG
•	Fuente de alimentación
lineal CC
•	Caja de conexiones
metálica o de plástico
•	Interruptor magnético,
Ademco 945T, Sentrol
1038T, GRI 100T, GRI 110T o
Aleph DC-2531
•	Herramienta de seguridad
(para tornillo contra
sabotaje) HID 04-0001-03
• 1 lecteur
• 1 notice d'installation
•	Vis mécaniques Phillips 2
3,5 mm x 0,66 (pas) x 12
•	3Vis mécaniques Phillips
autotaraudeuses #6-32 x
0,375"
•	1vis de sécurité anti-intrusion à tête carrée #6 x
0,375"
Recommandés
• 9 flûtes de jonction de fil
•	1 câble, 5-9 conducteurs
(Wiegand ou RS-232),
calibre 22AWG, blindé
• Alimentation c.c. linéaire
•	Boîtier de jonction métallique ou plastique
•	Contact d'autoprotection:
Ademco 945T, Sentrol
1038T, GRI 100T ou 110T ou
Aleph DC-2531
•	Outil de sécurité (pour vis
anti-intrusion) HID 040001-03
•	1 leitora
•	1 manual de instalação
•	2 parafusos Phillips para
aplicação à máquina de
3,5 mm x 0,6 de passo x 12
mm
•	3 parafusos Phillips no 6 de
auto-rosqueamento para
aplicação à máquina de
32 x 0,375 pol.
•	1 parafuso de segurança
de pino no 6 x 0,375 pol.,
anti-violação
Recomenda-se
•	9 emendas de fio
•	1 cabo, condutor 5-9,
(Wiegand ou RS232),
22AWG revestido
•	Fonte de energia CD linear
•	Caixa de junção metálica
ou plástica
•	Interruptor magnético
– Ademco 945T, Sentrol
1038T, GRI 100T ou 110T, ou
Aleph DC2531
•	Ferramenta de segurança
(para o parafuso anti-violação) HID 04-0001-03
•	1 Lesegerät
•	1 Installationshandbuch
•	2 3,5 mm x 12 mm
Sechskantschraube
(Gewindesteigung 6)
•	3 32 x 0,375" Sechskant­
schneidschraube Nr. 6
•	1 0,375" Sechskant­
sicherheitsschraube,
Sabotage-Schutz
Empfohlen
•	9 Kabelverbinder
•	1 Kabel, 5-9 Leiter
(Wiegand oder RS-232),
22 AWG geschirmt
•	Lineare Gleichstromver­
sorgung
•	Kabelkasten aus Metall
oder Plastik
•	Magnetschalter, Ademco
945T, Sentrol 1038T, GRI
100T oder 110T oder Aleph
Dc-2531
•	Sicherheitswerkzeug (für
die Sabotage-Schutz­
schraube) HID 04-0001-03
•	1 lettore
•	1 manuale di installazione
•	2 viti da macchina Philips
3,5 mm x passo 0,6 x
12 mm
•	3 viti da macchina autofilettanti Philips numero
6-32 x 0,375 pollici
•	1 vite di sicurezza a prova
di manomissione Spanner
numero 6-32 x 0,375 pollici
Consigliati
• 9 giunti conduttore
•	1 cavo, 5-9 conduttore
(Wiegand o RS-232),
schermato 22 AWG
•	Alimentatore lineare c.c.
•	Scatola di giunzione
metallica o in plastica
•	Interruttore magnetico
Ademco 945T, Sentrol
1038T, GRI 100T o Aleph
DC-2531
•	Utensile sicurezza (per vite
a prova di manomissione)
HID 04-0001-03
6090-900 Rev. A.5
instalación
HID Corporation
9292 Jeronimo Road
Irvine, California
92618-1905 USA
tel:
+1 (949) 598-1600
U.S. (800) 237-7769
fax:
+1 (949) 598-1690
email:
tech@hidcorp.com
www.hidcorp.com
installation
installation
instalação
installation
IP55
installazione
installation
®
instalación
installation
instalação
installation
installazione
english
®
Wiring diagram
Yellow
Orange
Black
Red
Drain
Brown
Blue
P1-1
P1-2
P1-3
P1-4
P1-5
P1-6
P1-7
Beeper Input
Green LED
Ground
VDD
*Shield Ground
Red LED
Hold
Green
White
Violet
P2-1
P2-2
P2-3
P2-4
P2-5
P2-6
P2-7
**Expansion module
**Expansion module
Wiegand Data 0
Wiegand Data 1
***Open Collector Output
**Expansion module
**Expansion module
* Drain wire can be “data return” line when a separate power supply is
used
** Requires Expansion Module [ RS232, RS485, USB ]
*** Tamper Output
(See section 4 for terminal connections)
español
Diagrama de cableado
Amarillo
Naranja
Negro
Rojo
Malla
Marrón
Azul
P1-1
P1-2
P1-3
P1-4
P1-5
P1-6
P1-7
altavoz
Led verde
Tierra
+CC
*blindaje de tierra
Led rojo
entrada de retención
Verde
Blanco
Violeta
P2-1
P2-2
P2-3
P2-4
P2-5
P2-6
P2-7
**Expansion Module
**Expansion Module
Dato 0 (datos)
Dato 1 (reloj)
***salida a colector abierto
**Expansion Module
**Expansion Module
* Drain wire can be “data return” line when a separate power supply is
used
** Requires Expansion Module [ RS232, RS485, USB ]
*** Tamper Output
(See section 4 for terminal connections)
assembly and disassembly
montaje y desmontaje
montage et démontage
montagem e desmontagem
français
zusammenbau und zerlegung
montaggio e smontaggio
Schéma de câblage
Jaune
Orange
Noir
Rouge
Drain
Brun
Bleu
P1-1
P1-2
P1-3
P1-4
P1-5
P1-6
P1-7
Beeper
LED verte
Masse
+DC
*Masse blindage
LED rouge
Hold
Vert
Blanc
Violet
P2-1
P2-2
P2-3
P2-4
P2-5
P2-6
P2-7
**Expansion Module
**Expansion Module
Données 0
Données 1
***Sortie auxiliaire
**Expansion Module
**Expansion Module
* Drain wire can be “data return” line when a separate power supply is
used
** Requires Expansion Module [ RS232, RS485, USB ]
*** Tamper Output
(See section 4 for terminal connections)
português
preparing
2.44”
6.20 cm
preparación
preparação
preparazione
.156”
.40 cm
2.99”
7.59 cm
4.00”
2.00”
5.08 cm 10.16 cm
4.49”
11.40 cm
1.63”
4.14 cm
2.99”
7.59 cm
1.60”
2.04”
4.06 cm 5.18 cm
2.00”
2.44”
5.08 cm 6.20 cm
verde
branco
violeta
P2-1
P2-2
P2-3
P2-4
P2-5
P2-6
P2-7
**Expansion Module
**Expansion Module
Dados 0 (dados)
Dados 1 (clock)
***(placa presente)
**Expansion Module
**Expansion Module
2.99”
7.59 cm
deutsch
Schaltplan
Gelb
Orange
Schwarz
Rot
Drain
Braun
Blau
P1-1
P1-2
P1-3
P1-4
P1-5
P1-6
P1-7
Signal
Grüne led
Erde
+Gleichstrom
*Schirmerde
Rote Led
Halten
Grün
Weiss
Violett
P2-1
P2-2
P2-3
P2-4
P2-5
P2-6
P2-7
**Expansion Module
**Expansion Module
Daten 0 (Daten)
Daten 1 (Zeit)
***(Karte vorhanden)
**Expansion Module
**Expansion Module
R40/RW400
* Drain wire can be “data return” line when a separate power supply is
used
** Requires Expansion Module [ RS232, RS485, USB ]
*** Tamper Output
(See section 4 for terminal connections)
.156”
.40 cm
R30/RW300
italiano
.156”
.40 cm
R10
R10A
RW100
bíper
LED verde
terra
CA+
*terra do gabinete
LED vermelho
reserva
* Drain wire can be “data return” line when a separate power supply is
used
** Requires Expansion Module [ RS232, RS485, USB ]
*** Tamper Output
(See section 4 for terminal connections)
vorbereitung
3.75”
9.53 cm
P1-1
P1-2
P1-3
P1-4
P1-5
P1-6
P1-7
2.00”
5.08 cm
préparation
Diagrama de ligações
amarelo
laranja
preto
vermelho
dreno
marrom
azul
Schema di collegamento
giallo
arancione
nero
rosa
cavo di terra
marrone
blu
P1-1
P1-2
P1-3
P1-4
P1-5
P1-6
P1-7
Ronzatore
Led verde
terra
TX (trasmissione seriale)
*Schermo di terra
Led rosso
Memoria
verde
bianco
viola
P2-1
P2-2
P2-3
P2-4
P2-5
P2-6
P2-7
**Expansion Module
**Expansion Module
Dato 0 (dato)
Dato 1 (clock)
***(scheda attiva)
**Expansion Module
**Expansion Module
* Drain wire can be “data return” line when a separate power supply is
used
** Requires Expansion Module [ RS232, RS485, USB ]
*** Tamper Output
(See section 4 for terminal connections)
testing
prueba
test
teste
P1-1
P1-2
P1-3
P1-4
P1-5
P1-6
P1-7
testen
testare
Turn power on
Encienda la unidad
Mettez sous tension
Ligar energia
Strom einschalten
Accendere
Test card
Pruebe la tarjeta
Testez avec une carte
Placa de teste
Kartentest
Test
**Expansion
P2-1
**Expansion
P2-2
P2-3
P2-4
P2-5 ***
**Expansion
P2-6
P2-7
**Expansion
Module
Module
Module
Module
* Drain wire can be “data return” line when a separate power supply is
used
** Requires Expansion Module [ RS232, RS485, USB ]
*** Tamper Output
(See section 4 for terminal connections)
P1-1
P1-2
P1-3
P1-4
P1-5
P1-6
P1-7
P2-1
P2-2
P2-3
P2-4
P2-5
P2-6
P2-7
**Expansion Module
**Expansion Module
**Expansion Module
**Expansion Module
* Drain wire can be “data return” line when a separate power supply is
used
** Requires Expansion Module [ RS232, RS485, USB ]
*** Tamper Output
(See section 4 for terminal connections)

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1.1-111
Instance ID                     : uuid:fa4085d1-879f-11da-8abf-00145161ca76
Document ID                     : adobe:docid:indd:6af13a19-8068-11da-bdd0-a50537b4e3aa
Rendition Class                 : proof:pdf
Derived From Instance ID        : 191a3b07-116a-11da-8f9b-f322cbc5a83a
Derived From Document ID        : adobe:docid:indd:b32d939c-0fc3-11da-a728-a7973ae7321e
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00
Manifest Placed Y Resolution    : 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 72.00, 72.00, 300.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:CAE32F1C835B11DA9FB3EA91393AAF39, uuid:6104B339E3EC11D9972AF1D01E351A69, uuid:7CB152AD88D911DAB662A898351BABCD, uuid:7CB152B288D911DAB662A898351BABCD, uuid:C9C76085802C11DA977CDB463F2C5879, uuid:C9C76082802C11DA977CDB463F2C5879, uuid:C9C76088802C11DA977CDB463F2C5879, uuid:C9C76088802C11DA977CDB463F2C5879, uuid:D09DBF0288DD11DA9408CE5516913667, uuid:CAE32F16835B11DA9FB3EA91393AAF39, uuid:8a4c948a-8210-11da-aa23-00145161ca76, uuid:6420C06788D911DAB662A898351BABCD
Manifest Reference Document ID  : uuid:CAE32F1B835B11DA9FB3EA91393AAF39, uuid:9291F63AE3EB11D9972AF1D01E351A69, uuid:7CB152AC88D911DAB662A898351BABCD, uuid:7CB152B088D911DAB662A898351BABCD, uuid:044B2DA4802611DA977CDB463F2C5879, uuid:044B2DA3802611DA977CDB463F2C5879, uuid:2EFFEF61802C11DA977CDB463F2C5879, uuid:2EFFEF61802C11DA977CDB463F2C5879, uuid:D09DBF0188DD11DA9408CE5516913667, uuid:CAE32F13835B11DA9FB3EA91393AAF39, uuid:CAE32F17835B11DA9FB3EA91393AAF39, uuid:6420C06688D911DAB662A898351BABCD
Create Date                     : 2006:01:17 13:26:47-08:00
Modify Date                     : 2006:01:17 13:26:52-08:00
Metadata Date                   : 2006:01:17 13:26:52-08:00
Creator Tool                    : Adobe InDesign CS2 (4.0)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 9800 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 7.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS2 (4.0)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: JQ6630XA

Navigation menu