HID Global 630XA 6130B RK40, 6131B RWK400 iCLASS Readers User Manual 6094 901

Download:
Mirror Download [FCC.gov]
Document ID	735838
Application ID	zwTMsFmXUYTJ1hrcV2GeOw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	24.54kB (306729 bits)
Date Submitted	2006-12-07 00:00:00
Date Available	2006-12-19 00:00:00
Creation Date	2003-06-16 11:13:29
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2003-06-16 11:13:29
Document Title	Microsoft Word - 6094-901.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	aaustad

Installation Guide
iCLASS Reader Models RK40 & RWK400
PARTS INCLUDED
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
Voltage Range:
Current:
Cable distance to Host:
•
•
Op. Temperature:
Open collector output:
1 - iCLASS Keypad Reader
1 - Installation Manual
2 - 3.5mm x .6 pitch x 12mm Phillips machine screws
3 - #6-32 x .375” Phillips self-tapping machine screws
2 - #6 x 1.5” Phillips sheet metal screws
1 - #6-32 x .375” Spanner security screw
Recommended:
•
•
•
•
•
•
•
Up to 10 wire splices *
Cable, 9 conductor, 22AWG, shielded (Wiegand)
Cable , 6 conductor, 22AWG, shielded (Serial)
Linear DC Power Supply
Metal or plastic junction box
Security Tool (for security screw) HID 04-0001-03
Magnetic Tamper switch - Ademco 945T, Sentrol
1038T, GRI 100T or 110T or Aleph DC-2531
* RK40 available with 18” wire pigtail or 10-pos. removable
screw terminal connector. RWK400 includes 8-pos. and 10pos. removable screw terminal connectors.
12VDC (10 - 16VDC).
100mA avg / 220mA peak.
500ft (152m) max – Wiegand.
50ft (15m) max – RS-232.
4000ft (1216m) max – RS-485.
-31°F - +149°F (-35°C – +65°C)
Sink – 40mA, source – 1mA.
Standards:
•
•
Read/Write* capability in ISO 1SO 15693-2 mode with HID
iCLASS credentials.
Read/Write* capability in ISO 1SO 14443-B mode with HID
iCLASS 16KS.
•
Read capability of CSN/UID in ISO 1SO 14443-A1 mode
with HID Mifare and other 3rd party Mifare credentials.
* RK40 is a read only, while RWK400 is a read/write unit.
INSTALLATION
1- Disassemble
A. Remove the screw at the bottom of the unit.
B. Lift the mounting plate out at the bottom side
C. Slide mounting plate down
2- Install Tamper Switch
An internal magnet provides tamper indication when used with a magnetic reed switch connected to an external alarm
system. Locate Switch behind the left side of the mounting plate, centered between the mounting holes.
Electrical Back Box
Wall Surface
An ASSA ABLOY Group company
ASSA ABLOY
_____________________________________________________________________________________________________
HID Corporation 9292 Jeronimo Road Irvine, CA 92618-1905 USA TEL (949) 598-1600 (800) 237-7769 FAX (949) 598-1690
Web page - www.hidcorp.com e-mail – tech@hidcorp.com iClass Keypad Reader Install Manual 6094-901 Rev A Page 1 of 2
Installation Guide
iCLASS Reader Models RK40 & RWK400
3- Install Mounting Plate
Attach the mounting plate onto the back box or a wall surface. Dimensions are in inches (centimeters).
2.000 / 5.08 cm
1.650 / 4.19 cm
0.300 /
0.76 cm
0.156 /
2.000 /
0.40 cm
5.08 cm
1.650 /
3.280 /
4.19 cm
8.33 cm
4.490 /
11.40 cm
0.355 / 0.90 cm
0.175 / 0.44 cm
0.110 / 0.28 cm
1.000 / 2.54 cm
0.080 / 0.20 cm
1.550 / 3.94 cm
1.130 /
2.87 cm
1.550 /
3.94 cm
0.220 / 0.56 cm
MOUNTING PLATE
OPTIONAL SPACER
4- Connecting
Serial Port (Model RWK400 Only)
8 Pin Terminal
Function
Ground
Y / RS-232 TX
Ground
RS485B / RS-232 RX
RS-485A
Ground
DC+
Wiegand Port (Models RK40, RWK400)
10 Pin Terminal
10
Color-coded Pigtail
Violet
Blue
Yellow
Drain
Brown
Orange
White
Green
Black
Red
Function
Open Collector
Hold
Speaker
Shield Ground
Red LED
Green LED
Data 1
Data 0
Ground
+DC (10-16 VDC)
Optional Connections
Drain wire can be used for data return line when a separate power supply is used.
+DC, Return & Drain wires are common between the Wiegand and Serial Ports.
In RS-485 mode, pin 2 must be connected to pin 6 and pin 3 must connected to pin 5 with jumpers at the connector.
5- Testing
A.
B.
Turn Power On – Watch the sign-on LED and hear the speaker tone sequences.
Read Card – Present a valid card to the reader and verify the visual and audio feedbacks.
6- Mounting
Reverse the procedure in step 1 to attach the unit to the mounting plate.
Optional Features
RS232/485 interface/Host Mode - for applications requiring a serial link. See Protocol Document 6090-902 for information
Open Collector Output – controls an external device (13.8VDC Max). See iCLASS Application Note for details
Configuration Options - Configure LED, Speaker, and other features. See How To Order Guide or iCLASS Application Note for details
Hold Input – when asserted, this line either buffers a card read or disables a card read until released, as configured.
FCC WARNING:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation. For proper regulatory compliance, the drain wire
should be disconnected at the power supply end of the cable. The reader is intended to be powered from a limited power source output of a previously certified
power supply. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
An ASSA ABLOY Group company
ASSA ABLOY
_____________________________________________________________________________________________________
HID Corporation 9292 Jeronimo Road Irvine, CA 92618-1905 USA TEL (949) 598-1600 (800) 237-7769 FAX (949) 598-1690
Web page - www.hidcorp.com e-mail – tech@hidcorp.com iClass Keypad Reader Install Manual 6094-901 Rev A Page 2 of 2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2003:06:16 11:13:29-06:00
Modify Date                     : 2003:06:16 11:13:29-06:00
Page Count                      : 2
Creation Date                   : 2003:06:16 17:13:29Z
Mod Date                        : 2003:06:16 17:13:29Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : aaustad
Metadata Date                   : 2003:06:16 17:13:29Z
Creator                         : aaustad
Title                           : Microsoft Word - 6094-901.doc

EXIF Metadata provided by EXIF.tools