HID Global ICLASSRA30A iCLASS SE DECOR Reader User Manual iCLASS DFM Rev C Universal Installation Guide
HID Global Corporation iCLASS SE DECOR Reader iCLASS DFM Rev C Universal Installation Guide
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1795451 |
| Application ID | 05t6aN0p76KC+qHH+hWb0Q== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 102.35kB (1279364 bits) |
| Date Submitted | 2012-09-18 00:00:00 |
| Date Available | 2012-09-18 00:00:00 |
| Creation Date | 2012-09-11 16:28:55 |
| Producing Software | Adobe PDF Library 9.9 |
| Document Lastmod | 2012-09-12 08:45:55 |
| Document Title | iCLASS DFM (Rev C) Universal Installation Guide |
| Document Creator | Adobe InDesign CS5.5 (7.5.3) |
| Document Author: | L Hanna |
INSTALACIÓN INSTALLATION INSTALAÇÃO INSTALLATION INSTALLAZIONE iCLASS SE Décor ® 13.56 MHz Contactless INSTALLATION GUIDE RA30A RPA30A ACCESS flexibility. 6715-901 A.0 iCLASS SE Décor RA30, RPA30A 6715-901 A.0 Componentes Pièces Peças Komponenten Componenti Parts List Parts • • • • • • • • - iCLASS Reader - Installation Manual - 3.5 mm x .6 pitch x 12 mm Phillips machine screws - #6-32 x .375” Phillips self-tapping (mv) machine screws - #6 x 1.5” Phillips sheet metal screws - #6 x .375” Spanner security screw, anti-tamper - Terminal connectors for terminal readers - Base plate Recommended • Up to 13 wire splices (pigtail) • Cable, 5-9 conductor (Wiegand or clock-and-data), 22 or 24 AWG [65 mm or 51 mm] (pigtail) • Linear DC Power supply • Metal or plastic junction box • Security Tool (for anti-tamper screw) HID 04-0001-03 Lista de componentes 1 lector iCLASS 1 manual de instalación 2 tornillos mecánicos Phillips de 3.5 mm x 12 mm, paso 0.6 3 tornillos mecánicos autoperforantes N.º 6 de 32 x 0.375“ 2 tornillos Phillips N.º 6 para metales de 1.5” 1 tornillo de seguridad N.º 6 contra sabotaje de 0.375” para llave inglesa • 2 conectores de borne para lectores de borne • 1 placa base • • • • • • Recomendado: • Un máximo de 13 empalmes para cable (flexible) • Cable, de 5 a 9 conductores (Wiegand o clock-and-data), 22 o 24 AWG [65 mm o 51 mm] (flexible) • Fuente de alimentación lineal de CC • Caja metálica o de plástico para conexiones • Herramienta de seguridad (para tornillo contra sabotaje) HID 04-0001-03 Liste • • • • • • • • des pièces 1 - Lecteur iCLASS 1 - Manuel d’installation 2 - Vis mécaniques cruciformes 3,5 mm x 0,6 pas x 12 mm 3 - Vis mécaniques cruciformes autotaraudeuses Nº 6-32 x 0,375 pouce 2 - Vis à tôle cruciformes Nº 6 x 1,5 pouce 1 - Vis de sécurité inviolable Nº 6 x 0,375 pouce 2 - Connecteurs de bornier pour lecteurs à bornier 1 - Support Recommandés • Jusqu’à 13 embouts de câble (en tire-bouchon) • Câble, 5-9 conducteurs (Wiegand ou clock-and-data), 22 ou 24 AWG [65 mm ou 51 mm] (câble) • Alimentation cc linéaire • Boîtier de jonction métallique ou plastique • Outil de sécurité (pour vis inviolable) HID 04-0001-03 INSTALLATION GUIDE Lista de peças • 1 – Leitor iCLASS • 1 – Manual de instalação • 2 – Parafusos Phillips para aplicação a máquina de 3,5 mm x de passo 0,6 x 12 mm • 3 – Parafusos Phillips de auto-rosqueamento para aplicação a máquina nº 6-32 x 0,375 pol. • 2 – Parafusos Phillips de chapa metálica nº 6 x 1,5 pol. • 1 – Parafuso de segurança de chave de porca nº 6 x 0,375 pol., antiviolação • 2 – Conectores do terminal para os leitores do terminal. • 1 – Placa básica Recomendado • Entrelaçamentos de até 13 cabos (cabo flexível) • Cabo, condutor 5-9 (Wiegand ou clock-and-data), 22 ou 24 AWG [65 mm ou 51 mm] (cabo flexível) • Alimentação DC linear • Caixa de junção de metal ou plástico • Ferramenta de segurança (para o parafuso antiviolação) HID 04-0001-03 Komponenten Elenco • 1 iCLASS Leser • 1 Installationsanleitung • 2 Kreuzschlitzschrauben – 3,5 mm x 12 mm (x 0,6 Zoll Teilung) • 3 Kreuzschlitz-Schneidschrauben – US-Größe Nr. 6-32 x 0,375 Zoll • 2 Kreuzschlitz-Blechschrauben – US-Größe Nr. 6 x 1,5 Zoll • 1 Sicherungsschraube – US-Größe Nr. 6 x 0,375 Zoll • 2 Anschlussstecker für Leser • 1 Grundplatte Empfohlene Komponenten • Bis zu 13 Spleißverbindungen • Kabel, 5-9 Leiter (Wiegand oder clock-and-data), 22 oder 24 AWG [65 mm oder 51 mm], (bewegliches Anschlusskabel) • Lineares Gleichstromnetzteil • Verteilerkasten aus Metall oder Kunststoff parti Un lettore iCLASS Un manuale di installazione Due viti da ferro Phillips da 3,5 mm x 12 mm con passo da 0,6 Viti da ferro autofilettanti Phillips numero # 6 32 x 0,375 pollici Due viti per lamiera Phillips numero 6 x 1,5 pollici Una vite di sicurezza antimanomissione Spanner numero 6 x 0,375 pollici • Due morsettiere per terminali lettore • Una piastra di base • • • • • • Consigliati • Cavo a 13 poli • Cavo, conduttore 5-9 (tipo Wiegand o clock-and-data), schermato 22 o 24 AWG [65 mm o 51 mm] (a tortiglione) • Alimentatore lineare c.c. • Scatola di giunzione metallica o in plastica • Utensile di sicurezza (per viti antimanomissione) HID 04-0001-03 © 2012 HID Global Corporation. All rights reserved. RA30, RPA30A 6715-901 A.0 Especificaciones Spécifications Especificações Spezifikationen Specifiche Specifications PRODUCT BASE PART NUMBER INPUT VOLTAGE (VDC) PRODUCTO NÚMERO DE COMPONENTE BASE TENSIÓN DE ENTRADA (VCC) PRODUIT RÉFÉRENCE DE BASE TENSION D’ALIMENTATION (Vcc) PRODUTO NÚMERO DAS PEÇAS BÁSICAS VOLTAGEM DE ENTRADA (VCC) PRODUKT HAUPTTEILENUMMER EINGANGSSPANNUNG (VDC) PRODOTTO NUMERO PARTE DI BASE TENSIONE IN INGRESSO (V c.c.) RA30A 92A CURRENT CORRIENTE ELÉCTRICA CONSOMMATION CORRENTE STROMSTÄRKE CORRENTE NSC PEAK 75 mA 110 mA 93A NSC = Normal Standby Condition Mounting © 2012 HID Global Corporation. All rights reserved. OPERATING TEMPERATURE CABLE LENGTH UL REF NUMBER TEMPERATURA DE FUNCIONAMIENTO LONGITUD DEL CABLE NÚMERO DE REFERENCIA UL TEMPÉRATURE DE FONCTIONNEMENT LONGUEUR DE CÂBLE RÉF. UL TEMPERATURA DE OPERAÇÃO COMPRIMENTO DO CABO NÚMERO DE REFERÊNCIA UL BETRIEBSTEMPERATUR KABELLÄNGE UL-REFERENZNUMMER TEMPERATURA D’ESERCIZIO LUNGHEZZA CAVO NUMERO DI RIFERIMENTO UL Wiegand = 500 ft 300 ft (-35° - 65° C) 85 mA 120 mA - 22 AWG (152 m) -30° - 150° F 5-16 VDC RPA30A iCLASS SE Décor - 24 AWG (91 m) RS-485 RA30Ex1x2x3 = 4000 ft (1,219.2 m) RPA30AEx1x2x3 UL Reference Number Deciphering x1 Reader Colors: K = Black, G = Gray, W=White x2 Wiring: N = Pigtail, T = Terminal x3 Communications: R = RS-485 Montaje Montage Montagem Montage Installazione INSTALLATION GUIDE iCLASS SE Décor RA30, RPA30A 6715-901 A.0 Cableado Câblage Fiação Verdrahtung Cablaggio Wiring BEEP GRN RTN +VDC SHLD RED HOLD GP101 GP102 OC/TMPR DATA1 DATA0 GP103 GP104 ATTENTION Observe precautions for handling ELECTROSTATIC SENSITIVE DEVICES Pigtail Terminal Description Pigtail Yellow P1-1 Beeper Input Red / Green P2-7 Orange P1-2 Green (GRN) LED Input Tan P2-6 Black P1-3 Ground (RTN) Violet P2-5 Open Collector Output Red P1-4 +VDC White P2-4 ** Wiegand Data 1 / Clock P1-5 Unused Green P2-3 ** Wiegand Data 0 / Data Brown P1-6 Red LED Input Pink P2-2 GPIO3 (RS485-Z) Blue P1-7 Hold Input Gray P2-1 GPIO4 (RS485-Y) ** Description GPIO1 (RS232-T / RS485-A) GPIO2 (RS232-R / RS485-B) Tamper Output. When activated, output syncs to ground (default). Dependent upon reader configuration. See HTOG Wiegand and Clock-and-Data configurations for more information. Flexible Borne Descripción Flexible Borne Amarillo P1-1 Entrada de bíper Rojo/ Verde P2-7 GPIO1 (RS232-T / RS485-A) Naranja P1-2 Entrada para LED Verde (GRN) Canela P2-6 GPIO2 (RS232-R / RS485-B) Negro P1-3 Conexión a tierra Violeta P2-5 Salida de colector abierto Rojo P1-4 +VCC Blanco P2-4 ** Datos Wiegand 1 / Reloj P1-5 Sin uso Verde P2-3 ** Datos Wiegand 0 / Datos Marrón P1-6 Entrada para LED Rojo Rosa P2-2 GPIO3 (RS485-Z) Azul P1-7 Entrada de retención Gris P2-1 GPIO4 (RS485-Y) ** Terminal Descripción Salida de sabotaje. Al activarse, la salida se sincroniza con tierra (predeterminado). Depende de la configuración del lector. Consulte las configuraciones de HTOG Wiegand y Clock-and-Data para obtener más información. INSTALLATION GUIDE © 2012 HID Global Corporation. All rights reserved. RA30, RPA30A 6715-901 A.0 iCLASS SE Décor Câble À bornier Description Câble À bornier Jaune P1-1 Entrée Beeper (BEEP) Rouge/vert P2-7 GPIO1 (RS232-T / RS485-A) Orange P1-2 Entrée LED verte (GRN) Bronze P2-6 GPIO2 (RS232-R / RS485-B) Noir P1-3 Terre (RTR) Violet P2-5 Sortie à collecteur ouvert (OC/TMPR) Rouge P1-4 +Vcc Blanc P2-4 ** Données Wiegand 1 / Clock (DATA1) P1-5 Non utilisé Vert P2-3 ** Données Wiegand 0 / Data (DATA0) Marron P1-6 Entrée LED rouge (RED) Rose P2-2 GPIO3 (RS485-Z) Bleu P1-7 Entrée Hold (HOLD) Gris P2-1 GPIO4 (RS485-Y) ** Description Sortie autoprotection. Lorsqu'elle est activée, la sortie est tirée vers la masse (par défaut). Selon la configuration du lecteur. Pour plus d’informations, voir les configurations HTOG Wiegand et Clock-and-Data. Cabo flexível Terminal Descrição Cabo flexível Terminal Amarelo P1-1 Entrada de bíper Vermelho/verde P2-7 GPIO1 (RS232-T / RS485-A) Laranja P1-2 Entrada de LED verde (VRD) Bronzeie P2-6 GPIO2 (RS232-R / RS485-B) Preto P1-3 Terra (RTN) Violeta P2-5 Saída do coletor aberta Vermelho P1-4 +VDC Branco P2-4 ** Wiegand-Daten 1/Uhr P1-5 Não usado Verde P2-3 ** Dados Wiegand 0 / Dados Marrom P1-6 Entrada de LED vermelho Cor-de-rosa P2-2 GPIO3 (RS485-Z) Azul P1-7 Manter entrada A lousa Cinzento P2-1 GPIO4 (RS485-Y) ** Descrição Saída de tamper. Quando ativada a saída sincroniza com o terra (padrão). Dependente da configuração do leitor. Consulte do HTOG Wiegand e Configurações do Relógio e de Dados para obter mais informações. Pigtail Terminal Beschreibung Pigtail Terminal Gelb P1-1 Beeper Eingang (BEEP) Rot/Grün P2-7 GPIO1 (RS232-T / RS485-A) Orangefarben P1-2 Eingang grüne LED (GRN) Bronze P2-6 GPIO2 (RS232-R / RS485-B) Schwarz P1-3 Erdungsleiter (RTN) Violett P2-5 Open-Collector-Ausgang (OC/TMPR) Rot P1-4 +VDC Weiß P2-4 ** Wiegand-Daten 1 / Uhr (DATA1) P1-5 Nicht verwendet Grün P2-3 ** Wiegand-Daten 0 / Daten (DATA0) Braun P1-6 Eingang rote LED (RED) Rosa P2-2 GPIO3 (RS485-Z) Blau P1-7 Hold-Eingang (HOLD) Grau P2-1 GPIO4 (RS485-Y) ** Beschreibung Manipulationssicherungsausgang. Bei Aktivierung schaltet der Ausgang zur Erde (Standard). Abhängig von Leserkonfiguration. Weitere Informationen siehe HTOG Wiegand- und Clock-and-Data-Konfiguration. Cavo flessibile Terminale Descrizione Cavo flessibile Terminale Giallo P1-1 Ingresso con cicalino Rosso/verde P2-7 GPIO1 (RS232-T / RS485-A) Arancione P1-2 Ingresso LED verde (GRN) Bronzo P2-6 GPIO2 (RS232-R / RS485-B) Nero P1-3 Massa (RTN) Viola P2-5 Uscita collettore aperto Rosso P1-4 +V c.c. Bianco P2-4 ** Wiegand Data 1 / Clock P1-5 Non usato Verde P2-3 ** Wiegand Data 0 / Clock Marrone P1-6 Ingresso LED rosso Rosa P2-2 GPIO3 (RS485-Z) Blu P1-7 Ingresso di tenuta Grigio P2-1 GPIO4 (RS485-Y) ** *** Descrizione Uscita tamper. Quando attivata, uscita a negativo (predefinito). Dipende dalla configurazione del lettore. Per ulteriori informazioni in merito vedere le configurazioni HTOG Wiegand e Clock-and-Data. © 2012 HID Global Corporation. All rights reserved. INSTALLATION GUIDE iCLASS SE Décor RA30, RPA30A Install Reader 6715-901 A.0 Instalación del Lector en la Placa Posterior Installation du Lecteur sur la Plaque Arrière Instalação do Leitor na Placa Traseira Leser an der Rückplatte Anbringen Installazione del Lettore a Contropiastra Junction box not included. Caja para conexiones no incluida. Boîtier de jonction non inclus. Caixa de junção não incluída. Anschlusskasten nicht mit inbegriffen. Scatola di raccordo non inclusa. 1. Join 2. Twist counterclockwise 3. Tighten screws INSTALLATION GUIDE © 2012 HID Global Corporation. All rights reserved. RA30, RPA30A 6715-901 A.0 Power & Testing iCLASS SE Décor Encendido y Prueba Alimentation et Tests Energia e Teste Stromversorgung und Testen Alimentazione e test Turn power on Encienda la unidad Mettre sous tension Ligue a energia Einschalten Accendere Test card Pruebe la tarjeta Tester la carte Teste o cartão Karte testen Provare la tessera © 2012 HID Global Corporation. All rights reserved. INSTALLATION GUIDE iCLASS SE Décor RA30, RPA30A Optional Features • • • 6715-901 A.0 Características opcionales Caractèristiques en option Recursos opcionais Optionale Features Funzioni opzionali Open Collector Output - Controls an external device (16 VDC Max) operating in Host Mode only. Sink - 40mA / Source - 1mA. See the iCLASS Application Note for details. Optical Tamper - A configuration card is necessary to activate the Optical Tamper. Once activated, and when the Escutcheon is removed, the Optical Tamper is activated. Contact HID Technical Support for Optical Tamper options. See Tamper Application Note, AN0112. Configuration Cards - With the use of configuration cards, the reader can be modified to meet the specific requirements of an installation. Configuration options include; audio visual, CSN outputs and keypad outputs (keypad models only). Contact HID Technical Support for all reader configuration options. • Hold Input - when asserted, this line either buffers a card or disables a card read until released, as configured. • alida a colector abierto: controla un dispositivo externo (16 VCC máx.) que funciona únicamente en Modo Host. Disipación de corriente: 40mA / Fuente: 1mA. Para obtener más información, consulte la Nota de Aplicación de iCLASS. Interruptor de sabotaje óptico: la tarjeta de configuración acciona el interruptor de sabotaje óptico. Una vez accionado, cuando se retira la placa posterior del lector, se activa un interruptor de sabotaje óptico. Comuníquese con el Centro de Asistencia Técnica de HID para conocer las opciones de interruptores de sabotaje óptico. Tarjetas de configuración: el uso de las tarjetas de configuración permite que el lector se pueda modificar para cumplir con los requisitos específicos de una instalación. Las opciones de configuración incluyen salidas de audio, visuales, CSN y teclado numérico (únicamente para los modelos que cuentan con esta opción). Comuníquese con el Centro de Asistencia Técnica de HID para conocer todas las opciones de configuración. Entrada de retención: cuando se activa, esta línea almacena una tarjeta en memoria intermedia o anula su configuración de lectura hasta que sea desactivada. • • • • • • • • • • • • • • • ortie à collecteur ouvert - contrôle un dispositif externe ( 16 Vcc max, -40mA). Voir la note d’application iCLASS pour de plus amples détails. Autoprotection optique – Une carte de configuration est nécessaire pour activer l’autoprotection optique. Une fois que celle-ci a été activée, l’autoprotection optique se déclenche lorsque la plaque de montage est enlevée. Contactez le support technique de HID pour connaître les options d’autoprotection optique. Cartes de configuration – Les cartes de configuration permettent de modifier le fonctionnement du lecteur pour satisfaire aux exigences spécifiques d’une installation. Les options de configuration comprennent les fonctions audiovisuelles ainsi que les sorties CSN et les sorties de clavier (modèles à clavier uniquement). Contactez le support technique de HID pour connaître l’ensemble des options de configuration du lecteur. Entrée Hold - Lorsqu’elle est activée, cette ligne met une carte en mémoire tampon ou désactive la lecture de carte lorsque l’entrée est active, selon la configuration définie. aída do coletor aberta – controla o dispositivo externo (máx. 16 VCC) operando somente no modo Host. Dissipador – 40mA / Fonte – 1mA. Veja a observação iCLASS de aplicação para detalhes. Optical Tamper – Um cartão de configuração é necessário para ativar o Optical Tamper (detector ótico). Uma vez acionado, quando se retira a placa traseira do leitor, o Optical Tamper será ativado. Contate o suporte técnico da HID para obter as opções do Optical Tamper. Cartões de configuração – com o uso de cartões de configuração, o leitor pode ser modificado para atender aos requisitos específicos de uma instalação. As opções de configuração incluem áudiovisual, saídas de CSN e saídas de teclado (somente modelos com teclado). Contate o Suporte Técnico HID para obter todas as opções de configuração do leitor. Entrada Hold – quando ativada, essa linha ou armazena um cartão ou desabilita a leitura de um cartão até que seja liberada, conforme configurada. pen-Collector-Ausgang – steuert ein externes Gerät (max. 16 VDC), ausschließlich über serielle Schnittstelle. Sink - 40 mA / Quelle - 1 mA. Einzelheiten sind im iCLASS-Anwendungshinweis enthalten. Wenn nach Aktivierung der Konfigurationskarte die Montageplatte des Lesers entfernt wird, wird eine Manipulationswarnung ausgegeben. Optische Manipulationssicherung – zur Aktivierung der optischen Manipulationssicherung ist eine Konfigurationskarte erforderlich. Wenn nach Aktivierung der Konfigurationskarte die Montageplatte des Lesers entfernt wird, wird eine Manipulationswarnung ausgegeben. Informationen zu den Konfigurationsoptionen der optischen Manipulationssicherung sind über den technischen Support von HID erhältlich. Konfigurationskarten – durch die Verwendung von Konfigurationskarten kann der Leser modifiziert werden, um die jeweiligen Anforderungen einer Installation zu erfüllen. Zu den Konfigurationsoptionen gehören audiovisuelle Einstellung, CSN-Ausgänge und Tastenfeld-Ausgänge (nur bei Modellen mit Tastenfeld). Informationen zu den Konfigurationsoptionen der Leser sind über den technischen Support von HID erhältlich. Hold-Eingang – wenn diese Funktion aktiviert ist, werden die Kartendaten entweder zwischengespeichert oder die Lesekonfiguration der Karte wird gesperrt, je nach Konfiguration. • Uscita collettore aperto – Controlla un dispositivo esterno (massimo 16 V c.c.) che funziona solo in modalità host. Sink - 40mA / Source - 1mA. Per dettagli in merito, vedere la nota applicativa iCLASS. • Tamper ottico – per l’attivazione del tamper ottico è necessaria una tessera di configurazione. Una volta attivato, se la piastra posteriore viene rimossa, il dispositivo viene attivato. Contattare il supporto tecnico HID per opzioni relative al tamper ottico. • Tessere di configurazione – tali tessere consentono di modificare il lettore in modo da rispondere agli specifici requisiti di un’installazione. Le opzioni di configurazione includono: audio-visivo, output del numero di serie della scheda e output della tastiera (solo per modelli con tastiera). Contattare il supporto tecnico HID per tutte le opzioni di configurazione del lettore. • Ingresso di tipo hold – Quando viene attivata, questa linea memorizza in un buffer una tessera o disattiva la lettura della tessera fino al rilascio, come configurato. INSTALLATION GUIDE © 2012 HID Global Corporation. All rights reserved. 6715-901 A.0 RA30, RPA30A iCLASS SE Décor Intentional Blank © 2012 HID Global Corporation. All rights reserved. INSTALLATION GUIDE UL Connect only to a Listed Access Control / Burglary power-limited power supply. These readers are intended to be used with listed (UL294) control equipment. Only the Wiegand communication protocol has been investigated by UL. CAUTION: Any changes or modifcations to this devise not explicitly approved by the manufacturer could void your authority to operate this equipment. FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Canada Radio Certification This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. CE Marking HID Global hereby declares that these proximity readers are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Por el presente, HID Global declara que estos lectores de proximidad cumplen con los requisitos esenciales y otras disposiciones relevantes de la Directiva 1999/5/EC. HID Global déclare par la présente que ces lecteurs à proximité sont conformes aux exigences essentielles et aux autres stipulations pertinentes de la Directive 1999/5/CE. A HID Global, por meio deste, declara que estes leitores de proximidade estão em conformidade com as exigências essenciais e outras condições da diretiva 1999/5/EC. HID Global bestätigt hiermit, dass die Leser die wesentlichen Anforderungen und anderen relevanten Bestimmungen der Richtlinie 1999/5/EG erfüllen. HID Global dichiara che i lettori di prossimità sono conformi ai requisiti essenziali e ad altre misure rilevanti come previsto dalla Direttiva europea 1999/5/EC. Download copies of the R&TTE Declaration of Conformity (DoC) at http://certifications.hidglobal.com. ACCESS experience. hidglobal.com © 2012 HID Global Corporation. All rights reserved. HID GLOBAL, HID, the HID logo, iCLASS, multiCLASS and Indala are the trademarks or registered trademarks of HID Global Corporation, or its licensors, in the U.S. and other countries. HID Global North America 15370 Barranca Parkway Irvine, CA 92618 USA Phone: 800 237 7769 Fax: 949-732-2120 6715-901 Rev A.0 US Patents: 5952935, 7124943, 7219837, 7439862, 7180403, 6058481 and 6337619. Check reader label for current regulatory approvals. Asia Pacific 19/F 625 King’s Road NorthPoint, Island East Hong Kong Phone: 852 3160 9800 Fax: 852 3160 4809 Support: support.hidglobal.com Europe, Middle East & Africa Phoenix Road Haverhill, Suffolk CB9 7AE England Phone: +44 (0) 1440 714 850 Fax: +44 (0) 1440 714 840
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Author : L Hanna Create Date : 2012:09:11 16:28:55-06:00 Modify Date : 2012:09:12 08:45:55-06:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Instance ID : uuid:c2c832b6-28d5-45f5-a080-b151f9aece5a Document ID : xmp.did:8B85EC982EF1E1118A29C61A422C43AF Original Document ID : adobe:docid:indd:dea6b38b-55dd-11de-b5b7-9e089606016f Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:EABAA5962EF1E1118A29C61A422C43AF Derived From Document ID : xmp.did:EF48BAAD5F8DE111B2AEFA712C0744AD Derived From Original Document ID: adobe:docid:indd:dea6b38b-55dd-11de-b5b7-9e089606016f Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:23CBAE7621BFDE119674F5B727569C58, xmp.iid:24CBAE7621BFDE119674F5B727569C58, xmp.iid:23DF6E53BF0ADF119515E85C84E6DAAB, xmp.iid:24DF6E53BF0ADF119515E85C84E6DAAB, xmp.iid:F19470E2A012DF11AF7895A41799B1CC, xmp.iid:F29470E2A012DF11AF7895A41799B1CC, xmp.iid:4C579D6BD114DF118A3BDFF04D9B3BA8, xmp.iid:4D579D6BD114DF118A3BDFF04D9B3BA8, xmp.iid:27766E58E885DF1193B1EE9805BC7A2A, xmp.iid:28766E58E885DF1193B1EE9805BC7A2A, xmp.iid:29766E58E885DF1193B1EE9805BC7A2A, xmp.iid:2A766E58E885DF1193B1EE9805BC7A2A, xmp.iid:F40B450A1586DF11BF73F438CAB3F5B7, xmp.iid:038DF6652089DF11AC2C8AC9F068BBA5, xmp.iid:0A8DF6652089DF11AC2C8AC9F068BBA5, xmp.iid:0B8DF6652089DF11AC2C8AC9F068BBA5, xmp.iid:5378D9D1B6A4DF118052DD11806C0103, xmp.iid:F53211C466A5DF11855897CE179C03B9, xmp.iid:F63211C466A5DF11855897CE179C03B9, xmp.iid:11AEBD9492ACDF11AEBC9FBC2CCBE58D, xmp.iid:13AEBD9492ACDF11AEBC9FBC2CCBE58D, xmp.iid:16AEBD9492ACDF11AEBC9FBC2CCBE58D, xmp.iid:8A6F15AB30B1DF119E629177D3297BFC, xmp.iid:8B6F15AB30B1DF119E629177D3297BFC, xmp.iid:029FC2CD53CADF11A3F68BA01C116377, xmp.iid:039FC2CD53CADF11A3F68BA01C116377, xmp.iid:728E3238D6E5DF118A9B8EB37D188374, xmp.iid:738E3238D6E5DF118A9B8EB37D188374, xmp.iid:4B5AE18B55E7DF11A061DBEC333D2D95, xmp.iid:4D5AE18B55E7DF11A061DBEC333D2D95, xmp.iid:4E5AE18B55E7DF11A061DBEC333D2D95, xmp.iid:4F5AE18B55E7DF11A061DBEC333D2D95, xmp.iid:DCF24EE73CE8DF11ACF6F41A53979099, xmp.iid:DDF24EE73CE8DF11ACF6F41A53979099, xmp.iid:DEF24EE73CE8DF11ACF6F41A53979099, xmp.iid:DFF24EE73CE8DF11ACF6F41A53979099, xmp.iid:E0F24EE73CE8DF11ACF6F41A53979099, xmp.iid:E1F24EE73CE8DF11ACF6F41A53979099, xmp.iid:944D00E64AECDF118323D5820A8F5D98, xmp.iid:954D00E64AECDF118323D5820A8F5D98, xmp.iid:30918DB2F3ECDF119485E45D08D9DDC0, xmp.iid:31918DB2F3ECDF119485E45D08D9DDC0, xmp.iid:B2542C56D7EDDF11A718CFDC83E74B28, xmp.iid:B3542C56D7EDDF11A718CFDC83E74B28, xmp.iid:6E8FED7C03F1DF11A966B245C80DFBD4, xmp.iid:6F8FED7C03F1DF11A966B245C80DFBD4, xmp.iid:4158857F1DF4DF118AAAA2163053244E, xmp.iid:4258857F1DF4DF118AAAA2163053244E, xmp.iid:F33E253C52FEDF118468AF882BDF0C15, xmp.iid:F43E253C52FEDF118468AF882BDF0C15, xmp.iid:B76FD478D21CE0119DA8CED4C0097DAD, xmp.iid:B86FD478D21CE0119DA8CED4C0097DAD, xmp.iid:B96FD478D21CE0119DA8CED4C0097DAD, xmp.iid:BA6FD478D21CE0119DA8CED4C0097DAD, xmp.iid:928F7CE9D91CE011BA17CE1A56427955, xmp.iid:938F7CE9D91CE011BA17CE1A56427955, xmp.iid:948F7CE9D91CE011BA17CE1A56427955, xmp.iid:6CD1C163A030E011AA15D775758E8456, xmp.iid:6DD1C163A030E011AA15D775758E8456, xmp.iid:6ED1C163A030E011AA15D775758E8456, xmp.iid:76188D2A7A34E0119D16EB4EDEF4F646, xmp.iid:77188D2A7A34E0119D16EB4EDEF4F646, xmp.iid:78188D2A7A34E0119D16EB4EDEF4F646, xmp.iid:79188D2A7A34E0119D16EB4EDEF4F646, xmp.iid:7D188D2A7A34E0119D16EB4EDEF4F646, xmp.iid:779958805635E011B7D49CB9C71F9DA3, xmp.iid:789958805635E011B7D49CB9C71F9DA3, xmp.iid:799958805635E011B7D49CB9C71F9DA3, xmp.iid:7821769AFA35E011BC58A664DFEDF702, xmp.iid:770C985A1F36E01180C58A45E1018394, xmp.iid:53EB21AE2C36E0119DBC86CBB06A4564, xmp.iid:55EB21AE2C36E0119DBC86CBB06A4564, xmp.iid:D597FBC6DA5EE011BCBBBCDB5A051892, xmp.iid:D697FBC6DA5EE011BCBBBCDB5A051892, xmp.iid:D797FBC6DA5EE011BCBBBCDB5A051892, xmp.iid:DA97FBC6DA5EE011BCBBBCDB5A051892, xmp.iid:BF2B0682257BE011B440F4888312AE7D, xmp.iid:C02B0682257BE011B440F4888312AE7D, xmp.iid:FE0EE33AE67BE011A0C7C37E18CA5E47, xmp.iid:FF0EE33AE67BE011A0C7C37E18CA5E47, xmp.iid:A9499D12ECB3E011964DE2749AD45A86, xmp.iid:AA499D12ECB3E011964DE2749AD45A86, xmp.iid:005F108798B4E0118F83D2FC1F65C03F, xmp.iid:015F108798B4E0118F83D2FC1F65C03F, xmp.iid:26BB1D7725D0E0119B09CBAD391516B2, xmp.iid:27BB1D7725D0E0119B09CBAD391516B2, xmp.iid:512CA4E625D0E0119B09CBAD391516B2, xmp.iid:1796A19865D2E011B7A0F17DE064669A, xmp.iid:4C1BD8E665D2E011B7A0F17DE064669A, xmp.iid:B9F5B2AD5F8DE111B2AEFA712C0744AD, xmp.iid:EF48BAAD5F8DE111B2AEFA712C0744AD, xmp.iid:7D83218D608DE111B2AEFA712C0744AD, xmp.iid:4349F131618DE111B2AEFA712C0744AD, xmp.iid:A3BF8D5838DBE11188FEF2F1D2F2E4ED, xmp.iid:EABAA5962EF1E1118A29C61A422C43AF, xmp.iid:8B85EC982EF1E1118A29C61A422C43AF, xmp.iid:CE22D4A334F1E1118A29C61A422C43AF, xmp.iid:A3A896A6DAF6E111AA9591CA7BDC42A5, xmp.iid:42466463E8FAE111B789B4CE854C3384, xmp.iid:889630AC94FBE11197DDB1FB5C3DF043, xmp.iid:4D5386B15FFCE11191F9C84E63861022, xmp.iid:4F6CC40660FCE11191F9C84E63861022 History When : 2009:10:22 09:42:11-06:00, 2009:10:22 09:42:11-06:00, 2010:01:26 14:11:09-07:00, 2010:01:26 14:50:29-07:00, 2010:02:05 14:53:24-07:00, 2010:02:05 15:31:15-07:00, 2010:02:08 09:45:53-07:00, 2010:02:08 09:53:02-07:00, 2010:07:02 08:44:40-06:00, 2010:07:02 08:44:40-06:00, 2010:07:02 10:58:54-06:00, 2010:07:02 11:01:30-06:00, 2010:07:02 14:04:36-06:00, 2010:07:06 11:03:28-06:00, 2010:07:06 12:45:36-06:00, 2010:07:06 12:46:50-06:00, 2010:08:10 13:38:15-06:00, 2010:08:11 10:37:43-06:00, 2010:08:11 12:03:25-06:00, 2010:08:20 13:39-06:00, 2010:08:20 15:48:57-06:00, 2010:08:20 16:22:15-06:00, 2010:08:26 10:40:43-06:00, 2010:08:26 10:42:47-06:00, 2010:09:27 10:25:12-06:00, 2010:09:27 11:02:02-06:00, 2010:11:01 10:36:47-06:00, 2010:11:01 10:36:47-06:00, 2010:11:03 12:09:09-06:00, 2010:11:03 12:28:17-06:00, 2010:11:03 12:57:19-06:00, 2010:11:03 13:12:04-06:00, 2010:11:04 11:56:52-06:00, 2010:11:04 13:46:34-06:00, 2010:11:04 13:56:05-06:00, 2010:11:04 14:08:17-06:00, 2010:11:04 14:20:32-06:00, 2010:11:04 14:47:36-06:00, 2010:11:09 14:47:07-07:00, 2010:11:09 14:59:37-07:00, 2010:11:10 10:55:26-07:00, 2010:11:10 11:15:29-07:00, 2010:11:11 14:04:56-07:00, 2010:11:11 14:07:49-07:00, 2010:11:15 15:32:16-07:00, 2010:11:15 15:34:46-07:00, 2010:11:19 13:42:17-07:00, 2010:11:19 13:44:40-07:00, 2010:12:02 13:27:47-07:00, 2010:12:02 13:54:52-07:00, 2011:01:10 08:58:31-07:00, 2011:01:10 09:04:45-07:00, 2011:01:10 09:05:24-07:00, 2011:01:10 09:07:59-07:00, 2011:01:10 09:51:47-07:00, 2011:01:10 09:51:47-07:00, 2011:01:10 09:54:26-07:00, 2011:02:04 13:50:24-07:00, 2011:02:04 13:50:24-07:00, 2011:02:04 14:25:54-07:00, 2011:02:09 11:26:52-07:00, 2011:02:09 11:26:52-07:00, 2011:02:09 11:47:22-07:00, 2011:02:09 12:17:12-07:00, 2011:02:09 16:16:50-07:00, 2011:02:10 13:44:05-07:00, 2011:02:10 13:48:05-07:00, 2011:02:10 13:49:22-07:00, 2011:02:11 09:18:47-07:00, 2011:02:11 13:43:23-07:00, 2011:02:11 15:19:17-07:00, 2011:02:11 15:21:41-07:00, 2011:04:04 10:44:41-06:00, 2011:04:04 10:44:41-06:00, 2011:04:04 10:59:17-06:00, 2011:04:04 12:44-06:00, 2011:05:10 11:43:18-06:00, 2011:05:10 12:11:49-06:00, 2011:05:11 13:18:17-06:00, 2011:05:11 13:22:06-06:00, 2011:07:21 16:52:12-06:00, 2011:07:21 16:56:16-06:00, 2011:07:22 15:20:29-06:00, 2011:07:22 15:22:16-06:00, 2011:08:26 14:53:35-06:00, 2011:08:26 14:53:35-06:00, 2011:08:26 14:56:42-06:00, 2011:08:29 11:37:41-06:00, 2011:08:29 11:39:52-06:00, 2012:04:23 10:16:27-06:00, 2012:04:23 10:16:27-06:00, 2012:04:23 10:22:42-06:00, 2012:04:23 10:27:18-06:00, 2012:07:31 11:51:26-06:00, 2012:08:28 10:36:59-06:00, 2012:08:28 10:37:06-06:00, 2012:08:28 11:20:19-06:00, 2012:09:04 15:51:16-06:00, 2012:09:09 19:39:40-06:00, 2012:09:10 16:12:56-06:00, 2012:09:11 16:26:12-06:00, 2012:09:11 16:28:35-06:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5, Adobe InDesign 7.5 History Changed : /, /metadata, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /metadata, /;/metadata, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Metadata Date : 2012:09:12 08:45:55-06:00 Creator Tool : Adobe InDesign CS5.5 (7.5.3) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 6663 bytes, use -b option to extract), (Binary data 9700 bytes, use -b option to extract) Format : application/pdf Title : iCLASS DFM (Rev C) Universal Installation Guide Creator : L Hanna Rights : © 2009 HID Global Corporation. All rights reserved. Marked : True Web Statement : www.hidglobal.com Startup Profile : Print Doc Change Count : 2563 Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 10EXIF Metadata provided by EXIF.tools