HID Global SMARTID SmartID 803xD User Manual
HID Global Corporation SmartID 803xD Users Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 921068 |
| Application ID | eFnvcQ01T8gVUYdHoZ67Ug== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Microsoft Word - pdf |
| Filesize | 94.13kB (1176577 bits) |
| Date Submitted | 2008-03-28 00:00:00 |
| Date Available | 2008-03-29 00:00:00 |
| Creation Date | 2008-03-31 07:38:56 |
| Producing Software | Acrobat Distiller 8.0.0 (Windows) |
| Document Lastmod | 2008-03-31 07:38:56 |
| Document Title | Users Manual |
| Document Creator | PScript5.dll Version 5.2 |
9292 Jeronimo Road Irvine, CA 92618-1905 SmartID and Smar INSTALLATI Document Number 8030 © 2008 HID GLOBAL CORPORATION. AL SmartID Proximity Reader - 8030-901, Rev A.0 SmartID Proximity Reader - 8030-901, Rev A.0 Contacts Americas HID Global Corporation (California, USA) Email: tech@hidcorp.com Main: (949) 598-1600 Support: 1-800-237-7769 Fax: (949) 598-1690 Europe, Middle East and Africa HID Global Corporation, Ltd. (Haverhill, UK) Email: eusupport@hidcorp.com Main: +44 (0) 1440 714 850 Support: +44 (0) 1440 711 822 Fax: +44 (0) 1440 714 840 Asia-Pacific HID Global Corporation Asia Pacific Ltd. (Hong Kong) Email: asiasupport@hidcorp.com Main: (852) 3160 9800 Support: (852) 3160 9802 Fax: (852) 3160 4809 Page 2 of 19 February 13, 2008 © 2008 HID Global Corporation. All rights reserved. February 13, 2008 © 2008 HID Global Corporation. All rights rese SmartID Proximity Reader - 8030-901, Rev A.0 SmartID Proximity Reader - 8030-901, Rev A.0 Contents 6.5 DGT/NCC 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變 更頻率、加大功率或變更原設計之特性及功能。低功率射頻電機之使用不得影響飛 航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方 得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機 須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 According to "Administrative Regulations on Low Power Radio Waves Radiated Devices" Without permission granted by the DGT, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to a approved low power radiofrequency devices. The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices. Products List................................................................... Overview ......................................................................... 2.1 Mullion Mounting.................................................. 2.2 Indications ........................................................... 2.3 Connections......................................................... 2.4 Output Protocols .................................................. 2.5 Security................................................................ Specifications ................................................................. Timing.............................................................................. Installation Instructions ................................................. 5.1 Wall Mounting Drawing (All Models) .................... 5.2 Conductor Connections (All Models) ................... 5.3 Tamper Switch - Optional .................................... 5.4 Switch Box Mounting Plate - Optional.................. 5.5 Mullion Reader Mounting Plate – Spacer ............ Regulatory....................................................................... 6.1 UL ........................................................................ 6.2 FCC / Canada Radio Certification........................ 6.3 CE Marking.......................................................... 6.4 Asia and Pacific Rim............................................ 6.5 DGT/NCC ............................................................ Contacts .......................................................................... List of Figures Figure 1 Mullion Mounting ............................................................. Figure 2 Tamper Switch ................................................................ Figure 3 Mounting Plate Step 1 and 2 ........................................... Figure 4 Mounting Plate Step 3 and 4 ........................................... Figure 5 Mounting Plate Spacer .................................................... Page 18 of 19 February 13, 2008 © 2008 HID Global Corporation. All rights reserved. February 13, 2008 © 2008 HID Global Corporation. All rights rese SmartID Proximity Reader - 8030-901, Rev A.0 Products List This guide is applicable for the following SmartID and SmartTRANS products: HID Part HID Model Description Number *8030xyzz S10 SmartID Mullion Reader *8045xyzz SK10 SmartID Mullion Keypad Reader SmartID Proximity Reader - 8030-901, Rev A.0 Regulatory 6.1 UL These proximity readers are intended to be powered from a output of a previously certified power supply. These readers used with listed (UL294) control equipment. **8100xyzz SP10 SmartTRANS Mullion Reader with HID/AWID Prox **8110xyzz SPK10 SmartTRANS Mullion Keypad Reader with HID/AWID Prox ***8140xyzz SP10 SmartTRANS Mullion Reader with Indala Prox ***8141xyzz SPK10 SmartTRANS Mullion Keypad Reader with Indala Prox Notes: ‘x’ = Revision of Main Board, ‘y’ = color of plastic housing and ‘zz’ = application * UL Listed to UL 294. ** ETL Listed to UL 294 – UL Listing to UL 294 Pending. *** UL Listing Pending. 6.2 FCC / Canada Radio Certification These devices comply with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This harmful interference, and (2) This device must accept any i including interference that may cause undesired operation. modifications not expressly approved by the party responsi void the user's authority to operate the equipment. Le fonctionnement est soumis aux deux conditions suivante peut pas causer de perturbations nuisibles et (2) ce disposi perturbation quelconque qu’il reçoit, y compris des perturba provoquer un fonctionnement indésirable. Les changement n’ayant pas été expressément approuvés par la partie resp conformité peuvent faire perdre à l’utilisateur l’autorisation d matériel. Accessories: HID Part Manual Number Section Description This Category II radiocommunication device complies wit Standard RSS-310. 500-0300 Tamper Switch Ce dispositif de radiocommunication de catégorie II respe d’Industrie Canada. The Carrier Frequencies and output power are as follows : 5.3 500-8090 5.4 Mullion SPMD – Switch Box Mounting Plate 500-9287 5.5 Mullion Reader Mounting Plate – Spacer The accessories are not listed to UL294. Accessories are compatible with all readers in this manual. 803xD, 810xD 13.56MHz -6.5 810xD 125kHz <-4d 6.3 CE Marking HID Global hereby declares that these proximity readers ar essential requirements and other relevant provisions of Dire 6.4 Asia and Pacific Rim Pending Page 4 of 19 February 13, 2008 © 2008 HID Global Corporation. All rights reserved. February 13, 2008 © 2008 HID Global Corporation. All rights rese SmartID Proximity Reader - 8030-901, Rev A.0 5.5 Mullion Reader Mounting Plate – Spacer The sizes in the drawing are in millimeters, 1 mm is 0.039 in. SmartID Proximity Reader - 8030-901, Rev A.0 Overview The SmartID 13.56MHz and SmartTRANS 13.56MHz + 12 slim door mountable design to match any installation enviro LED’s and buzzer allow the SmartID Readers to be mounte The SmartID reader accepts 5 to 24 Volts DC. The reader o Wiegand, Clock-and-Data (Magstripe ABA / ISO7811), RS2 hardware interfaces.. The 5 Volt DC capabilities allow the re reader systems without rewiring or pulling new cables. The high reliability, consistent read characteristics and low powe The SmartID reader family includes RS232/RS422/RS485 read-only and read/write operations. Standard capabilities include host system controlled red an buzzer. 2.1 Mullion Mounting Ideally suited for mullion-mounted door installations or any f not cover junction box). An optional single-gang electrical b available. 2.2 Indications When a card is read successfully, the card data is sent to th buzzer sounds a short 3KHz beep. Both LED’s and the buz by the host system. 2.3 Connections The SmartID reader family has a flexible and reliable conne space for the cable and the connector within the SmartID ho with silicone to withstand harsh environmental conditions. 2.4 Output Protocols The SmartID reader family operates with any facility, system scheme. The data output format, contents and length are d personalization of the card or configuration of the reader. The readers are intended for connection to an Access Cont compatibility to the reader is referenced in the control unit’s 2.5 Security Figure 5 Mounting Plate Spacer Page 16 of 19 The SmartID reader family offers high security challenge re protect the RFID air interface against various attack scheme playback attacks. February 13, 2008 © 2008 HID Global Corporation. All rights reserved. February 13, 2008 © 2008 HID Global Corporation. All rights rese SmartID Proximity Reader - 8030-901, Rev A.0 SmartID Proximity Reader - 8030-901, Rev A.0 Specifications PRODUCT SmartID INPUT VOLTAGE 5-24 VDC POWER Avg 600 mW Peak 1000 mW OPERATING TEMPERATURE CABLE DISTANCE -22° - 140°F (-30° - 60° C) Wiegand 500 ft - 18 AWG (153 m) 300 ft - 20 AWG (91 m) 200 ft - 22 AWG (61 m) Clock-and-Data 82 ft - 22 AWG (25 m) RS232 50 ft (15.24 m) RS485 4000 ft (1,219.2 m) Recommended cable type: Stranded conductor with overall stranded shield or equivalent. SmartTRANS HID / AWID Avg 1400 mW Peak 2100 mW Figure 4 Mounting Plate Step 3 and 4 Page 6 of 19 February 13, 2008 © 2008 HID Global Corporation. All rights reserved. February 13, 2008 © 2008 HID Global Corporation. All rights rese SmartID Proximity Reader - 8030-901, Rev A.0 5.4 Switch Box Mounting Plate - Optional The sizes in the drawing are in millimeters, 1 mm is 0.039 in. SmartID Proximity Reader - 8030-901, Rev A.0 SmartTRANS Indala Prox Avg 1300 m Peak 1600 3.1.1 ISO Card Read Range ISO14443 up to 1.6 in (4 cm) DESFire up to 1.6 in (4 cm) 3.1.2 Interface Inputs EMC Prot. 10K ohm pull-ups Outputs EMC Prot. open drain 0.5 A/max 3.1.3 Wiegand Signal Levels Voh = Output Voltage idle high Vol = Output Voltage active low Figure 3 Mounting Plate Step 1 and 2 Page 14 of 19 February 13, 2008 © 2008 HID Global Corporation. All rights reserved. February 13, 2008 © 2008 HID Global Corporation. All rights rese SmartID Proximity Reader - 8030-901, Rev A.0 3.1.4 Reader Output Interface and Pull-up Resistors The SmartID readers provide true open collector outputs for Wiegand, Clock-andData, ABA track 2 emulation, meaning the data output is not voltage driven. External pull-up resistors are required when the controller does not provide internal pull-up resistors. The typical value for the pull-up resistors is 1kOhm. The recommended position to place the pull-up resistors is at the controller side. The pull-up resistor #1 connects form Data/D1 (reader connector pin 3) to a 5 volt reference. The pull-up resistor #2 connects form Clock/D0 (reader connector pin 4) to a 5 volt reference. SmartID Proximity Reader - 8030-901, Rev A.0 5.3 Tamper Switch - Optional Figure 2 Tamper Switch Page 8 of 19 February 13, 2008 © 2008 HID Global Corporation. All rights reserved. February 13, 2008 © 2008 HID Global Corporation. All rights rese SmartID Proximity Reader - 8030-901, Rev A.0 5.2 Conductor Connections (All Models) SmartID Proximity Reader - 8030-901, Rev A.0 Clock-in-Data (ABA) Wiegand RS232 RS422 RS485 Green LED input Green LED input Green LED input** Green LED input** Green LED input** Red LED input Red LED input Red LED input** Red LED input** Red LED input** Data D1 Do not connect TXA TRX Clock D0 TXD TXB TRX Buzzer input Buzzer input Do not connect RXA Do not Connect Do not Connect Do not Connect RXD RXB Do not Connect Ground Ground Ground Ground Ground Power 5 to 24VDC Power 5 to 24VDC Power 5 to 24VDC Power 5 to 24VDC Power 5 to 24VDC Timing CAUTION: 5 VDC is minimum voltage at reader connector pins. Tamper contact (optional): rating 1A 30 VDC. ** LED input only valid in read-only applications. Page 12 of 19 February 13, 2008 © 2008 HID Global Corporation. All rights reserved. February 13, 2008 © 2008 HID Global Corporation. All rights rese SmartID Proximity Reader - 8030-901, Rev A.0 SmartID Proximity Reader - 8030-901, Rev A.0 Installation Instructions 5.1 Wall Mounting Drawing (All Mode 1. Drill two holes for mounting the reader (see Figure 1 Mullion Mounting, page 7). Do not mount readers less than 20 cm (7.87 in) from each other. Make sure that enough room to connect the cable is allowed. Protect the cable against sharp edges and any damage from chaffing. The drawing dimensions are in millimeters. 1 mm equals 0.039 inch 2. Remove the Terminal Connector 8 pin from the back of the reader. Use a small flat head screwdriver to loosen all terminals. The end of the cable should be prepared by cutting it back to expose the wires and each end should be twisted to eliminate any loose or frayed wires. 3. Connect the wires to the reader inline with the connector assignments. Wire ends outside the shielding and optional permanent LED links should be kept as short as possible. Twist the connector a few times to twine the wire ends avoiding differential mode interference on the data lines. Note: Wires at the connector must be kept as short as possible: long, unshielded connections will reduce the sensitivity of the reader. 4. After wiring the reader and the Host system, the reader is ready to be tested. Apply power and present a card to the reader. The green LED should flash and the buzzer should beep indicating a read. If the Host system is connected to the red and green LED inputs these should follow the functionality of the Host system. 5. Secure the reader using the appropriate screws. Mount the black cover (sticker) and mount the cap over the mounting hole. Figure 1 Mullion Mounting Page 10 of 19 February 13, 2008 © 2008 HID Global Corporation. All rights reserved. February 13, 2008 © 2008 HID Global Corporation. All rights rese
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2008:03:31 07:38:56-04:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2008:03:31 07:38:56-04:00 Producer : Acrobat Distiller 8.0.0 (Windows) Format : application/pdf Creator : Title : Document ID : uuid:cc589ec3-5750-4c67-af60-15861ca45b0b Instance ID : uuid:152616c7-7e0b-49df-be40-fa38c112bdf7 Page Count : 10 Author :EXIF Metadata provided by EXIF.tools