HMD global TA-1044 Smart Phone User Manual

Get started

Nokia 5

USB micro-B USB-C

TA-1027/TA-1044 EN 1.0

Plug a compatible charger into a wall outlet, and

connect the cable to your phone. Your phone

supports the USB micro-B cable. You can also

key until the phone vibrates. The phone guides

you through the setup.

1. Open the SIM tray and memory card tray by

putting the provided tray opener into the holes

next to the trays.

2. Put the nano-SIM into the slot 1 located on the

tray with the contact area face down. If you have

a second SIM, put it into the slot 2. If you have a

device, and may corrupt data stored on the card.

For a printable user guide, online user guide, and

troubleshooting help, go to www.nokia.com/

1. Insert the SIM and memory

card

2. Charge the battery and switch

your phone on

3. Learn more about your new

Nokia

Front camera

Power/Lock key

Product and safety info

Important: We invite you to read the enclosed instructions before installing

your equipment. For valuable information on the safe use of the device and

battery, read the Product and safety info booklet before you take your device into

You can only use your device on the GSM 850/900/1800/1900; WCDMA 1/2/4/5/8;

LTE 2/3/4/7/12/17/28/38 networks. You need a subscription with a service provider.

Important: 4G/LTE might not be supported by your network service provider

or by the service provider you are using when traveling. In these cases, you

Maximum transmit power

GSM 900 33 dBm

DCS 1800 30 dBm

WCDMA FDD I 24.5 dBm

WCDMA FDD VIII 24 dBm

LTE Band 3 24 dBm

LTE Band 7 24 dBm

LTE Band 28 24 dBm

LTE Band 38 24 dBm

Bluetooth 9 dBm

device to the nearest authorised service facility.

Charge your device with FC0102 charger. HMD Global may make additional battery or

charger models available for this device. Third-party chargers that comply with the

applicable USB requirements, and that can connect to your device USB connector,

may also be compatible. Some of the accessories mentioned in this user guide, such

as charger, headset, or data cable, may be sold separately.

Note: The device is restricted to indoor use only when operating in the 5150 to

5350 MHz frequency range in the following countries:

The surface of this device is nickel-free.

Use only compatible memory cards approved for use with this device. Incompatible

recovered as materials and energy. Recycle packaging and user guides at your local

recycling scheme. When you cooperate and deliver all these materials to one of the

available collection sites, you contribute in helping the environment and help to

ensure the health of future generations.

All electrical and electronic products and batteries may contain recyclable metals

and other potentially hazardous substances and must be taken to their respective

collection sites at the end of their working life. Under no circumstances should you

break open a battery or other related materials. Do not dispose of these products as

unsorted municipal waste, as this may cause contamination of the environment or

risks to human health. All HMD Global products are in compliance with the applicable

European RF Exposure Information

Your mobile device is a radio transmitter and receiver. It is designed not to exceed the

limits for exposure to radio waves recommended by international guidelines. These

guidelines were developed by the independent scientic organization ICNIRP and

include safety margins designed to assure the protection of all persons, regardless

of age and health. The guidelines use a unit of measurement known as the Specic

Absorption Rate, or SAR.

The SAR limit for mobile devices is 2.0 W/kg and the highest SAR value for this device

when tested at the ear is 0.321 W/kg*. As mobile devices oer a range of functions,

they can be used in other positions, such as on the body. In this case, the highest

Your handset is a radio transmitter and receiver. It is designed and manufactured

not to exceed the emission limits for exposure to radio frequency (RF) energy set by

the Federal Communications Commission of the U.S. Government. The guidelines

are based on standards that were developed by independent scientic organization

through periodic and thorough evaluation of scientic studies. The standards include

a substantial safety margin designed to assure the safety of all persons, regardless

of age and health. The exposure standard for wireless handsets employs a unit of

measurement known as the Specic Absorption Rate, or SAR. The SAR limit set by the

FCC is 1.6 W/kg. The tests are performed in positions and locations (e.g. at the ear

and worn on the body) as required by the FCC for each model. The highest SAR value

accessories should not contain metallic components in its assembly. The use of

accessories that do not satisfy these requirements may not comply with FCC RF

exposure requirements, and should be avoided. The FCC has granted an Equipment

Authorization for this model handset with all reported SAR levels evaluated as in

compliance with the FCC RF emission guidelines. SAR information on this model

handset is on le with the FCC and can be found under the Display Grant section

2AJOTTA-1044.

Additional information on Specic Absorption Rates (SAR) can be found on the FCC

website at www.fcc.gov/general/radio-frequency-safety-0.