HON HAI PRECISION IND J20H076 802.11abgn wireless module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2023042
Application ID	IHSKkG1RJY9to3AiXHu9zQ==
Document Description	User Manual.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	277.74kB (3471733 bits)
Date Submitted	2013-07-23 00:00:00
Date Available	2013-10-15 00:00:00
Creation Date	2013-05-31 17:31:46
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2013-07-16 17:58:57
Document Title	Microsoft Word - J20H076.01_Approval Sheet_Rev1.0_20130524.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

HON HAI PRECISION IND. CO., LTD.
No.2, 2nd Dong Huan Road, 10th
YouSong lndustrial District, Longhua
Town, Baoan, ShenZhen
1. Level 1 Environment‐related Substances should NEVER be used.
2. Purchase ink, paint, wire rods, and molding resins only from the business partners that
Sony approves as Green Partners.
3. Recycled Resin and Coated Wire should be procured from Green Partners
User Manual
802.11abgn wireless module
IEEE 802.11a/b/g/n 2x2 WiFi Module
Project Name
802.11abgn
wireless
module2x2 WiFi Module
QCA9375 IEEE
802.11a/b/g/n
Customer Part No.
Approval Sheet Rev.
Foxconn Part No.
021430401
1.0
J20H076.01
Prepared by
Reviewed by
Approved by
Gallon G.R. Tao
Robin Xu
Chang‐Fu Lin
CONTENTS
1.
REVISION HISTORY ..................................................................... 3
PRODUCT OVERVIEW ................................................................... 4
SIGNAL DESCRIPTION .................................................................. 5
3.1
SIGNAL DIAGRAM ........................................................................5
3.2
PINOUTS ...............................................................................5
3.2.1
Connector Specification .............................................................5
3.2.2
Pin definition ......................................................................5
ELECTRICAL SPECIFICATION............................................................ 6
4.1
ABSOLUTE MAXIMUM RATING ..............................................................6
4.2
RECOMMENDED OPERATING CONDITION .....................................................6
4.3
POWER CONSUMPTION ...................................................................6
4.4
POWER UP SEQUENCE ...................................................................6
4.5
WLAN RF SPECIFICATIONS ...............................................................7
4.5.1
WLAN RF Specification- 802.11b .....................................................7
4.5.2
WLAN RF Specification- 802.11g .....................................................8
4.5.3
WLAN RF Specification- 802.11n (2.4GHz) HT20 .......................................9
4.5.4
WLAN RF Specification- 802.11a ....................................................10
4.5.5
WLAN RF Specification- 802.11n (5GHz) HT20 .......................................11
4.5.6
WLAN RF Specification- 802.11n (5GHz) HT40 .......................................12
SCHEMATIC AND PCB LAYOUT ......................................................... 13
5.1
MODULE SCHEMATIC ....................................................................13
5.2
MODULE PCB LAYOUT ..................................................................15
5.2.1
PCB Stack-up ....................................................................15
5.2.2
Component Placement .............................................................15
5.2.3
PCB Layout ......................................................................16
ANTENNA SPECIFICATIONS ............................................................ 18
6.1
6.2
PCB PRINTED ANTENNA PATTERN .........................................................18
ANTENNA RADIATION PERFORMANCE .......................................................18
MODULE MECHANICAL SPECIFICATIONS ............................................... 21
HANDLING NOTICE .................................................................... 22
RELIABILITY TEST PLAN ............................................................... 23
10
MARKING INFORMATION ............................................................... 25
11
PACKING INFORMATION ............................................................... 26
1. Revision History
Date
2013/5/24
Document revision
1.0
Change History
Initial release
!
2 Product Overview
This documentation outlines the QCA9375 WiFi Module. It is 802.11a/b/g/n compatible, ARIB STD-T66
Compatible; the module Host I/F is USB 2.0.
IEEE 802.11 a/b/g and 802.11n payload data rates for Wireless Local Area Network (WLAN).
1.1 Operating Frequency: 2402~2483.5MHz, 5150MHz~5250MHz, 5250MHz~5350MHz,
5470MHz~5725MHz, 5725MHz~5845MHz
1.2 Modulation: DBPSK, DQPSK, CCK, BPSK, QPSK, 16QAM, 64QAM
1.3 Data Rates: 1/2/5.5/11Mbps (11b)
6/9/12/18/24/36/48/54 Mbps (11g)
MCS0~MCS15
1.4 Security: it supports WEP, TKIP, AES, WPA/WPA2 and WAPI
1.5 Full 802.11e QoS support including WMM.
1.6 Support Short Guard interval and Frame aggregation with A-MPDU
The module is designed with a WTB (Wire to Board) connector to connect to host. Dimension is 40.0mm
x37.5mm x 5.45mm (typical).
Below figure1 shows functional block diagram of the WLAN module.
Figure 1: Module Functional Block Diagram
5!
!
3 Signal Description
3.1 Signal Diagram
Below figure 2 shows its signal diagram.
Figure 2: Module Signal Diagram
3.2 Pinouts
3.2.1
Connector Specification
JST WTB connector, Part Number: SM10B-GHS-TB(LF)!
Pin1
3.2.2
Pin definition
Pin#
Pin Name
GND
WoW
CHIP_PWD_L
GND
Pin Type
USB_DM
I/O
10
USB_DP
VCC_3.3V
VCC_3.3V
GND
GND
I/O
Power
Power
Description
Ground
Wake-up on wireless LAN
Reset to module
Ground
USB differential signal negative
USB differential signal positive
3.3V power supply
3.3V power supply
Ground
Ground
6!
Remark
Active high
Active low
+/-5%
+/-5%
4 Electrical Specification
4.1 Absolute Maximum Rating
Symbol
Condition
Min.
Typ.
Max
Unit
VCC_3.3V
Respect to GND
-0.3
3.3
3.6
CHIP_PWD_L
Respect to GND
-0.3
3.3
3.6
Max Ripple on Supplied Voltage
3.3V
165
mVpp
Operating Temperature
--
-10
25
75
℃
Storage Temperature
--
-40
25
85
℃
Min.
Typ.
Max
4.2 Recommended Operating Condition
Symbol
Condition
Unit
VCC_3.3V
Respect to GND
3.14
3.3
3.46
CHIP_PWD_L
Respect to GND
-0.3
3.3
3.46
4.3 Power Consumption
Symbol
Condition
Min
Supply voltage
3.3V
Typ.
Max
3.0
3.3
Tx Current(1Mbps/16dBm,MIMO)
--
465
3.6
--
Tx Current(11g: 54Mbps/14.5dBm,MIMO)
Tx Current(11gn: MCS15/13dBm/HT20,MIMO)
Tx Current(11a: 6Mbps/15dBm,MIMO)
Tx Current(11a: 54Mbps/12dBm,MIMO)
Tx Current(11an: MCS15/10dBm/HT40,MIMO)
Rx Current: 2.4GHz
Rx Current: 5GHz
--------
400
380
630
490
425
120
130
--------
Unit
mA
mA
mA
mA
mA
mA
mA
mA
4.4 Power Up Sequence
Power up (reset) timing is shown as below:
When host processor controls the CHIP_PWD_L reset pin, then all power supplies should be
stable for minimum of 5μs before CHIP_PWD_L is de‐asserted.
Parameter
Description
Min
Max
Unit
tA
tC
Rise time of VDD3.3V go to 90% of 3.3V
Time from VDD3.3V reaching 90% of 3.3V to level of
CHIP_PWD_L going above 50% of VDD3.3V.
The value is tA+tC, during this time, the level of
CHIP_PWD_L should stay below 50% of VDD3.3V.
‐
25
‐
ms
μs
tB
4.5 WLAN RF Specifications
4.5.1
WLAN RF Specification- 802.11b
Items
Contents
Specification
Mode
Channel
Data rate
TX Characteristics
1. Power Levels (per chain)
1) Target Power@1Mbps
2) Target Power@2Mbps
3) Target Power@5.5Mbps
4) Target Power@11Mbps
2. Spectrum Mask @ Target Power
1) fc-33MHz ＜ f ＜ fc-22MHz
2) fc-22MHz ＜ f ＜ fc-11MHz
3) fc+11MHz ＜ f ＜ fc+22MHz
4) fc+22MHz ＜ f ＜ fc+33MHz
3. Frequency Error
4. Modulation Accuracy(EVM)@ Target Power
1) 1Mbps
2) 2Mbps
3) 5.5Mbps
Min.
IEEE 802.11b
DSSS / CCK
CH1 to CH13
1, 2, 5.5, 11Mbps
Typ.
Max.
Unit
14.5
14.5
14.5
14.5
16a
16
16
16a
17.5
17.5
17.5
17.5
dBm
dBm
dBm
dBm
-10
-50
-30
-30
-50
+10
dBr
dBr
dBr
dBr
ppm
-10
-10
-10
dB
dB
dB
-10
dB
-52
dBm
RX Characteristics
6. Minimum Input Level Sensitivity
1) 1Mbps (FER≦8%)
2) 2Mbps (FER≦8%)
3) 5.5Mbps (FER≦8%)
4) 11Mbps (FER≦8%)
Min.
Typ.
Max.
Unit
-97
-94
-90
-87
-92
-89
-85
-82
dBm
dBm
dBm
dBm
7. Maximum Input Level (FER≦8%)
-10
dBm
-65
dBm
4) 11Mbps
5. Tx spurious emission
8. Rx spurious emission
a: 2412MHz target power reduced to 15dBm for FCC bandedge limit.
4.5.2
WLAN RF Specification- 802.11g
Items
Contents
Specification
Mode
Channel
Data rate
TX Characteristics
1. Power Levels (per chain)
1) Target Power@6Mbps
2) Target Power@9Mbps
3) Target Power@12Mbps
4) Target Power@18Mbps
5) Target Power@24Mbps
6) Target Power@36Mbps
7) Target Power@48Mbps
8) Target Power@54Mbps
2. Spectrum Mask @ Target Power
1) at fc +/- 11MHz
2) at fc +/- 20MHz
3) at fc > +/-30MHz
3. Modulation Accuracy(EVM)@ Target Power
1) 6Mbps
2) 9Mbps
3) 12Mbps
4) 18Mbps
5) 24Mbps
6) 36Mbps
7) 48Mbps
8) 54Mbps
Min.
IEEE 802.11g
OFDM
CH1 to CH13
6, 9, 12, 18, 24, 36, 48, 54Mbps
Typ.
Max.
14.5
14.5
14.5
14.5
14.5
13.5
13.5
12.5
16b
16
16b
16b
16
Unit
15b
15
14b
17.5
17.5
17.5
17.5
17.5
16.5
16.5
15.5
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
-20
-28
-40
dBr
dBr
dBr
-5
-8
-10
-13
-16
-19
-22
-25
dB
dB
dB
dB
dB
dB
dB
dB
-10
+10
ppm
-54
dBm
RX Characteristics
6. Minimum Input Level Sensitivity
1) 6Mbps (PER <10%)
2) 9Mbps (PER < 10%)
3) 12Mbps (PER < 10%)
4) 18Mbps (PER < 10%)
5) 24Mbps (PER < 10%)
6) 36Mbps (PER < 10%)
7) 48Mbps (PER < 10%)
8) 54Mbps (PER < 10%)
Min.
Typ.
Max.
Unit
-91
-89
-87
-84
-82
-80
-78
-76
-84
-83
-81
-79
-76
-73
-70
-69
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
7. Maximum Input Level (PER < 10%)
-20
dBm
-65
dBm
4. Frequency Error
5. Tx spurious emission
8. Rx spurious emission
b: 2412MHz target power reduced to 11dBm, 2462MHz target power reduced to 12.5dBm for FCC bandedge limit.
4.5.3
WLAN RF Specification- 802.11n (2.4GHz) HT20
Items
Contents
Specification
Mode
Channel
Data rate (MCS index)
TX Characteristics
1. Power Levels (per chain)
1) Target Power@MCS0
2) Target Power@ MCS1
3) Target Power@ MCS2
4) Target Power@ MCS3
5) Target Power@ MCS4
6) Target Power@ MCS5
7) Target Power@ MCS6
8) Target Power@ MCS7
2. Spectrum Mask @Target Power
1) at fc +/- 11MHz
2) at fc +/- 20MHz
3) at fc > +/-30MHz
3. Modulation Accuracy(EVM)@Target Power
1) MCS0
2) MCS1
3) MCS2
4) MCS3
5) MCS4
6) MCS5
7) MCS6
8) MCS7
Min.
IEEE 802.11n HT20
OFDM
CH1 to CH13
MCS0/1/2/3/4/5/6/7
Typ.
Max.
Unit
13.5
13.5
13.5
13.5
13.5
12.5
12.5
11.5
15c
15
15
15
15
14c
14c
13c
16.5
16.5
16.5
16.5
16.5
15.5
15.5
14.5
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
-20
-28
-45
dBr
dBr
dBr
-5
-10
-13
-16
-19
-22
-25
-27
dB
dB
dB
dB
dB
dB
dB
dB
-10
+10
ppm
-54
dBm
RX Characteristics
6. Minimum Input Level Sensitivity
1) MCS0 (PER < 10%)
2) MCS1 (PER < 10%)
3) MCS2 (PER < 10%)
4) MCS3 (PER < 10%)
5) MCS4 (PER < 10%)
6) MCS5 (PER < 10%)
7) MCS6 (PER < 10%)
8) MCS7 (PER < 10%)
Min.
Typ.
Max.
Unit
-89
-87
-85
-82
-79
-77
-75
-73
-83
-81
-79
-76
-73
-69
-67
-66
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
7. Maximum Input Level (PER < 10%)
-20
dBm
-65
dBm
4. Frequency Error
5. Tx spurious emission
8. Rx spurious emission
c: 2412MHz target power reduced to 10dBm, 2462MHz target power reduced to 11.5dBm for FCC bandedge limit.
4.5.4
WLAN RF Specification- 802.11a
Items
Contents
Specification
Mode
IEEE 802.11a
OFDM
5150MHz~5250MHz, 5250MHz~5350MHz,
5470MHz~5725MHz, 5725MHz~5845MHz
6, 9, 12, 18, 24, 36, 48, 54Mbps
Min.
Typ.
Max.
Unit
Channel
Data rate
TX Characteristics
1. Power Levels (per chain)
1) Target Power@6Mbps
2) Target Power@9Mbps
3) Target Power@12Mbps
4) Target Power@18Mbps
5) Target Power@24Mbps
6) Target Power@36Mbps
7) Target Power@48Mbps
8) Target Power@54Mbps
2. Spectrum Mask @ Target Power
1) at fc +/- 11MHz
2) at fc +/- 20MHz
3) at fc > +/-30MHz
3. Modulation Accuracy(EVM)@ Target Power
1) 6Mbps
2) 9Mbps
3) 12Mbps
4) 18Mbps
5) 24Mbps
6) 36Mbps
7) 48Mbps
8) 54Mbps
13
13
13
13
13
12
11
10
14.5d,e,f
d,e,f
14.5
14.5d,e,f
14.5d,e,f
d,e,f
14.5
13.5d
12.5d
11.5
16
16
16
16
16
15
14
13
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
-20
-28
-40
dBr
dBr
dBr
-5
-8
-10
-13
-16
-19
-22
-25
dB
dB
dB
dB
dB
dB
dB
dB
-10
+10
ppm
-52
dBm
RX Characteristics
6. Minimum Input Level Sensitivity
1) 6Mbps (PER <10%)
2) 9Mbps (PER < 10%)
3) 12Mbps (PER < 10%)
4) 18Mbps (PER < 10%)
5) 24Mbps (PER < 10%)
6) 36Mbps (PER < 10%)
7) 48Mbps (PER < 10%)
8) 54Mbps (PER < 10%)
Min.
Typ.
Max.
Unit
-90
-89
-87
-85
-82
-79
-75
-74
-84
-83
-81
-79
-76
-73
-70
-69
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
7. Maximum Input Level (PER < 10%)
-30
dBm
-58
dBm
4. Frequency Error
5. Tx spurious emission
8. Rx spurious emission
d: 5180MHz~5240MHz, 6Mbps~48Mbps target power reduced to 12dBm for FCC power density limit.
e: 5700MHz, 6Mbps~24Mbps target power reduced to 13.5dBm for FCC bandedge limit.
f: 5180MHz, 6Mbps~24Mbps target power reduced to 12.5dBm for TELEC adjacent channel power limit
5200MHz~5320MHz, 6Mbps~24Mbps target power reduced to 14dBm for TELEC adjacent channel power limit.
10
4.5.5
WLAN RF Specification- 802.11n (5GHz) HT20
Items
Contents
Specification
Mode
IEEE 802.11a/n HT20
OFDM
5150MHz~5250MHz, 5250MHz~5350MHz,
5470MHz~5725MHz, 5725MHz~5845MHz
MCS0/1/2/3/4/5/6/7
Min.
Typ.
Max.
Unit
Channel
Data rate (MCS index)
TX Characteristics
1. Power Levels (per chain)
1) Target Power@MCS0
2) Target Power@ MCS1
3) Target Power@ MCS2
4) Target Power@ MCS3
5) Target Power@ MCS4
6) Target Power@ MCS5
7) Target Power@ MCS6
8) Target Power@ MCS7
2. Spectrum Mask @ Target Power
1) at fc +/- 11MHz
2) at fc +/- 20MHz
3) at fc > +/-30MHz
3. Modulation Accuracy(EVM)@ Target Power
1) MCS0
2) MCS1
3) MCS2
4) MCS3
5) MCS4
6) MCS5
7) MCS6
8) MCS7
4. Frequency Error
5. Tx spurious emission
RX Characteristics
6. Minimum Input Level Sensitivity
1) MCS0 (PER < 10%)
2) MCS1 (PER < 10%)
3) MCS2 (PER < 10%)
4) MCS3 (PER < 10%)
5) MCS4 (PER < 10%)
6) MCS5 (PER < 10%)
7) MCS6 (PER < 10%)
8) MCS7 (PER < 10%)
7. Maximum Input Level (PER < 10%)
8. Rx spurious emission
12
12
12
12
12
11
10
13.5g,h,i
g,h,i
13.5
g,h,i
13.5
g,h,i
13.5
g,h,i
13.5
12.5 g,i
11.5
10.5
15
15
15
15
15
14
13
12
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
-20
-28
-45
dBr
dBr
dBr
-10
-5
-10
-13
-16
-19
-22
-25
-27
+10
dB
dB
dB
dB
dB
dB
dB
dB
ppm
Min.
Typ.
-54
Max.
dBm
Unit
-88
-86
-84
-80
-77
-74
-72
-71
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
-30
-83
-81
-79
-76
-73
-69
-67
-66
dBm
-58
dBm
g: 5180MHz~5240MHz, MCS0~MCS5 target power reduced to 12dBm for FCC power density limit.
h: 5700MHz, MCS0~MCS4 target power reduced to 12.5dBm for FCC bandedge limit.
i: 5180MHz, MCS0~MCS5 target power reduced to 12.5dBm for TELEC adjacent channel power limit
11
4.5.6
WLAN RF Specification- 802.11n (5GHz) HT40
Items
Contents
Specification
Mode
IEEE 802.11a/n HT40
OFDM
5150MHz~5250MHz, 5250MHz~5350MHz,
5470MHz~5725MHz, 5725MHz~5845MHz
MCS0/1/2/3/4/5/6/7
Min.
Typ.
Max.
Unit
Channel
Data rate (MCS index)
TX Characteristics
1. Power Levels (per chain)
1) Target Power@MCS0
2) Target Power@ MCS1
3) Target Power@ MCS2
4) Target Power@ MCS3
5) Target Power@ MCS4
6) Target Power@ MCS5
7) Target Power@ MCS6
8) Target Power@ MCS7
2. Spectrum Mask @Target Power
1) at fc +/- 11MHz
2) at fc +/- 20MHz
3) at fc > +/-30MHz
3. Modulation Accuracy(EVM)@Target Power
1) MCS0
2) MCS1
3) MCS2
4) MCS3
5) MCS4
6) MCS5
7) MCS6
8) MCS7
4. Frequency Error
11
11
11
11
11
10
12.5j,k
j,k
12.5
j,k
12.5
j,k
12.5
j,k
12.5
11.5j,k
10.5j
9.5
14
14
14
14
14
13
12
11
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
-20
-28
-45
dBr
dBr
dBr
-10
-5
-10
-13
-16
-19
-22
-25
-28
+10
dB
dB
dB
dB
dB
dB
dB
dB
ppm
5. Tx spurious emission
RX Characteristics
6. Minimum Input Level Sensitivity
1) MCS0 (PER < 10%)
2) MCS1 (PER < 10%)
3) MCS2 (PER < 10%)
4) MCS3 (PER < 10%)
5) MCS4 (PER < 10%)
6) MCS5 (PER < 10%)
7) MCS6 (PER < 10%)
8) MCS7 (PER < 10%)
Min.
Typ.
-52
Max.
dBm
Unit
-85
-82
-79
-76
-73
-71
-69
-68
-80
-78
-76
-73
-70
-66
-64
-63
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
7. Maximum Input Level (PER < 10%)
-30
dBm
-58
dBm
8. Rx spurious emission
j: 5180MHz, MCS0~MCS6 target power reduced to 10dBm for FCC bandedge limit;
5320MHz, MCS0~MCS6 target power reduced to 9.5dBm for FCC bandedge limit
k: 5510MHz, MCS0~MCS5 target power reduced to 10.5dBm for FCC bandedge limit.
12
6 Antenna Specifications
6.1 PCB Printed Antenna Pattern
Ant 0 and Ant 1 pattern are horizontal mirror
Ant 0
Ant 1
6.2 Antenna Radiation Performance
Antenna VSWR and Isolation
Antenna Peak gain and Efficiency
18
Antenna 0 2.4GHz radiation pattern
Antenna 0 5GHz radiation pattern
19
Antenna 1 2.4GHz radiation pattern
Antenna 1 5GHz radiation pattern
20
7 Module Mechanical Specifications
Dimension (W x L x H ):
40.0mmx37.5mmx5.45mm
21
8 Handling Notice
ESD
There are semiconductors on the module, please handle the module under ESD protected and
well-controlled environment (<100V).
Storage and Usage Condition
1. Moisture barrier bag must be stored under 40 ℃, humidity under 90% RH, when the moisture barrier
bag is sealed by Foxconn.
2. The calculated shelf life for the dry packed product shall be a 12 months from the bag seal date.
3. If Moisture barrier bag is open, the component must be stored in an environment of <25±5℃
/10%RH
4. Please keep the module at 30℃/70% RH.
22
9 Reliability Test Plan
23
24
10Marking Information
Please refer to below for the laser marking details.
1: 2D barcode, content is total 37 digits, include MAC ID, Customer data, and SONY Part Number
2: MAC address
3: Foxconn model name – Label version
4: Foxconn manufacture order
5: SONY Part Number
6: Serial number + Customer data
25
11 Packing Information
26
27
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the
antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or
antenna.
As long as 2 conditions above are met, further transmitter test will not be required.
However, the OEM integrator is still responsible for testing their end-product for any
additional compliance requirements required with this module installed
IMPORTANT NOTE: In the event that these conditions can not be met (for example
certain laptop configurations or co-location with another transmitter), then the FCC
authorization is no longer considered valid and the FCC ID can not be used on the
final product. In these circumstances, the OEM integrator will be responsible for
re-evaluating the end product (including the transmitter) and obtaining a separate FCC
authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be
installed such that 20 cm may be maintained between the antenna and users. The final
end product must be labeled in a visible area with the following: “Contains FCC ID:
MCLJ20H076”. The grantee's FCC ID can be used only when all FCC compliance
requirements are met.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding
how to install or remove this RF module in the user’s manual of the end product which
integrates this module.
The end user manual shall include all required regulatory information/warning as show in
this manual.
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio
exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit
pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris
un brouillage susceptible de provoquer un fonctionnement indésirable.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your
body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de
distance entre la source de rayonnement et votre corps.
This device is intended only for OEM integrators under the following conditions: (For module device use)
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or antenna.
As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM
integrator is still responsible for testing their end-product for any additional compliance requirements
required with this module installed.
Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes:
(Pour utilisation de dispositif module)
1) L'antenne doit être installée de telle sorte qu'une distance de 20 cm est respectée entre l'antenne et
les utilisateurs, et
2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne.
Tant que les 2 conditions ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront
pas nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final
pour toutes exigences de conformité supplémentaires requis pour ce module installé.
IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or co-location
with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can
not be used on the final product. In these circumstances, the OEM integrator will be responsible for
re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization.
NOTE IMPORTANTE:
Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations
d'ordinateur portable ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada
n'est plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces
circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et
l'obtention d'une autorisation distincte au Canada.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed such that
20 cm may be maintained between the antenna and users. The final end product must be labeled in a
visible area with the following: “Contains IC: 2878D-J20H076”.
Plaque signalétique du produit final
Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où l'antenne peut
être installée de telle sorte qu'une distance de 20cm peut être maintenue entre l'antenne et les
utilisateurs. Le produit final doit être étiqueté dans un endroit visible avec l'inscription suivante: "Contient
des IC: 2878D-J20H076".
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install or
remove this RF module in the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.
Manuel d'information à l'utilisateur final
L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la
façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre
ce module.
Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et
avertissements comme indiqué dans ce manuel.
Caution :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz
shall comply with the e.i.r.p. limit; and
(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the
e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.
(iv) Users should also be advised that high-power radars are allocated as primary users (i.e. priority
users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference
and/or damage to LE-LAN devices.
Avertissement:
Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les
restrictions susmentionnées, notamment :
(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une
utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites
mobiles utilisant les mêmes canaux;
(ii) le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et 5 470-5
725 MHz doit se conformer à la limite de p.i.r.e.;
(iii) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se
conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas.
(iv) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance
sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5
650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs
LAN-EL.
For Taiwan:低功率電波輻射性電機管理辦法
第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大
功率或變更原設計之特性及功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，
並改善至無干擾時方得繼續使用。
前項合法通信，指依電信法規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。
1. 本模組於取得認證後將依規定於模組本體標示審驗合格標籤。
2. 系統廠商應於平台上標示「本產品內含射頻模組：
XXXyyyLPDzzzz-x」字樣。

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Format                          : application/pdf
Title                           : Microsoft Word - J20H076.01_Approval Sheet_Rev1.0_20130524.doc
Creator                         : Administrator
Create Date                     : 2013:05:31 17:31:46+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2013:07:16 17:58:57+08:00
Metadata Date                   : 2013:07:16 17:58:57+08:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:7549fdf3-19c6-4d96-98ed-10b495501861
Instance ID                     : uuid:17d62171-5d8c-4c7a-a88e-74cfa40cbae3
Has XFA                         : No
Page Count                      : 28
Author                          : Administrator

EXIF Metadata provided by EXIF.tools