HON HAI PRECISION IND J20H090 WLAN module User Manual J20H090
HON HAI Precision Ind. Co., Ltd. WLAN module J20H090
User Manual.pdf
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2688320 |
| Application ID | 96H3L2I/FMM74cCudsExwQ== |
| Document Description | User Manual.pdf |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 25.66kB (320812 bits) |
| Date Submitted | 2015-07-22 00:00:00 |
| Date Available | 2016-01-18 00:00:00 |
| Creation Date | 2015-07-16 19:33:53 |
| Producing Software | Acrobat Distiller 8.1.0 (Windows) |
| Document Lastmod | 2015-07-17 13:58:26 |
| Document Title | Microsoft Word - J20H090 user manual |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | eku |
Ambit Microsystems (Shanghai) LTD. No 1925, Nanle Road Songjiang Export Processing Zone Shanghai, China Tel :86-21-61206688 Ext:22165 FAX:86-21-57749230 User Manual of J20H090 Project Name Approval Sheet Rev. Foxconn Part No. Prepared by Clon Liu WLAN module 1.0 J20H090 Reviewed by Eddie Huang Approved by Choro Chuang CONTENTS REVISION HISTORY ..................................................................... 3 MANUFACTURING INFORMATION ........................................................ 4 PRODUCT OVERVIEW ................................................................... 5 3.1 MODULE HARDWARE OVERVIEW ........................................................ 6 4.1 4.2 4.3 ABSOLUTE MAXIMUM RATING ............................................................. 8 RECOMMENDED OPERATING RATING ....................................................... 8 DC CHARACTERISTICS .................................................................. 8 ESD INFORMATION ..................................................................... 8 ENVIRONMENT STORAGE CONDITION ....................................................... 8 RF SPECIFICATION ..................................................................... 9 6.1 6.2 6.3 6.4 BLOCK DIAGRAM ....................................................................... 6 FEATURES ............................................................................ 6 INTERFACE AND CONNECTOR ............................................................. 6 ELECTRICAL SPECIFICATION ............................................................ 8 5.1 5.2 5.3 5.4 5.5 APPLICATION SCOPE .................................................................... 5 IEEE802.11B ......................................................................... 9 IEEE802.11G ........................................................................ 10 802.11N HT20 ....................................................................... 11 ANTENNA ELECTRICAL SPECIFICATION..................................................... 11 MECHANICAL SPECIFICATIONS......................................................... 12 7.1 7.2 7.3 SHIELDING COVER DIMENSION ........................................................... 12 PCB ASSEMBLY DIMENSION ............................................................. 13 MOUNT POSITION OF MATERIALS ......................................................... 13 1 Revision History Date Document revision 2015/06/30 1.0 Change Description Initial release 2 Manufacturing Information Manufacture Country: Made in China Manufacturer: Ambit Microsystems (Shanghai) LTD. Manufacture Address: No 1925, Nanle Road Songjiang Export Processing Zone Shanghai, China 3 Product Overview The J20H090 802.11 b/g/n module provides wireless modem functionality utilizing direct sequence spread spectrum and OFDM/CCK technology. This module is based on MTK MT7601U solution .It fully complies with IEEE 802.11n and IEEE 802.11 b/g standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance. Optimized RF architecture and baseband algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient DMA engine and hardware data processing accelerators which offloads the host processor. 3.1 Application scope The wireless LAN is compliant to IEEE 802.11b and IEEE 802.11g and IEEE 802.11n standard. The data rate of 802.11b is up to 11Mbps and fallback rates of 5.5, 2, 1Mbps. The data rate of 802.11g is up to 54Mbps and fallback rates of 48,36,24,18,12,9, 6Mbps. The data rate of 802.11n HT20 is up to 65Mbps and fallback rates of 58.5, 52, 39, 26, 19.5, 13, 6.5Mbps; 4 Module Hardware Overview 4.1 Block Diagram The general HW architecture is shown below Figure: Module Block Diagram 4.2 Features ♦ ♦ ♦ ♦ ♦ IEEE802.11b/g/n (1X1) based on MTK MT7601U solution. USB 2.0 Interface, High and Full Speeds supported. Module is powered by the host with a 5.0V +/- 5% supply. External PCB printed antennas. 2 layers through hole PCB design with halogen free FR4 material 4.3 Interface and Connector ♦ Pin definition: ♦ Vendor: Kyocera Elco ♦ Vendor P/N: 046232105102800+ Pin Number Symbol Name GND DP DM Status I/O I/O Pin definition Ground USB positive data USB negative data 4 WoW UV+ Wake on WLAN USB +5V power input 5 Electrical Specification 5.1 Absolute maximum rating Element DC supply voltage 5.2 UV+ Symbol UV+ Min 4.5 Parameter Supply voltage Tx Current(1M/15dBm) Tx Current(11M/15dBm) Tx Current(6M/15dBm) Tx Current(54M/15dBm) Tx Current(MCS0/15Bm/HT20) Tx Current(MCS7/15dBm/HT20) Rx Current Max 6.5 Unit (V) Typ 5.0 Max 5.5 Unit (V) Min 4.5 Typ. 5.0 Max 5.5 110 140 170 120 60 10 150 90 30 180 120 50 ESD Information Mode HBM 5.5 Typ 5.0 DC Characteristics Symbol 5.4 Min Recommended operating rating Element DC supply voltage 5.3 Symbol UV+ Level +/-1000 Unit Environment Storage Condition Environment condition Temperature Humidity Operating Temperature: -10 deg.C ~70 deg.C Storage Temperature: -40 deg.C ~85 deg.C Operating Humidity: 20% ~90% Storage Humidity: 20% ~90% Unit (V) (mA) (mA) (mA) (mA) (mA) (mA) (mA) 6 RF Specification 6.1 IEEE802.11b Items Contents Specification Mode Channel Data rate TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@1Mbps 2) Target Power@2Mbps 3) Target Power@5.5Mbps 4) Target Power@11Mbps 2. Spectrum Mask @15dBm 1) fc-33MHz ＜ f ＜ fc-22MHz 2) fc-22MHz ＜ f ＜ fc-11MHz 3) fc+11MHz ＜ f ＜ fc+22MHz 4) fc+22MHz ＜ f ＜ fc+33MHz 3. Frequency Error 4 Modulation Accuracy(EVM)@15dBm 1) 1Mbps 2) 2Mbps 3) 5.5Mbps 4) 11Mbps RX Characteristics 5 Minimum Input Level Sensitivity 1) 1Mbps (FER≦8%) 2) 2Mbps (FER≦8%) 3) 5.5Mbps (FER≦8%) 4) 11Mbps (FER≦8%) 6 Maximum Input Level (FER≦8%) Min. IEEE802.11b DSSS / CCK CH1 to CH13 1, 2, 5.5, 11Mbps Typ. Max. Unit 26 26 26 26 26 26 26 26 26 26 26 26 dBm dBm dBm dBm -10 -50 -30 -30 -50 +10 dBr dBr dBr dBr ppm Min. Typ. -10 -10 -10 -10 Max. dB dB dB dB Unit -10 -91 -89 -87 -85 -5 dBm dBm dBm dBm dBm 6.2 IEEE802.11g Items Contents Specification Mode Channel Data rate TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@6Mbps 2) Target Power@9Mbps 3) Target Power@12Mbps 4) Target Power@18Mbps 5) Target Power@24Mbps 6) Target Power@36Mbps 7) Target Power@48Mbps 8) Target Power@54Mbps 2. Spectrum Mask @15dBm 1) at fc +/- 11MHz 2) at fc +/- 20MHz 3) at fc > +/-30MHz 3 Modulation Accuracy(EVM)@15dBm 1) 6Mbps 2) 9Mbps 3) 12Mbps 4) 18Mbps 5) 24Mbps 6) 36Mbps 7) 48Mbps 8) 54Mbps 4 Frequency Error RX Characteristics 5 Minimum Input Level Sensitivity 1) 6Mbps (PER <10%) 2) 9Mbps (PER < 10%) 3) 12Mbps (PER < 10%) 4) 18Mbps (PER < 10%) 5) 24Mbps (PER < 10%) 6) 36Mbps (PER < 10%) 7) 48Mbps (PER < 10%) 8) 54Mbps (PER < 10%) 6 Maximum Input Level (PER < 10%) Min. 10 IEEE802.11g OFDM CH1 to CH13 6, 9, 12, 18, 24, 36, 48, 54Mbps Typ. Max. Unit 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 dBm dBm dBm dBm dBm dBm dBm dBm -20 -28 -40 dBr dBr dBr -10 Min. -28 Typ. -5 -8 -10 -13 -16 -19 -22 -25 +10 Max. dB dB dB dB dB dB dB dB ppm Unit -20 -83 -81 -79 -77 -75 -73 -71 -69 -11 dBm dBm dBm dBm dBm dBm dBm dBm dBm 6.3 802.11n HT20 Items Contents Specification Mode Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) Target Power@MCS0 2) Target Power@ MCS1 3) Target Power@ MCS2 4) Target Power@ MCS3 5) Target Power@ MCS4 6) Target Power@ MCS5 7) Target Power@ MCS6 8) Target Power@ MCS7 2. Spectrum Mask @15dBm 1) at fc +/- 11MHz 2) at fc +/- 20MHz 3) at fc > +/-30MHz 3. Modulation Accuracy(EVM)@15dBm 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error RX Characteristics 5. Minimum Input Level Sensitivity 1) MCS0 (PER < 10%) 2) MCS1 (PER < 10%) 3) MCS2 (PER < 10%) 4) MCS3 (PER < 10%) 5) MCS4 (PER < 10%) 6) MCS5 (PER < 10%) 7) MCS6 (PER < 10%) 8) MCS7 (PER < 10%) 6. Maximum Input Level (PER < 10%) 6.4 Min. IEEE802.11n HT20 OFDM CH1 to CH10 MCS0/1/2/3/4/5/6/7 Typ. Max. 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 dBm dBm dBm dBm dBm dBm dBm dBm -20 -28 -45 dBr dBr dBr -10 Min. Typ. -5 -10 -13 -16 -19 -22 -25 -28 +10 Max. dB dB dB dB dB dB dB dB ppm Unit -20 -81 -79 -77 -75 -73 -71 -69 -67 -10 dBm dBm dBm dBm dBm dBm dBm dBm dBm Antenna Electrical Specification Parameter Operating frequency range Value Units 2.4 ~ 2.4835 GHz 2.98 dBi (Main) 3.15 dBi (Aux) Antenna gain (max) 11 Unit 7 Mechanical Specifications 7.1 Shielding Cover Dimension Dimension (LxWxH): 21.29mm x 18.66mm x 2.0mm Thickness: 0.2mm 12 7.2 PCB Assembly Dimension Dimension (W x Lx H ): 51.8mmx20mmx0.9mm PCB: 2 layer HF-FR4 design 7.3 Mount Position of Materials All materials should be populated on a side. Component Placement On Top Layer 13 Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1) L'antenne doit être installée de telle sorte qu'une distance de 20 cm est respectée entre l'antenne et les utilisateurs, et 2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront pas nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE: Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et l'obtention d'une autorisation distincte au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final 14 end product must be labeled in a visible area with the following: “Contains IC: 2878DJ20H064”. Plaque signalétique du produit final Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où l'antenne peut être installée de telle sorte qu'une distance de 20cm peut être maintenue entre l'antenne et les utilisateurs. Le produit final doit être étiqueté dans un endroit visible avec l'inscription suivante: "Contient des IC: 2878D- J20H090". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information à l'utilisateur final L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements comme indiqué dans ce manuel. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna 15 and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for reevaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID: MCLJ20H090”. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. For Taiwan 警語： (電信管制射頻器材使用) 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻 率、加大功率或變更原設計之特性及功能。 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立 即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線 電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之 干擾。 Note: 1. 本模組於取得認證後將依規定於模組本體標示審驗合格標籤 2. 系統廠商應於平 台上標示「本產品內含射頻模組: XXXyyyLPDzzzz-x (NCC ID) 」字樣 Europe – EU Declaration of Conformity This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: ‐ EN 60950‐1: 2006+A11:2009+A1:2010+A12:2011 Safety of Information Technology Equipment ‐ EN 62311: 2008 Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz‐300 GHz) (IEC 62311:2007 (Modified)) EN 300 328 V1.7.1: 2006 ‐ Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive EN 301 489‐1 V1.8.1: 2008 Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements 16 EN 301 489‐17 V2.1.1 2009 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment National Authorities were informed according to Article 6.4 of Frequency Notification. Special Requirements are considered. The product is labeled with CE Marking. 17
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Copy, Extract XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2015:07:17 13:58:26+08:00 Create Date : 2015:07:16 19:33:53+08:00 Metadata Date : 2015:07:17 13:58:26+08:00 Format : application/pdf Title : Microsoft Word - J20H090 user manual Creator : eku Producer : Acrobat Distiller 8.1.0 (Windows) Document ID : uuid:5ada47a5-8cc1-485e-bd40-99599adc1ba8 Instance ID : uuid:23c558b6-0409-4d28-be0f-5d6371fdcc88 Page Count : 17 Author : ekuEXIF Metadata provided by EXIF.tools