HON HAI PRECISION IND J27H020 O3 WiFi Module User Manual We

Download:
Mirror Download [FCC.gov]
Document ID	1255545
Application ID	Rb+Lmbd3S5Z95n41vZ7/1g==
Document Description	OEM installation guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.3kB (103800 bits)
Date Submitted	2010-03-23 00:00:00
Date Available	2010-03-23 00:00:00
Creation Date	2010-03-16 22:04:09
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2010-03-16 22:04:09
Document Title	We
Document Creator	Microsoft® Office Word 2007
Document Author:	Lee Turner

HON HAI PRECISION IND. CO., LTD. HSINCHU SCIENCE PARK BRANCH OFFICE
O3 WIFI MODULE
J27H020
USER’S MANUAL
HON HAI PRECISION IND. CO., LTD. HSINCHU SCIENCE PARK BRANCH OFFICE
Contents
INTRODUCTION ................................................................................................................................................................... 3
1.1 WLAN FEATURES .......................................................................................................................................................... 3
1.2 FCC NOTICE .................................................................................................................................................................. 4
1.3 CANADA NOTICE ............................................................................................................................................................ 5
The information contained in this manual has been verified at the time of this manual printing. The manufacturer reserves
the right to make any changes and improvements in the product described in this manual at any time and without notice.
All registered trademarks are the property of their respective owners.
HON HAI PRECISION IND. CO., LTD. HSINCHU SCIENCE PARK BRANCH OFFICE
Introduction
O3 WIFI Module is compliance with IEEE802.11,IEEE 802.11b and IEEE 802.11g Standards.
1.1 WLAN Features
Operating Frequency
2400 ~ 2483.5 MHz ISM band
Modulation Schemes
802.11: DPSK, DBPSK
802.11g: OFDM, DQPSK, DBPSK and CCK
802.11b: DQPSK, DBPSK and CCK
Channel Numbers
IEEE 802.11 compliant:
1 ~ 13 channels for United States, Europe and Japan
IEEE 802.11b/g compliant:
1 ~ 11 channels for United States
1 ~ 13 channels for Europe, Japan
WLAN Data Rate
802.11g: Up to 54 Mbps with auto fallback to 48, 36, 24, 18, 12,
9 and 6 Mbps.
802.11b: Up to 11 Mbps with auto fallback to 5.5, 2 and 1Mbps.
802.11 legacy: Up to 1Mbps and 2Mbps
Media Access Protocol
CSMA/CA with ACK
Transmitter Output Power
Item
802.11 legacy
Transmit
power level
802.11g
Condition
Min
Typ.
Max
Unit
1Mbps
-1.5
dBm
2Mbps
-1.5
dBm
6Mbps
3.5
dBm
9Mbps
3.5
dBm
12Mbps
3.5
dBm
18Mbps
3.5
dBm
24Mbps
3.5
dBm
36Mbps
2.5
dBm
48Mbps
2.5
dBm
HON HAI PRECISION IND. CO., LTD. HSINCHU SCIENCE PARK BRANCH OFFICE
802..11b
54Mbps
3.5
4.5
dBm
1Mbps
5.5
6.5
dBm
2Mbps
5.5
6.5
dBm
5.5Mbps
5.5
6.5
dBm
11Mbps
5.5
6.5
dBm
Antenna Type
Single antenna connector for off board antenna;
Operating Voltage
1.8 VDC and 3.3 VDC
Operating Systems
Windows 98/Me/2000/XP
1.2 FCC Notice
Federal Communication Commission Interference Statement :
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FOXCONN declared that J27H020 802.11b/g module is limited in CH1~11 from 2412 to 2462 MHz by
specified firmware controlled in USA.
This device is intended only for OEM integrators under the following conditions:
The antenna must be installed such that 20 cm is maintained between the antenna and users, and
The transmitter module may not be co-located with any other transmitter or antenna.
As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM
integrator is still responsible for testing their end-product for any additional compliance requirements
required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.).
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid
HON HAI PRECISION IND. CO., LTD. HSINCHU SCIENCE PARK BRANCH OFFICE
and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be
responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC
authorization.
End Product Labelling
This transmitter module is authorized only for use in device where the antenna may be installed such that
20 cm may be maintained between the antenna and users. The final end product must be labelled in a
visible area with the following: “Contains FCC ID: MCL J27H020.
Manual Information That Must be Included
The OEM integrator has to be aware not to provide information to the end user regarding how to install or
remove this RF module in the user’s manual of the end product which integrate this module.
The users manual for OEM integrators must include the following information in a prominent location
“IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter.
1.3 Canada Notice
Industry Canada Statement:
Operation is subject to the following two conditions:
1) This device may not cause interference.
2) This device must accept any interference, including interference that may cause undesired operation of the
device.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away
from windows to provide maximum shielding.
Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 5
Language                        : ja-JP
Tagged PDF                      : Yes
Title                           : We
Author                          : Lee Turner
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2010:03:16 22:04:09
Modify Date                     : 2010:03:16 22:04:09
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools