HON HAI PRECISION IND T77H114 Bluetooth Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1172706
Application ID	9qeyqIV6I8v6v+OaT/tkHg==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.05kB (175568 bits)
Date Submitted	2009-09-21 00:00:00
Date Available	2009-10-11 00:00:00
Creation Date	2009-09-21 17:31:06
Producing Software	AFPL Ghostscript 8.54
Document Lastmod	2009-09-21 17:36:29
Document Title	User Manual
Document Creator	PDFCreator Version 0.9.2
Document Author:	eden

COMPANY CONFIDENTIAL
HON HAI PRECISION IND. CO., LTD.
5F-1, 5 Hsin -An Rd.
Ambit Microsystems(Shanghai) LTD.
TEL: 86-21-6120-6688
Fax: 86-21-5774-9230
+886-3-577-5100
User Manual
Bluetooth Module
Part Name
Bluetooth Module
Doc. Rev.
Foxconn P/N.
0.0
T77H114
Prepared by
Reviewed by
Allen Li
Ya-nan Cui
Approved by
COMPANY CONFIDENTIAL
Content
1. Introduction..............................................................................................................3
1.1 Major Components ........................................................................................3
1.2 Features...........................................................................................................3
1.3 Application......................................................................................................3
2. Product Specification...............................................................................................4
2.1 Chipset ............................................................................................................4
2.2 Interfaces ........................................................................................................4
2.3 Hardware Design Considerations.................................................................4
2.3.1 Power....................................................................................................4
2.3.2 Clock Sources ......................................................................................4
2.3.3 Serial Flash and Firmware Version...................................................4
2.3.4 Radio Characteristics .........................................................................4
3. Pin Assignment .........................................................................................................5
4. 2D Dimension ...........................................................................................................6
4.1 Module ............................................................................................................6
4.2 10pin Board-to-Board Connector (Header) ................................................6
5.3 RF connector ..................................................................................................7
5.3.1 Specification.........................................................................................7
5.3.2 Dimensions...........................................................................................7
COMPANY CONFIDENTIAL
1. Introduction
Project Name: Bluetooth Module
Project Number: T77H114
This document provides information for designing and using the Broadcom Bluetooth
module with BCM2070 solution. It is a confidential document of Foxconn.
The Broadcom BCM2070 Bluetooth module is compatible with Bluetooth Core
Specification, Version 2.1, available in the 2.4GHz (ISM) band, and support Enhanced
Data Rate (EDR) and Adaptive Frequency Hopping (AFH) schemes. The chipset is a
single-chip Bluetooth transceiver and baseband processor, with highest level of
integration and eliminating most of critical external components, and thus minimizing
the module size and its cost.
1.1 Major Components
Broadcom BCM2070 (50 pin BGA, single-chip Bluetooth transceiver and
base-band processor)
Serial Flash Memory
1.2 Features
Bluetooth 2.1 compliant
Point-to-multipoint operation
External USB interface for data
Coexistence support
1.3 Application
Laptop and desktop computers
Handheld devices
Embedded systems
COMPANY CONFIDENTIAL
2. Product Specification
2.1 Chipset
50 pin BGA BCM2070PB0KWFBG
2.2 Interfaces
Bluetooth RF interface
Zo = 50 ohm
USB compliant 2.0 Interface
Multi-Function GPIO Interface
2.3 Hardware Design Considerations
2.3.1 Power
The module requires either a 3.3V or 5V supply voltage. There are 2 integrated
on-chip LDOs; VREG and VREGHV. The BCM2070 I/O port is 3.3V tolerant. The
core and RF run at VREG (1.2V). VDDTF is tied to VREGHV which can be
programmed to operate as either a class 1 or a class 2 device.
2.3.2 Clock Sources
A high-accuracy crystal with ±10ppm tolerance is connected to the BCM2070 clock
input pins.
2.3.3 Serial Flash and Firmware Version
Firmware is stored on an onboard serial flash module.
2.3.4 Radio Characteristics
Bluetooth v2.1 + EDR
Frequency Band: 2402 - 2480 GHz
Number of Channels:
79 1MHz channels
COMPANY CONFIDENTIAL
3. Pin Assignment
Connector: 10pin Matsushita AXK6F10347YG
Pin
Pin Name
I/O
Description
GND
GND
GND
BT_PRI
Output
INTEL_CH_CLK
Pairing
In/Out
GPIO_ANY_USE
Open
Not Used
NC
GND
GND
GND
LED
Output
BT_LED
USB D+
In/Out
USB D+
USB D-
In/Out
USB D-
WLAN_ACT
Input
INTEL_CH_DATA
10
3.3V Power
Power
Vcc
10-pin Connector Description
Output indicates that the signal is driven by Bluetooth device and transmitted to other
devices.
Input indicates that the signal is driven by other devices and transmitted to Bluetooth
device.
COMPANY CONFIDENTIAL
4. 2D Dimension
4.1 Module
4.2 10pin Board-to-Board Connector (Header)
Manufacturer: MATSUSHITA
Manufacturer P/N: AXK6F10347YG
Dimensions: (Unit: mm)
For AXK6F10347YG, A=5.50 mm, B=2.00 mm, C=1.25 mm.
COMPANY CONFIDENTIAL
5.3 RF connector
Manufacturer: Hirose /Foxconn
Manufacturer P/N: U.FL-R-SMT (10) /(HD96017)
5.3.1 Specification
Operating temperature range: 0℃~70℃
Storage temperature range: 0℃~70℃
Characteristic impedance: 50Ω (0~3GHz)
Voltage standing wave ratio: VSWR<=1.3 (0.045~3GHz)
5.3.2 Dimensions
COMPANY CONFIDENTIAL
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
will not occur in a particular installation.
However, there is no guarantee that interference
If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device is intended only for OEM integrators under the following conditions:
The transmitter module may not be co-located with any other transmitter or antenna,
As long as the condition above is met, further transmitter test will not be required. However, the OEM
integrator is still responsible for testing their end-product for any additional compliance requirements
required with this module installed (for example, digital device emissions, PC peripheral requirements,
etc.).
IMPORTANT NOTE: In the event that the condition can not be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no longer
considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM
integrator will be responsible for re-evaluating the end product (including the transmitter) and
obtaining a separate FCC authorization.
End Product Labeling
The final end product must be labeled in a visible area with the following: “Contains FCC ID:
MCLT77H114”.
COMPANY CONFIDENTIAL
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install
or remove this RF module in the user's manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.
Industry Canada Statement
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following
two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause undesired operation
of the device
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF
exposure compliance. To maintain compliance with IC RF exposure compliance requirements,
please follow operation instruction as documented in this manual.
This device is intended only for OEM integrators
under the following conditions:
The transmitter module may not be co-located with any other transmitter or antenna.
As long as conduction above is met, further transmitter test will not be required. However, the OEM
integrator is still responsible for testing their end-product for any additional compliance requirements
required with this module installed (for example, digital device emissions, PC peripheral requirements,
etc.).
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the IC authorization is no longer
considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM
COMPANY CONFIDENTIAL
integrator will be responsible for re-evaluating the end product (including the transmitter) and
obtaining a separate IC authorization.
End Product Labeling
The final end product must be labeled in a visible area with the following: “Contains TX IC :
2878D-T77H114”.
Manual Information That Must be Included
The OEM integrator has to be aware not to provide information to the end user regarding how to install
or remove.
This RF module in the user's manual of the end product which integrates this module.
The user's manual for OEM Integrators must include the following information in a prominent location
“IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements. The antenna must
not be co-located or operating in conjunction with any other antenna or transmitter”.
NCC 警語 :
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變
更原設計之特性及功能。
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至
無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法
通信或工業、科學及醫療用電波輻射性電機設備之干擾。
本模組於取得認證後將依規定於模組本體標示審合格籤，並要求平台上標示「本產品內含射頻模組：ID 編
號」

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-701
About                           : 0f8e1956-a8ed-11de-0000-3ed0b2a287e4
Producer                        : AFPL Ghostscript 8.54
Modify Date                     : 2009:09:21 17:36:29+08:00
Create Date                     : 2009:09:21 17:31:06+08:00
Creator Tool                    : PDFCreator Version 0.9.2
Metadata Date                   : 2009:09:21 17:36:29+08:00
Document ID                     : 0f8e1956-a8ed-11de-0000-3ed0b2a287e4
Instance ID                     : uuid:c78ef2ef-4c01-4ddc-ab56-5d5f16fa4be2
Format                          : application/pdf
Title                           : User Manual
Creator                         : eden
Page Count                      : 10
Author                          : eden

EXIF Metadata provided by EXIF.tools