HON HAI PRECISION IND WINA2 WiFi 11 b/g/n module User Manual WIN A2 030211

Download:
Mirror Download [FCC.gov]
Document ID	1427421
Application ID	A05HTcRd4vtiXPGECl25LA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.1kB (76265 bits)
Date Submitted	2011-03-07 00:00:00
Date Available	2011-03-07 00:00:00
Creation Date	2017-11-06 07:49:46
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-11-06 07:49:46
Document Title	Microsoft Word - WIN-A2_User manual_030211.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Mika

ʳʳʳʳʳʳʳʳʳʳʳʳʳʳWIN-A2 WIFI Module
User Manual
Rev. 0.01
Confidential
Department
Name
Hardware Engineering
GaoJian
Confidential
Review Dates
Plan
Results
1. Introduction
Project Name: 802.11b/g/n WIFI module.
This documentation describes the product specification of the WIFI
802.11b/g/n module, it is a confidential document of FOXCONN.
1.1 Scope
The device provide communications for applications operating in the
globally available 2.4GHz unlicensed ISM band, which utilizing direct
sequence spread spectrum and OFDM/CCK technology, the maximum
data rate can reach to 65 Mbps(MCS7) for HT20.
1.2 Function
¾ Support single-band IEEE 802.11b/g and handheld device class
802.11n.
¾ 1x1 single stream with antenna diversity.
¾ SDIO v2.0 4bit mode interface support.
¾ Full support for power saving modes.
Confidential
2. Product Specification
2.1 Output Center And Symbol Clock Frequency Tolerance
Center frequency tolerance
CH1/CH7/CH13
Spec. (ppm)
+/-25
2.2 RF Specification
2.2.1 Spectrum Mask spec
Mode of Operation 802.11g
802.11 g at r 9 MHz Offset
802.11 g at r 11 MHz Offset
802.11 g at r 20 MHz Offset
802.11 g at r 30 MHz Offset
Mode of Operation 802.11b
802.11b at +/-11MHz~+/-22MHz Offset
802.11b at >+22MHz,<-22MHz Offset
Mode of Operation 802.11n-HT20
802.11n at r9 MHz offset
802.11n at r11 MHz offset
802.11n at r20 MHz offset
802.11n at r30 MHz offset
Confidential
Specifications
0 dBr
-20 dBr
-28 dBr
-40 dBr
Specifications
-30 dBr
-50 dBr
Specifications
0 dBr
-20 dBr
-28 dBr
-45 dBr
2.3 Electrical Specification
2.3.1 Absolute Maximum Ratings
The specification indicates levels where permanent damage to the device
can occur. Functional operation is not guaranteed under these conditions.
Operation at absolute maximum conditions for extended can adversely
affect long-term reliability of the device.
Rating
Symbol
Value
Unit
DC supply voltage for the device
VDD
-0.5~6
2.3.2 Recommended operating condition
Parameter
Minimum
Typical
Maximum
Unit
DC Supply Voltage
3.3ʳ
3.6
[v]
2.3.3 Current consumption in active on WLAN modes
Confidential
3. Mechanical Drawing
Confidential
4. Regulatory Information
USA-Federal Communications Commission (FCC)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Caution
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Labeling
Hon Hai Precision WiFi 11b/g/n module WIN-A2 labeled as below.
FCC ID: MCLWINA2
The proposed with FCC ID label format is to be placed on the module. If FCC ID is not
visible when the module is installed into the system, “Contains FCC ID: MCLWINA2”
shall be placed on the outside of final host system.
Caution: Exposure to Radio Frequency Radiation.
To comply with FCC RF exposure compliance requirements, a separation distance of at
least 20 cm must be maintained between the antenna of this device and all persons.
This device must not be co-located or operating in conjunction with any other antenna
or transmitter.
Confidential
Canada-Industry Canada (IC)
This device complies with RSS 210 of Industry Canada.
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause
undesired operation of this device.
The term “IC” before the equipment certification number only signifies that the Industry
Canada technical specifications were met.
Caution: Exposure to Radio Frequency Radiation.
To comply with IC RF exposure compliance requirements, a separation distance of at
least 20 cm must be maintained between the antenna of this device and allpersons.
This device must not be co-located or operating in conjunction with anyother antenna
or transmitter.
Confidential

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : Mika
Create Date                     : 2011:03:07 10:49:11+09:00
Modify Date                     : 2011:03:07 10:49:44+09:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2011:03:07 10:49:44+09:00
Producer                        : Acrobat Distiller 9.4.2 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - WIN-A2_User manual_030211.doc
Creator                         : Mika
Document ID                     : uuid:3d396264-4053-4779-94ac-8788b3ab1fef
Instance ID                     : uuid:ac3fe05d-053b-4c33-9abe-015f9bb971c5
Page Count                      : 8

EXIF Metadata provided by EXIF.tools