HON HAI PRECISION IND WINB1 Bluetooth Module User Manual J27H022 00
HON HAI Precision Ind. Co., Ltd. Bluetooth Module J27H022 00
Users Manual
COMPANY CONFIDENTIAL WIN-B1 J27H022.00 Bluetooth Module User Manual Rev. 1.0 Prepared by Gallon Tao Reviewed by Approved by COMPANY CONFIDENTIAL Index 1. REVISION HISTORY...................................................................................................................................................3 2. INTRODUCTION ..........................................................................................................................................................4 3. PRODUCT SPECIFICATION .....................................................................................................................................5 4. PRODUCT REQUIREMENTS AND CHARACTERISTIC......................................................................................6 5. ANTENNA SPECIFICATION .....................................................................................................................................7 6. MECHANICAL DRAWING .......................................................................................................................................11 7. SCHEMATIC ...............................................................................................................................................................11 COMPANY CONFIDENTIAL 1. Revision History Date Change Note REV Note 2010-09-20 Initial Release 1.0 COMPANY CONFIDENTIAL 2. Introduction Project Name: Bluetooth 2.1+EDR module This documentation describes the product specification of the Bluetooth 2.1+EDR module. It is a confidential document of Foxconn. 2.1 Scope This Bluetooth module is available in the 2.4-GHz ISM band, it is compatible with Bluetooth specification v2.1+EDR. It supports basic rate of 1Mbps with GFSK modulation, and EDR 2Mbps for DQPSK and 3Mbps for 8DPSK. 2.2 Function ¾ ¾ ¾ ¾ ¾ ¾ Class 2 specification RF output power (max +4 dBm) Full piconet and scatternet operation Supports 2Mbps, 3Mbps Enhanced Data Rate. USB 2.0 full-speed compliant interface Full support for power saving modes FW via on-line downloading and upgrade COMPANY CONFIDENTIAL 3. Product Specification 3.1 WiFi RF Specification Bluetooth Standards v2.1+EDR Operating Frequency 2.400 – 2.4835 Data Rate Basic Rate: 1Mbps Enhanced Data Rate: 2Mbps, 3Mbps GFSK(1Mbps), DQPSK(2Mbps), 8DPSK(3Mbps) Modulation Schemes Transmitter Output Power GFSK Transmitter Output Power: -6dBm~ +4dBm (Class 2 Specification) EDR Relative Transmit Power: (PGFSK-4dB) < PDPSK < (PGFSK+1dB) Receiver Sensitivity Typical -87dBm @1Mbps (PER<0.1%) Typical -89dBm @2Mbps (PER<0.01%) Typical -85dBm @3Mbps (PER<0.01%) 3.2 Electrical Specification Absolute Maximum Ratings These specification indicate levels where permanent damage to the device can occur. Functional operation is not guaranteed under these conditions. Operation at absolute maximum conditions for extended can adversely affect long-term reliability of the device. Rating Symbol Value Unit DC supply voltage for the device VDD 3.0~3.6 Recommended Operating Condition Element Symbol Value Minimum DC supply voltage for the device VDD 3.0 Typical 3.3 Unit Maximum 3.6 Function operation is not guaranteed outside this limit, and operation outside this limit for extended periods can adversely affect long-term reliability of the device. Current Consumption Idle: 8mA @3.3V Transmit: 30mA @3.3V Receive: 28mA @3.3V Regulatory Information USA-Federal Communications Commission (FCC) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Labeling Hon Hai Precision Bluetooth module WIN-B1 labelled as below. FCC ID: MCLWINB1 The proposed with FCC ID label format is to be placed on the module. If FCC ID is not visible when the module is installed into the system, “Contains FCC ID: MCLWINB1” shall be placed on the outside of final host system. Caution: Exposure to Radio Frequency Radiation. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Canada-Industry Canada (IC) This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of this device. The term “IC” before the equipment certification number only signifies that the Industry Canada technical specifications were met. Caution: Exposure to Radio Frequency Radiation. To comply with IC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : Iver_Tao Create Date : 2010:10:13 16:45:53+09:00 Modify Date : 2010:10:15 09:48:43+09:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2010:10:15 09:48:43+09:00 Creator Tool : PScript5.dll Version 5.2 Format : application/pdf Title : Microsoft Word - J27H022.00_User manual.doc Creator : Iver_Tao Document ID : uuid:c05d15c6-ae9a-4e57-9d0a-cac7148da1e7 Instance ID : uuid:c183aaad-dd17-4481-8a62-6a0c394e8af3 Producer : Acrobat Distiller 9.4.0 (Windows) Page Count : 7EXIF Metadata provided by EXIF.tools