HON HAI PRECISION IND WINB1 Bluetooth Module User Manual J27H022 00

HON HAI Precision Ind. Co., Ltd. Bluetooth Module J27H022 00

Users Manual

COMPANY CONFIDENTIAL J27H022.00 Bluetooth Module User Manual Rev. 1.0 Prepared by Reviewed by Approved by Gallon Tao WIN-B1
COMPANY CONFIDENTIAL Index 1. REVISION HISTORY...................................................................................................................................................3 2. INTRODUCTION ..........................................................................................................................................................4 3. PRODUCT SPECIFICATION .....................................................................................................................................5 4. PRODUCT REQUIREMENTS AND CHARACTERISTIC......................................................................................6 5. ANTENNA SPECIFICATION .....................................................................................................................................7 6. MECHANICAL DRAWING .......................................................................................................................................11 7. SCHEMATIC ...............................................................................................................................................................11
COMPANY CONFIDENTIAL 1. Revision History Date Change Note REV Note 2010-09-20 Initial Release 1.0
COMPANY CONFIDENTIAL 2. Introduction Project Name: Bluetooth 2.1+EDR module This documentation describes the product specification of the Bluetooth 2.1+EDR module. It is a confidential document of Foxconn. 2.1 Scope This Bluetooth module is available in the 2.4-GHz ISM band, it is compatible with Bluetooth specification v2.1+EDR. It supports basic rate of 1Mbps with GFSK modulation, and EDR 2Mbps for DQPSK and 3Mbps for 8DPSK. 2.2 Function ¾ Class 2 specification RF output power (max +4 dBm) ¾ Full piconet and scatternet operation ¾ Supports 2Mbps, 3Mbps Enhanced Data Rate. ¾ USB 2.0 full-speed compliant interface ¾ Full support for power saving modes ¾ FW via on-line downloading and upgrade
COMPANY CONFIDENTIAL 3. Product Specification 3.1 WiFi RF Specification Bluetooth Standards v2.1+EDR Operating Frequency 2.400 – 2.4835 Data Rate Basic Rate: 1Mbps Enhanced Data Rate: 2Mbps, 3Mbps Modulation Schemes GFSK(1Mbps), DQPSK(2Mbps), 8DPSK(3Mbps) Transmitter Output Power GFSK Transmitter Output Power: -6dBm~ +4dBm (Class 2 Specification) EDR Relative Transmit Power: (PGFSK-4dB) < PDPSK < (PGFSK+1dB) Receiver Sensitivity Typical -87dBm @1Mbps (PER<0.1%) Typical -89dBm @2Mbps (PER<0.01%) Typical -85dBm @3Mbps (PER<0.01%) 3.2 Electrical Specification Absolute Maximum Ratings These specification indicate levels where permanent damage to the device can occur. Functional operation is not guaranteed under these conditions. Operation at absolute maximum conditions for extended can adversely affect long-term reliability of the device. Recommended Operating Condition Value Element Symbol Minimum Typical Maximum Unit DC supply voltage for the device VDD 3.0 3.3 3.6 V Function operation is not guaranteed outside this limit, and operation outside this limit for extended periods can adversely affect long-term reliability of the device. Current Consumption Idle: 8mA @3.3V Transmit: 30mA @3.3V Receive: 28mA @3.3V Rating Symbol Value Unit DC supply voltage for the device VDD 3.0~3.6 V
Regulatory Information USA-Federal Communications Commission (FCC) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Labeling Hon Hai Precision Bluetooth module WIN-B1 labelled as below. FCC ID: MCLWINB1 The proposed with FCC ID label format is to be placed on the module. If FCC ID is not visible when the module is installed into the system, “Contains FCC ID: MCLWINB1” shall be placed on the outside of final host system. Caution: Exposure to Radio Frequency Radiation. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Canada-Industry Canada (IC) This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of this device. The term “IC” before the equipment certification number only signifies that the Industry Canada technical specifications were met. Caution: Exposure to Radio Frequency Radiation. To comply with IC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu