HP MFP Analog Fax Accessory 700 Guide ENWW C05791986

• Overview
  • Introduction
  • HP MFP Analog Fax Accessory 700 features
  • Parts included with the fax accessory
• Install the fax accessory
  • Install the fax accessory
  • Connect the fax accessory to a phone line
  • Verify fax operation
  • Update firmware
• Set up fax
  • Introduction
  • Required fax settings
  • Set up fax by using the printer control panel
• Change fax configurations
  • Introduction
  • Fax dialing settings
  • General fax send settings
  • Fax receive settings
• Send a fax
  • Send a fax
  • Additional fax tasks
• Improve fax image quality
• Solve fax problems
  • Checklist for solving fax problems
    • What type of phone line are you using?
    • Are you using a surge-protection device?
    • Are you using a phone company voice-messaging service or an answering machine?
    • Does your phone line have a call-waiting feature?
    • Check fax accessory status
  • General fax problems
    • The fax failed to send
    • An Out of Memory status message displays on the printer control panel
    • Print quality of a photo is poor or prints as a gray box
    • You selected the Stop button to cancel a fax, but the fax was still sent
    • No fax address book button displays
    • Not able to locate the Fax settings in HP Web Jetadmin
    • The header is appended to the top of the page when the overlay option is enabled
    • A mix of names and numbers is in the recipients box
    • A one-page fax prints as two pages
    • A document stops in the document feeder in the middle of faxing
    • The volume for sounds coming from the fax accessory is too high or too low
• Specifications
  • Fax accessory product specifications
  • Replacement parts and accessories
• Index