HP Workstation X4000 Technical Reference Manual Windows And Linux (A6068 IE001 E0601) Lpv37863

• 1 System Overview
  • Overview
  • HP x4000 Workstation Feature Set
  • Internal and External Components
  • HP x4000 Control Panel
  • Internal Features
  • Documentation
    • HP Web Site Contents
• 2 System Board
  • Overview
  • System Board Component Layout
    • System Board Switches
    • Architectural Diagram
  • System Chipset
    • Memory Controller Hub (Intel 860)
    • PCI 64-bit Hub (Intel 82086)
    • Interface Controller Hub (Intel 82801BA)
    • Super I/O Chip (National PC87366)
    • LAN Chip (Intel 82550)
    • SCSI Controller Chip (LSI SYM43C1010R)
    • Audio Chip (Analog Devices AD 1885)
    • Hardware Management Controller Chips
    • Clocks
  • Expansion Card Slots
    • Peripheral Component Interconnect (PCI) Slots
    • Accelerated Graphics Port (AGP) Slot
• 3 System Memory and Processors
  • Overview
  • System Memory
    • Rambus
    • Eight-RIMM MEC
  • Processor
• 4 System BIOS and Resources
  • Overview
  • System BIOS
    • BIOS Identification
    • Updating the System BIOS and Firmware
    • Restoring BIOS Default Settings
    • Clearing the CMOS
    • Recovering the BIOS from the Boot Block
  • HP Setup Program
    • Starting the HP Setup Program
    • Main Menu
    • Advanced Menu
    • Security Menu
    • IPMI Menu
    • Power Menu
    • Boot Menu
  • BIOS Beep Codes
  • System Resources
    • PCI IRQ Lines
    • IRQ Routing
    • Interrupt Controllers
    • System Memory Map
    • I/O Port Map (I/O Addresses Used by the System
    • DMA Channel Controllers
• 5 Hardware Management (Monitoring and Reporting)
  • Overview
  • General Firmware Information
    • Date/Time Initialization
    • SEEPROM Organization
  • Hardware Monitoring
    • Built-in Self Test (BIST)
    • Sensor Scan
    • Fan Control
    • Sense Power State
    • Chassis Intrusion
    • Pre-boot Device Test
    • PCI/AGP Power
  • Reporting
    • Event Logging
    • Sensor Report Using IPMI
    • System Event Log (SEL)
    • Power Status LED
    • Diag LEDs
    • Firmware Failure Handling
    • BIOS is Running OK
    • IPMI Platform Event Trap
  • Security
    • Lock Status Panel
    • BIOS Configuration Tokens
• 6 Power Specifications
  • Power Delivery
  • Power Supply
    • Power Supply Specifications
    • Resetting the Power Supply
    • Power Consumption and Cooling
  • Power Saving and Ergonometry
    • Using Power Management
    • Power Saving Modes and Resume Events
• 7 Connector Pin-Outs
  • Expansion Slots
    • Peripheral Component Interconnect (PCI) Slots
    • Accelerated Graphics Port (AGP) Slot
  • System Board Connectors
    • Floppy Disk Drive Connector
    • IDE/ATA 100 Connectors
    • SCSI Connectors
    • Parallel Port Connector
    • Serial Port Connectors
    • Keyboard and Mouse Connector
    • Universal Serial Bus Connectors
    • Front Panel Connector
    • ATX Power Connector
    • LAN Connector
    • Audio Connector
    • CD Audio In Connector
    • Microphone Connector
    • System Speaker Connector
    • Processor Fan Connectors
    • Chassis Fan Connectors
    • Chassis Intrusion Connector
• 8 Mechanical Specifications
  • System Fans and Air Flow
  • Physical Specifications
  • Environmental Specifications
• 9 Hardware Components
  • Overview
  • Graphics Cards
    • Matrox Millennium G450 Graphics Card
    • nVIDIA Quadro2 MXR
    • nVIDIA Quadro2 Pro
    • Fire GL2 and Fire GL4
  • Mass Storage Devices
    • Flexible Disk Drives
    • Hard Disk Drives
    • Optical Drives
  • Rear Panel Connectors
• 10 Installing or Replacing Parts and Accessories
  • Overview
  • Cover and FrontBezel
    • Removing the Left Side Cover
    • Removing the Front Bezel
    • Replacing the Cover and Front Bezel
  • Hard Disk Drive Cage
    • Opening the Hard Disk Drive Cage
    • Closing and Securing the Hard Disk Drive Cage
  • Chassis Beam Assembly
    • Removing the Chassis Beam Assembly
    • Installing the Chassis Beam Assembly
  • Memory Expander Card (MEC)
    • Removing the MEC
    • Installing the MEC
  • System Memory
    • Upgrading Memory on the 8-RIMM MEC
    • Installing Memory
  • Graphics Card
    • Removing a Graphics Card
    • Installing a Graphics Card
  • SCSI Hard Drive
    • Removing a SCSI Hard Disk Drive
    • Setting SCSI IDs for a New Hard Disk Drive
    • Installing a SCSI Hard Disk Drive
  • CD-ROM, CD-RW or DVD
    • Determining IDE Connections
    • Removing a CD-ROM, CD-RW, or DVD
    • Installing a CD-ROM, CD-RW or DVD
    • Load the Software Applications for Your CD-RW
  • Processor
    • Removing a Processor
    • Installing a Processor
    • Updating Your Operating System
  • Floppy Disk Drive
    • Removing the Floppy Disk Drive
    • Installing the Floppy Disk Drive
  • Power Supply
    • Removing the Power Supply Unit
    • Installing the Power Supply Unit
  • System Board
    • Removing the System Board
    • Installing the New System Board
  • System Board Switches
  • System Fan
    • Removing the System Fan
    • Installing the System Fan
  • Fan and Speaker Assembly
    • Removing the Fan and Speaker Assembly
    • Installing the Fan and Speaker Assembly
  • Hard Disk Drive Fan
    • Removing the Hard Disk Drive Fan
    • Installing the Hard Disk Drive Fan
  • Battery
    • Replacing the System Battery
  • System Board Diagram
• 11 Troubleshooting
  • Overview
  • Solving Hardware Problems
    • Workstation Does Not Start Properly
    • Keyboard Doesn’t Work
    • Monitor Doesn’t Work
    • Mouse Doesn’t Work
    • Audio Doesn’t Work
    • Power LED is Flashing
    • Hard Disk Drive Problems
    • Hard Disk Drive Activity LED Doesn’t Work
    • CD-ROM, DVD or CD-RW Drive Doesn’t Work
    • CD-RW Won’t Allow Recording
    • DVD Drive Doesn’t Play DVD Video
    • You Forgot Your Password
  • Understanding the Diag LEDs
  • Setting and Removing System Passwords
    • Setting Passwords
    • Removing Passwords
  • Using e-Diag Tools for Hardware Problems
    • Starting e-Diag Tools from the Hard Drive’s Utility Partition (Recommended Method)
    • Starting e-Diag Tools from the
  • Recovering or Reconfiguring Windows 2000 or Windows NT
    • Preparing to Recover Windows NT or Windows 2000
    • Performing a Full Recovery of Windows NT or Windows 2000
• 12 Contacting Support
  • Online Support for Troubleshooting
  • Documentation Set Overview
  • Hewlett-Packard Support and Information Services
    • Collecting Information Before Contacting HP Support
  • HP Customer Care Center Phone Numbers