HSM EWC-4000 Wireless charger User Manual HLCRIO132 FCC ID 2ABS5 EWC 4000

Download:
Mirror Download [FCC.gov]
Document ID	2542142
Application ID	3Vm2vWfPTiXhAubFbIaWzQ==
Document Description	HLCRIO132(FCC ID 2ABS5-EWC-4000)_User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	223.35kB (2791912 bits)
Date Submitted	2015-02-27 00:00:00
Date Available	2015-02-27 00:00:00
Creation Date	2014-03-03 14:00:06
Producing Software	Adobe PDF Library 8.0
Document Lastmod	2014-12-09 15:44:53
Document Title	HLCRIO132(FCC ID 2ABS5-EWC-4000)_User manual
Document Creator	Adobe InDesign CS3 (5.0)

MODEL: HLCRIO132
(Easy One Touch Wireless Qi Standard Charging Car Mount)
How to use HLCRIO132
HLCRIO132 Includes,
1. Place HLCRIO132 on where necessary and connect it to power source.
MODEL: EWC-3000
(Easy Flex One Touch Wireless Charging Mount)
* A. Powerful Gel Suction enables the unit to be used in wide area such as at home, at the office and
even in the car staying on the textured dashboard tightly.
B. When HLCRIO132 is properly connected to power source, LED light turns to Orange
User Manual & Limited Warranty
2. Place the phone on the unit. The Phone have to
be equiped with ‘RECEIVER’
* Wireless charging Receiver is not included in the package
HLCRIO132
User Manual & Warranty
* Extend the arms of the unit. Place your phone into mount
and slightlly push to work ‘one touch button’ to lock.
3. If the unit placed properly, Green light turns on
and flickers. If Orange light flickers, use ‘Bottom
extendable bracket’ and move the phone up and
down until the Green light turns on. When the
‘Bottom bracket release button’ is pushed, the
‘Bottom extendable bracket’ will be pulled up
and down.
4. When fully charged, Green LED light stops flickering.
* Check the charging status through charging icon on your smart phone.
* Foreign material between the phone and charing mount or poorly adjusted ‘Bottom extendable
bracket’ may block charging.
HLCRIO132 properly acquired qi Certificate from WPC(Wireless Power Consortium)
HSM Co., Ltd
www.hsmtech.com
LED Status Indicator
Charge status
Orange
Connected to power source
Orange flickers
Phone is not installed to the mount properly, RX doesn’t meet TX
Green flickers
Charging
Green
Fully charged
Product Overview
Cigar Charger (Option)
Safety Precautionst
Limited
구 성Warranty
품
Specification
These saftey precasutions are for keeping users away from danger along with loss of property.
Model no.
HLCRIO132
HSM warrants this product and all parts thereof, only to the original end-user purchaser to
Read these safety precautions before using HLCRIO132.
Color
Black
be free from defective materials and workmanship for first twelve(12) months beginning on
HSM takes no responsibilities for any injuries and damages caused by not following below notice.
Material
PC ABS
the date of purchase of the product.
Dimension
89*102*81mm
Customer center: 822-573-5466
Weight
200g
Wireless Technology
Qi standard
▶ Do not operate the unit during the driving. It may cause accident.
Input Voltage
5.0V
▶ Do not use broken power cords, plugs and loosened sockets.
Charging port
Micro USB
▶ Do not touch plugs with wet hands or remove the power pulling cords with force.
Suction type
Sticky suction Gel Pad
▶ Do not install HLCRIO132 on where interferes with driving.
Avoid Gear, Handle, Brake, Airbag depolyment zone in the car
2.0A
▶ Do not bend the power cord with force.
▶ Do not place your unit near metal objects such as coins, keys, cell phones, jewelries.
▶ Charging battery process may cause heat. When heat get sever, stop charging
the unit and cool it down.
▶ Touching overheated unit with bare hands can cause skin burn includes red rash and
pigmentation on skin.
▶ Do not store or exposure your unit to flammable objects such as gas stoves,
microwave oven or high pressure container. This can cause fire or accident
FCC compliance statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
▶ Do not keep the unit on a sloped surface. This may cause damage to the unit or break
components inside.
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
▶ Keep the unit away from small children or pet, not to be bitten or sucked. This may
damage your unit or cause fire.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
ing, water or other liquid intrusion, fire, flood, accident, negligence, misuse or improper
2) Product that has been damaged due to installation, repairs, alteration or modification by
unauthorized service organization or person.
3) Defects or parts requiring replacement due to the ordinary wear and tear, corrosion rust
or stains, scratches, dents on the casing or pair work of the products.
This warranty covers only United States.
Product Name
provide reasonable protection against harmful interference in a residential installation.
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
▶ Use this unit for original purpose only.
to try to correct the interference by one or more of the following measures:
▶ Do not disassemble, modify or repair the unit. It can cause electric shock.
—Reorient or relocate the receiving antenna.
▶ Limited warranty does not cover the unit which has unauthorized disassembling,
modification ro repairs.
1) Claims for loss of use/inconveniences due to any malfunction, damage caused by light
handling/operation.
FCC Compliance statements
▶ Do not drop the unit or exposure it to external shock.
▶ Keep the unit in a dry circumstance. Prolonged exposure to moisture cuase damage
to the parts and curcuit board.
The limited warranty does not cover,
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Warning : During operation, the user must keep a minimum separation distance of 10 cm with the RF devices.
Purchase date
Purchase place
Easy Flex Wireless
Charging Mount
Model
Price
HLCRIO132

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Instance ID                     : uuid:58188a21-d986-462c-a4f2-86ea31fe3475
Document ID                     : adobe:docid:indd:a4325841-a290-11e3-9dda-8f21e2bf39c5
Rendition Class                 : proof:pdf
Derived From Instance ID        : 4e34bc84-921e-11e3-859c-ec0c537b5f9c
Derived From Document ID        : adobe:docid:indd:478aef27-91ec-11e3-9d5a-863561449486
Create Date                     : 2014:03:03 14:00:06+09:00
Modify Date                     : 2014:12:09 15:44:53+09:00
Metadata Date                   : 2014:12:09 15:44:53+09:00
Creator Tool                    : Adobe InDesign CS3 (5.0)
Thumbnail Width                 : 256
Thumbnail Height                : 100
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 11979 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : True
Max Page Size W                 : 765.353516
Max Page Size H                 : 297.638184
Max Page Size Unit              : Pixels
Font Name                       : YDIYGO350, Helvetica65-Medium, YDIYGO340, YDIYGO320
Font Family                     : YDIYGO350, Helvetica65 Medium, YDIYGO340, YDIYGO320
Font Type                       : Unknown, Unknown, Unknown, Unknown
Font Version                    : Version 5.01, Version 5.01, Version 5.01, Version 5.01
Font Composite                  : False, False, False, False
Font File Name                  : gulim.ttc, gulim.ttc, gulim.ttc, gulim.ttc
Font Face                       : Medium
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 기본 견본 그룹
Swatch Groups Group Type        : 0
Page Count                      : 2
Creator                         : Adobe Illustrator(R) 16.0
For                             : Administrator,
Title                           : EWC-3000_User manual.pdf
Bounding Box                    : 0 0 766 298
Container Version               : 11
Creator Version                 : 16
Image Height                    : 298
Image Width                     : 766
Image Size                      : 766x298
Megapixels                      : 0.228

EXIF Metadata provided by EXIF.tools