HTC 2PQ7 Heart Rate Monitor User Manual

HTC Corporation Heart Rate Monitor Users Manual

UserManual.wiki >

2PQ7 User Manual >

Contents

1. Users Manual-Safety regulatory
2. Users Manual

Users Manual

Download the full user guide from http://www.htc.com/supportQuick Start Guide( UA will replace cover page )

English2Connecting your UA Heart RateTo set up and enjoy all the features of your UA Heart Rate, you’ll need to connect it to your phone using the UA Record™ mobile app.TODAYHOURS4:55 STEPS10,345BURNED475CALORIES525HOW DO YOU FEEL?Download and install UA Record™ from the iOS App Store or Google Play store.

English3Pairing your UA Heart Rate to your phone1. Launch the UA Record™ app and create an account.2. Choose from the list of devices to connect.3. Follow the on-screen instructions to pair your UA Heart Rate to your phone and UA Record™ account.Note: If you already have the UA Record™ app, sign in and tap the icon on the ‘My Record’ page and then choose from the list of available devices.

English4About your UA Heart RateUse your UA Heart Rate to track your heart rate zones while you exercise, get more accurate calorie burn stats and sync it with your UA Record™ prole. Once you start a workout in UA Record™ or on your UA Band, your UA Heart Rate will provide HR data. Strap adjuster Heart rate monitorHook SensorsChest strap

English5Turning on your UA Heart Rate 1. Attach the module to the chest strap. Make sure the dot on the top of the module is facing upwards.2. Remove the sensor pad covers and then touch both sensor pads on the back of the chest strap. UA Heart Rate turns on with skin contact.3. A blue light will start flashing on your UA Heart Rate to indicate it is now ready to be paired with UA Record™.Note: • If the blue light does not start ashing when touching the sensors on the strap, try moistening your chest strap sensor pads with a few drops of water or saliva and then touch again. • If your battery power is too low, the UA Heart Rate will be ashing red for 10 seconds after it starts. Your battery will need to be replaced.

English6Wearing your UA Heart Rate1. Adjust the chest strap so the length is approximately the same as your chest measurement.2. Wrap the chest strap around your upper torso just beneath your pectoral muscles. 3. Insert the hook on one end of the chest strap into the loop at the other end.Note: • Do not fold at or crease the chest strap. Roll the chest strap to store.• Remove the Heart Rate module before washing the chest strap.

English7Replacing your UA Heart Rate batteryIf the power on your UA Heart Rate is low, the blue light will not turn on. For optimal performance, replace your battery as described below: 1. Using a coin, open the back battery compartment door on your UA Heart Rate module.2. Remove the old battery and insert a new battery (CR2032). 3. Secure the battery compartment door back onto the UA Heart Rate module.