HTC CARA100 Car StereoClip(AUX) User Manual

HTC Corporation Car StereoClip(AUX) Users Manual

Users Manual

CAR A100HTC StereoClip (AUX)User Guidehttp://www.htc.com/www/support/warranty.html
1EnglishOverviewThank you for purchasing the HTC StereoClip (AUX). The HTC StereoClip (AUX) is an accessory that Bluetooth enables your car audio system. This User Guide will get you started and ready to make the most of your HTC StereoClip (AUX). About your HTC StereoClip (AUX)HTC StereoClip (AUX)Control button HTC StereoClip (AUX) capLED indicatorUSB port3.5mm audio jack The Control button on HTC StereoClip (AUX) performs different functions depending on how long you press it.- Press: Less than 4 seconds- Press and hold: more than 4 seconds
2EnglishFeatures•  Bluetooth 2.1 + EDR (Minimum)•  Supports Advanced Audio Distribution Prole (A2DP)•  Supports CSR aptX™ codec•  Stereo output to 3.5mm audio jack•  Bluetooth Simple Secure Pairing•  Auto-pairing with selected HTC phones or tablets•  Automatic power off to conserve battery power•  Battery capacity: 85mAh- Play time: up to 5 hrs- Standby: 120 hrsGetting StartedCharging your HTC StereoClip (AUX)Before using HTC StereoClip (AUX) for the rst time, you need to charge it using the micro-USB cable. Normal charge takes approximately 2 hours.1. Connect one end of the USB cable to the USB port of HTC StereoClip (AUX).2. Connect the other end of the USB cable to a computer or a power adaptor. Note:When the battery needs charging, the Red LED blinks slowly. If you do not charge HTC StereoClip (AUX), it turns itself off before battery depletes.
3EnglishTurning the HTC StereoClip (AUX) on and off•  To turn on HTC StereoClip (AUX), press the Control button. The Green LED lights for 1 second and then goes off. •  To turn off HTC StereoClip (AUX), press and hold the Control button. The Red LED lights for 1 second and then goes off. Pairing with mobile devicesHTC StereoClip (AUX) needs to be paired with your phone or tablet before it can be used. When the devices are successfully paired and active, the Green LED blinks 3 times in succession every 5 seconds.Note:HTC StereoClip (AUX) also supports “auto-pairing” with selected HTC phones which support HTC Car.1. Turn on the Bluetooth feature on your mobile device.2. Press and hold the Control button to turn HTC StereoClip (AUX) on. The Green LED blinks quickly, indicating HTC StereoClip (AUX) is in pairing mode.3. Set your mobile device to search for Bluetooth devices, and select “HTC Car A100” from the search results.Note:HTC StereoClip (AUX) can store pairing information of up to eight devices.
4EnglishConguring HTC Car for auto-pairing1. Turn on your phone and launch HTC Car application. 2. On the HTC Car main panel, tap the status icons to enter the HTC Car’s settings. 3. Make sure “Auto-connect” is selected and “Default audio-out accessory” is set to “HTC Car Bluetooth audio-out accessory”. 4. When HTC StereoClip (AUX) is in pairing mode, the phone will automatically pair and connect to it.Connecting to the car audio system1. Remove the HTC StereoClip (AUX) cap and plug the HTC StereoClip (AUX) into the audio input (AUX) of the car audio system.2. Turn on the car audio system.3. Play the media les on your phone or tablet. Car audio system
5EnglishReconnecting HTC StereoClip (AUX) to mobile devicesWhen HTC StereoClip (AUX) is turned off then on again, it will attempt to re-establish the connection to your phone or tablet automatically. Alternatively, press the Control button to re-establish the connection manually.What the LED indicator meansEvent LED color & behavior StatusPower offGreen for 1 second then Off Powering OnFlash Red for 4 seconds Inadequate battery power to power on Solid Red Battery is chargingSolid Green Battery is fully chargedPower onFast Flash Green Pairing modeFlash Green 3 times in succession every 5 secondsDevices are successfully paired and activeFlash Red every 5 seconds Low batteryRed for 1 second then Off Powering Off
6EnglishTaking care of your HTC StereoClip (AUX)•  Always store HTC StereoClip (AUX) with the cap on.•  Avoid storing at extreme temperatures (above 45°C/113°F – including direct sunlight – or below -10°C/14°F). This can shorten battery life and may affect operation.•  Do not expose HTC StereoClip (AUX) to rain or other liquids.•  Never try to dismantle the product yourself. Contact authorised dealers or service centres for repair service.CerticationCEThis product is CE marked according to the provisions of the R & TTE Directive (99/5/EC). Hereby, HTC, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.For further information please consult http://www.HTC.comWithin the EU this device is intended to be used in Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, The Netherlands, United Kingdom, and within EFTA in Iceland, Norway and Switzerland.BluetoothThe Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by HTC is under license. Other trademarks and trade names are those of their respective owners.
7EnglishCompatibility for a Better EnvironmentThe Directive on Waste Electrical and Electronic Equipment (WEEE), which entered into force as European law on the 13th February 2003, resulted in a major change in the treatment of electrical equipment at end-of-life.The purpose of this directive is, as a priority, the prevention of WEEE, and in addition, to promote the reuse, recycling and other forms of recovery of such waste so as to reduce disposal.The WEEE logo on the product or on its box indicates that this product must not be disposed of or dumped with your other household waste. You are liable to dispose of all your electronic or electrical waste equipment by relocating over to the specied collection point for recycling of such hazardous waste. Isolated collection and proper recovery of your electronic and electrical waste equipment at the time of disposal will allow us to help conserving natural resources. Moreover, proper recycling of the electronic and electrical waste equipment will ensure safety of human health and environment. For more information about electronic and electrical waste equipment disposal, recovery, and collection points, please contact your local city centre, household waste disposal service, shop from where you purchased the equipment, or manufacturer of the equipment. FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference 
8Englishwill not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:- Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.FCC Caution •  Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. •  This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Industry Canada (IC) StatementThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)this device may not cause interference, and (2)this device must accept any interference, including interference that may cause undesired operation of the device.
9EnglishCanada, avis d’Industry Canada (IC) Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d’interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son fonctionnement. Informations concernant l’exposition aux fréquences radio (RF) La puissance de sortie émise par l’appareil de sans l HTC est inférieure à la limite d’exposition aux fréquences radio d’Industry Canada (IC). Utilisez l’appareil de sans l HTC de façon à minimiser les contacts humains lors du fonctionnement normal. NCC Statement根據NCC低功率電波輻射性電機管理辦法 規定:1.1 第十二條 1.2 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。1.3 第十四條 1.4 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
10English© 2012 HTC. All rights reserved. All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by HTC is under license.(Design and specications subject to change without notice).

Navigation menu